Photos of your Airsoft equipment.(NO DISCUSSION)

Dragonmanirl

Just wanted a little run about for games in The Hive got it from Frostie.

came with 1 high cap, 2 120 mids and an 80 low cap.

Foxhole Norman

My newest and favorite baby, the G&G M14 EBR long:



So far it has performed fantastically in its first two CQB games and it will be getting its first Wood Land run out of Sunday.

Drachnien

Veering back to the pistol theme. This still needs some work but it's firing at least. there's a fair amount of filing needed to get it all to fit nicely and the mag release needed to be completely cut out. NOTE:I did not engrave this !!! it's a body kit for we glocks.

brenak47

Latest paint job will put up better pics another day.

mafo

Tokyo Marui vsr10.
Converted to Co2 (Adjustable fps from 0 - :eek: )
PDI hop-up chamber and R-hopped Prometheus TBB
Custom made silencer (50 inch total rifle length )

matty1994

My Custom CM16 Raider-L Gbbr V2
Element Ergo Grip
Magpul
Flip Up Sights, custom front sight post
220mm silencer, soon to be soundhog
Aimpoint Comp 2 Dot Sight
Magpul Stubby Grip

brenak47

My latest mod to my mp5 i got bored and fitted a m4 stock to it.

J-W

Think I'm done ...... with the externals at least

Foxhole Norman

The newest addition to the family, my new VFC M635:

Darth Phoenix

Howdy,

Here's a project I have being working on for a long while, I haven't finished the engraving on it but feck it, I'll show it to anyone If they want to see it once it is.
So why draw a wolf on it you say, well I'm sick of the normal crap and I like to be awkward and different about it.
It has a bit of the chris costa element to it with that weird hand to the front of the handguard grip which does work surprizingly for faster reflexes.
Grips are waaaaay more comfy than magpul one's and grips are postioned to suit my arm length.
So if you ever decide to go this route, just remember that the aeg you build is designed to suit you. So you could hand this to a mate and they might like it as the grip's aren't positioned to suit them. Just a bit of useless information for you there.

Crap, I'm starting to ramble, better post pictures














Thanks for looking,

DP

mack1984

Started life as an ICS M4 sport line. Added a metal body, new stock and a Daniel Defense RIS II that was black (sprayed a bronze colour)

Dusted with krylon for a worn look as I cant stand new looking guns.


image url

lillian2608

Hello...my name is Lillian and I am an airsoftaholic. It has been 2 weeks since my last skirmish. I even order stuff to have it opened by my little one and described to me in great detail. Here are some of my babies. Can't wait to get home to the MP9 and test drive it.

brenak47

So i picked u a colt 1911 anniversary model last week and it was a bit scratched up and as usual nothing stays the same with me.(i have a problem lol).Grips came off another kwc and modded to fit and trigger is out of a kjw 1911 and modded to fit.

thermo

image.jpg

My new one for the "collection", the Andy mc Nab endorsed AM 22.
Now to make a glass case for it..........

Rooky1

New arrivals;



416d on the top is a mates.
M27 IAR on the bottom is mine:-)

And then this little thing arrived today as well;

Growler!!!

Originally a TM M14 Match, found it really uncomfortable to skirmish with. Tried it with a Kart EBR body and just found it too damn front heavy but cool looking.

After a search found a second hand M14E2 real wood stock on the inter webz. Skirmished it 2 weeks ago and loved it. Pistol grip made it so much more usable.

T4RGET

Finally got this thing finished took me about a year now I'd say and waaay more money and heart ache than i wanted
Just need to put in the fake pins on the receiver with some glue and get a lipo and we're away.

Externals are
Noveske Madbull receiver and
10" rails
should have a magpul ACS stock on it, just noticed it has a VLTOR one on it
magpul MBUS sights

Internals:
SHS hi torque motor
Ultimate gearbox and internals
Raptor mosfet
SHS 13:1 gear set
standard 6:04 G&G barrel
G&G green and Madbul nub

Comes in at about 280-300 so need to get that double checked. Don't mind low readings but i want them consistent.


20140309_101018[1]


20140309_101109[1]

Darth Phoenix

The first aeg I ever tried to experiment engraving and making it OTT.
A project I abandoned and is well and truly 3 + years old. It was covered in a horrible camo and the f%*ker put a jg gearbox into it but thats the past.

First gun I tried crazy stuff too, 22.2 lipo , no thats not a type, first gun to melt the wiring literally in the R&D stage, first to blow not fry and i really do mean blow mosfets because I wanted to see one sizzle, first aeg when i shattered the hop chamber, no exageration and cracked the ver 3 shell to see it happen and to make a motor smoke like a burn out and then seize .

This was indeed a enjoyable experiment to which i needed to finish before I give up building guns thank god :cool:.

It's running sweet now but nothing too overkill.

The theme of the gun at the time is " futuristic, pisstake, intimidating, overkill " aeg , If you ask why....well why not like.

I just thought hmmm what if you mixed Rambo, predator, terminator and a boring looking g36 variant in a blender and see what happens.

Simply because I don't care and I can

I had a predator tri laser mounted onto it but i gave that a friend of mine who will make better use of it than me.

Word of thanks goes to ShadowFox and The Joker for their help on this









Weirdly fitting as I hope to not start any more projects and finish off the one's I have started and be done with them.



Cheers for looking.

DP

brenak47

My King Arms Sig 556 dmr project.Gearbox rebuilt/rewired.Custom silencer and stock by myself.Stock wrapped in paracord.

MajorMax

My collection so far (don't tell the wife)
A&K Masada
G&G GR4 G26 (extended barrel)
Hwasan mad max shotgun
KWC centennial M1911A1
Dan Wesson 6 inch barrel

Eoghan S

Finally got a TM G17! I've been after one for a while, even if it's going to shoot another hole in my funds :pac:



I have a Guarder slide on it, with some lovely trades, but I plan on replacing it anyway, it's too mainstream for me
Also have a high flow valve and stronger recoil spring to increase the kick with the metal slide, again I'll be replacing them!



I'll get better photos once my modding is over

DeBurca

I like AUGs cant help it but the thing that annoys me most about them is the front grip and I dont like vertical grips on any of my AEGs and worst of all the grip on the AUG is flimsy and wobbles about way to much
So I decided to do something about it and removed it and just held it slightly forward of the main grip/trigger it works for me and I am very happy
But then I thought if maybe there are others who like vertical grips but dislike the wobbly ones on the AUG

So below is my many solutions to both the grip and the overall look and there are a few variations that some may either like or hate

The standard Military AUG that some love and others hate


So the first version was to fit and under barrel rail to mount a Grip-bipod and use a H-bar flashider


Not bad so next was to fit a Scar flashider with removable silencer


I also like the civilian rail but prefer the Military colored body so on went an A2 receiver + the barrel with the rail + M4 style grip and a Laser/light combo and a A3 type flashider


So how would it look with a silencer I figured it would look to long so I came up with this arangement I have also fitted a small rail to the body and mounted the Laser/light combo there


Last but by no means least something short for CQB, rail also fitted to other side of recceiver to mount what ever takes your fancy


The above AUG has had a full gearbox going over Metal bushings Shims Bearing spring guide M120 motor etc the whole 9 yards
It shoots at 316-319fps with the 363mm 6.03 tight bore barrel used in the CQB configuration and at 324-327fps with the 509mm 6.04 Tight bore used for all others
I had to go to a 6.04 tight bore barrel as when a 6.03 tight bore barrel was used it would shoot 327-330fps

The safety has also been modified to a Select fire 3 position Safe/Semi/Full auto for those CQB games where you can only use Semi and it takes the guessing out of just how far to pull the trigger when under pressure or when taken by surprise indoors


PS the Military A1 receiver as yet does not have a rail mounted on the side of the receiver but that will be rectified very soon

PPS as I look at the photos a thought occurred to me how would it look with a second rail mounted on top of the barrel !!!
Maybe thats for another day when I am bored and have time on my hands

brenak47

My latest project.WE Glock 27 painted od and then grip has been stippled to bring the black back through and add a bit of texture(grip).

thermo

image.jpg

I'm taking suggestions on a designation for it!!

MarkY91

my first ever airsoft gun. bought it preowned from here and im very happy with it. yet to skirmish with it. possibly this weekend

brenak47

My latest bit of messing around with a raider and a 13" silencer i had here.

Ebr sniper

My new sniper coming to a skirmish near you this summer. Put together by Carl "rooky1" with top secret upgrades ha

SuperBlu26

My lefty friendly Ares Tavor! I also added a rail on the hand guard with a foregrip and of course I have my trusty Aimpoint.

mack1984

my New TM Recoil Block II M4

bushball

1st mod I've done to any gun although it's a small one. Sanded the barrell down with cotton wire. Still deciding whether to do more with the slide or leave is as is

bushball

Decided to do a bit more. Looks better than I thought it would

shnburn

G36k
Gng cm16r8
An my m93r

thermo

Another ak hybrid
image.jpg
Looks odd but very comfortable to shoot.
300 fps & 1830 rpm on a 11.1v 20c lipo.

thermo

image.jpg

air assault

Evolution

stigmau5

Seen my kriss and taught I haven't paid you much attention lately so after buying bit for it and other bits for other RIFs I decided to dress mine up a bit.
I have a trijicon srs clone night evolution inforce weapon light. Ace1arms right hand mag release TAF official traded silencer ra tech m4 adapter for a ris rail. I've installed a even hop up and tightbore and ra tech npas. I must install my m4 stock adapter and fit a stock tube and stock. The ra tech rail was tricky to fit as I had to remove my built in weapons light to fit it and the light didn't fit back because of the shape of the ris rail adapter. I am changing front grip for some other grip and added a nsr or similar rail for the front
Also added a clone surfire x300 to my px4

shnburn

Ares Amoeba M4 CCR
Another day messing in sg airsoft forgrip silencer acog sight 2,500 round m4 mag and m203

Horse84

new addition to my hk's. I got this ksc hk45 awhile back, had been waiting on the aftermarket slide with awhile. I had a bit of a battle with customs over getting it released to me, never had any issue importing pistol slides before now.
Anyway very pleased with the pistol itself. Looks and feels great, particularly like the grip which fits very well in the hand compared to the usp tactical.

It shoots brilliantly and shows for me anyway that ksc have finally gotten their act together regards their hop up which was always inferior to marui's imho. After some cleaning and a settling in period its firing very consistently now and would put it up against any of my tm MEU's now but still not up there with a TM g17.

I fitted a shooters design slide and barrel to it and went for the titanium colour version which is coming up very green in the pics when in reality its's probably more of a grey colour. The gun in stock form comes with a metal slide but is let down by a plastic abs outer barrel which I couldn't live with. the SD set is as you would expect of very good quality and is easily enough fitted and really adds that bit of clunk and weight to the piece.

I have it pictured below with my ksc USP tactical. The 2 guns would share a lot of the same similarities. Ksc in their wisdom decided have different magazines for bot so your standard system 7 ksc usp or usp tactical magazines will not fit the hk45.
Hecklor and koch have the gun branded as very ambidextrous with a unique ambi slide release which the tactical model doesmt have but bizarrely, on the airsoft version anyway the hk45 model has a very non ambi safety which the tactical does have. I'm very ambidextrous myself so lefties beware of this before purchasing.

Overall a very good pistol which is a joy to shoot. I'd be very interested to see a side by side comparison done on this versus TM's new hk45 which was also released recently.



USP tactical and hk45 side by side both with custom SD slide and barrel sets
Note the location of safeties and slide releases on both

mack1984

Almost finished with my Recoil Block II M4



TM M4 Sopmod
Madbull 12.5" DD RIS II
VisionKing Shortdot
Element AN/PEQ 16
Magpul AFG & Rail ladders
Magpul MS3 Multicam Sling
Daniel Defense Sling Mounts
KAC Front and Rear Irons

OzCam

Before:



After:

SuperBlu26

Horse84

Just stretching her legs

Vfc Hk m27 IAR gbbr

ShetlandViking

VFC SCAR-H/Mk.17
ACM SpecterDR
FMA PEQ-15
MX3 flashlight, Tango Down Foregrip and Remote switch all made by Element
Swiss Arms Grippod
Just gotta make the damn sling fit now

shabba87

g36e

Ebr sniper

Started life as a G&G Top Tech M4
Completely upgrades internals, tremors kit, magpul externals and holo sight

J-W

https://imageshack.com/i/ipK91xoPp

https://imageshack.com/i/paiAiHgkj

https://imageshack.com/i/pbIOSxP0j

ShetlandViking

Update: got me a SCAR Bungee 2 Point Sling directly from Tactical Link, made in 'MURICA

Horse84

Been doing some work to my vfc mp5 gbb smg recently. After lying idle and not working properly I decided to get it sorted so after sorting a new loading nozzle ( still a poor design imho) and new bolt it's now firing excellently. It was looking a bit dated so I got a RAS on the front, top rail and got an extendable butt stock to replace the fixed stock and added a surefire replica
See here with the kwa hk45


Couldn't wait to get my hands on the new TM m&p and it didn't disappoint:)

bushball

very nice mp5 horse,
Heres a wee project I'm nearly finished, Classic army m15, got w/o the stock and pistol grip with some wiring needing to be done
Before

And after

C.A.A foregrip, ICS pistol grip and unknown stock, resprayed her black and threw in an ultimate hop rubber, just need to fix the motor and she'l be good to go

Horse84

Custom TM Kimber