If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Is this a boiler problem or can I fix

garyh3 · 2006-07-12 14:40:51

Ok we have had a few issues with our new boiler. It about a year old. The PCB and IPCB and one other thing has been changed on the boiler. I have now noticed that every 2 months or so the pressure gauge goes to 3 bar. So I take out the water from a rad until its back to 1 bar and everything is fine. I watch the pressure…

Options

12-07-2006 3:40pm

#1

garyh3

Registered Users Posts: 700 ✭✭✭

Join Date: November 2004

Posts: 604

Ok we have had a few issues with our new boiler. It about a year old.

The PCB and IPCB and one other thing has been changed on the boiler. I have now noticed that every 2 months or so the pressure gauge goes to 3 bar. So I take out the water from a rad until its back to 1 bar and everything is fine. I watch the pressure gauge for about 2 weeks and everything is fine no change on the gauge. Then in about 2 months the release valve starts dripping water and the gauge is back to 3 bar.

Any ideas where or how the pressure is getting so high. Could it be a block as I don’t think the re-pressure valve is leaking?

any ideas

Garyh3

0