Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Photos of your Airsoft equipment.(NO DISCUSSION)
Options
Comments
-
WinGun'full metal super sport 7
CO2 airsoft revolver pistol with 4" barrel
Have no CO2 so have not got a clue how this fires.
Also I had no details with regards to the power of this gun
but RSOV did include a letter to Customs to say my stuff was under 1j
and toys/model guns and could not be modified to fire real bullets etc.
This is a sweet piece. It comes with 2 tactical rails to allow you to mount a
red dot site or laser pointer on the bottom. It also Comes with a speed loader
which is crap and does not hold the shells. When you pop the chamber there is barely
enough clearance to even attempt to use it.
Excellent feel when you manually cock the hammer and feel the chamber rotate.
Very solid piece and looks to be well made.
~B0 -
This is the Well hand cocking competition air pistol (P-362)
For sale on RSOV for 28 Euros not including shipping/Duties.
On Sale in Mmmad Cork Ireland for over 500 Euros. :eek:
Its a clone of the Maruzen APS-3
something I've wanted for a long time but its constantly out of stock
and even one the the Irish dealers could not get me one when I looked.
so eventually I bought the clone.
You cock the pistol, so it chambers a bb,(You need to do this first or the pump does not pressurize) then you use cock the pump once.
It fires almost silently and the quietness of is is a joy.
It feels great to hold and I mean great.
Unfortunately, the handgrip looks like it was made for someone with Tiny Small Hands
and you cant adjust it for bigger hands. so its too small for even an average pair
of adult hands. You can take the end bit off but it does not adjust.
(I may be wrong about this will check it out when I get to play with it a bit more)
[EDIT] Yes you can adjust the rest at the bottom of the pistol grip!
but it adjusts to make it shorter!!!
I dont see any hop up, the Power is rubbish it barely makes it 9-10m
and the BB's seem to curl off to the right and are completely inconsistent.
Trigger pull is very light and cool to fire.
If I wanted a precision airsoft pistol It looks like Im gonna have to wait until
I get get the Maruzen Brand one.
For anyone thats interested the Maruzen one is a beauty:
http://airsoft-barracks.com/page.php?79
~B0 -
Thought it was about time I uploaded some pics. :rolleyes:
This is my G&G Plastica upgraded with:
Dboys RAS,
Reshimmed Gearbox,
New Bearings,
Rewired to the stock tube,
Modified lower reciever and stock tube,
Fitted with a 7.4V lipo in the stock tube
Now I just to upgrade the reciever and barrel and my baby will be finsihed :P
0 -
I went on an evening course with FAS recently for 10 Woodworking sessions.
I learned nothing and they would not allow me to use some machinery for insurance
reasons but I did get to try and make something I wanted for a a while.
A Rotary Gun rack!!
It did not turn out like I expected.
I picked a height of 25-26 inches for the resting point for barrels
as with airsoft gear you would be dealing with different sizes guns.
An AK will rest comfortably here, and the longer stuff would not matter.
Its made from Mahogany, with a 12" lazy susan bearing in the base.
I am going to use danish oil to finish and polish it,
I realised that I cannot glue it together as when assembled it wont fit out
through any of the doors in my house. GRRRrrrr should have factored that into the design.
I had intended to have 2 tiers, one for short and one for long stuff but it did not work out. I thought the base dia of 30 inches would be enough to hold 21 Guns as this
is the diameter used for a rotary 21 gun shotgun rack. But as the design went on
and I started with a 30inch base it went from 21 guns all the way down to only 12.
I also wanted to have another layer on the base with pockets or slots cut out
so the butt stocks of the guns could rest on. and also shelves and a pistol section.
But its a work in progress so they can be added later.
Something that did not work out AT ALL, was the guns resting in pockets/slots in the base. because of the weight distribution and variety of shapes with all the different airsoft gear I have the butts needed to rest at different positions and the balance ment that they did not sit well on the top rest so could fall out when rotating the piece.
The Top tier has 3 semi-circular slots cut into the wood on each quadrant, 1 3inch dia, and 2x 2.5inch dia at
either side.
It would have been much easier if I could have brought all my guns into FAS but
that would have been a rather bad idea :-)
Will post final pics if I ever get around to finishing the project:
0 -
Guess its time for an update with the armoury.
Unfortunately these shots dont have the G&G M16 VN, G&P M16A3 with M203 or King Arms M7Troy which were all in the repair shop in work at the time.
Heres a family shot in my new storm case
ASG Dan Wesson 38
KWC 357 Magnum
ASG Dan Wesson 357
Revolvers
KJ Works M9
HFC USP
ASG Steyr M9-A1
TM Mp7
VFC HK 416
A&K Masada
0 -
Advertisement
-
theres a few pics coming soon of the Masada, its been given a revamp and is seriously gucci, but for now i'll leave you with an M4 GBB with added Eotech 551, Magpul err, magpuls... Magpul MOE hand guard and a fancier stock.
Just finished an order of a fore grip, MIAD grip, ambi mag release, ambi cqb sling mount etc etc. gonna order a new receiver too but there out of stock at the moment.
0 -
-
-
6mm gas m500 [home made hop unit, Steel charging handles]
My Nam/ww2 loadout so far [need camo
]
I only have the wood grips for potential Nam games, the rest of the time its got a pistol grip and is carried in my scabbard, Its easily my favorite gun.
the pics make it look a bit silver its more of a dark nickle colour in reality0 -
-
Advertisement
-
-
-
Here is a few pictures of what I have added to my collection over the last few months...
Maruzen APS Type 96 - with Bushnell 3-9x40 AOE Scope
Tokyo Marui Mac 10
Dboys Kar 98 K - wood stock, varnish looks very red so going to sand down and restain to a much darker finish
KWA M1911A1
KJW Full Metal Beretta 92FS
0 -
-
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
-
-
-
-
Advertisement
-
![[--SC(+)PE--]](https://wa.vanillicon.com/v2/a401412469ea73f42c6d9a1b932eaf12.svg)
Advertisement