Photos of your Airsoft equipment.(NO DISCUSSION)

ShetlandViking

My "cheap" CQB AEG. Second-hand M4, pretty much useless red PEQ laser and wobbly CTR clone stock. The gold-like colour of the flashlight makes me want to spray-paint the whole thing

mack1984

Finally dusted the block II recoil

Darth Phoenix

Salient Arms G34 RMR

Based on a Tm Glock 18c





Special thanks goes to Squad 701 for his help on the build and tweaks


DP

bushball

A family photo

Kevin Moran

Well MB010d (I think)
CYMA SVD-S
Silverback PP-19 (my favourite, Sean from Redbarn and Strikearms went over this after a botched downgrade, it shoots so sweet now)
CYMA AK Aims with a RPK banana clip


SRC T-33
CYMA Glock AEP (stuck a lipo in this, great performance afterwards, trigger response much much better)

mack1984

Thought I would give this hydro dipping ago and decided to do the lower frame of my Army G17 in ATACS as a test before I do my WE g17 gen4. Dont think it turned out to bad

1. Priming



2. base coating




3. Dipping film



4. Drying after dip




5. Finished article

ronan keane

Haven't posted in this thread in a while so here is the group photo!


A&K M249- Needs work down, very low fps


Custom M4- Tan Magpul stock and handguard, Black Magpul pistol grip,Magpul lower receiver, Noveske amplifier, UltraFire flashlight and a M203 Launcher (G&P I believe)


STI Lawman M1911- Great pistol however might need a bit of a modernised Update!

G&P M16- The cream of my gun crop! lovely performing thats planned to be upgraded into a DMR

Jsmurff

My latest aquisition not sure if I should work on it or leave it as is I won't be putting a gaurder kit on it that's for sure

brenak47

Moved to the pencott greenzone so i had to repaint some guns.

Jsmurff

My WA M16 GBBR courteously of Horse84

jamesk014

This collection is starting to get out of hand i think ha but still I couldn't choose what to let go. The list just keeps getting longer
Ares m200 Intervention.
A&K M60 mrk43
Colt full metal m4.
WE Scar gbbr open bolt(soon to be tan) with vfc eglm with 97 shot grenade and eotech up top.
Socom gear meu 1911.
Socom gear 24k gold limited edition.
WE stainless M9 with trades.
WE tan meu M9.
TM desert eagle with full metal guarded kit.
Gemtac licenced suppressor.
Socom gear lanyard.

[IMG][/img]
[IMG][/img]
[IMG][/img]
[IMG][/img]
[IMG][/img]
[IMG][/img]
[IMG][/img]
[IMG][/img]

thermo

[IMG][/img]

[IMG][/img]

[IMG][/img]

[IMG][/img]
New low mount.

thermo

[IMG][/img]

[IMG][/img]

My new TM HK45 with its big brother the TM MK23 SOCOM

Horse84

New addition to the collection is this TM Colt government Mark IV series 70 fitted with the Nova 2015 S70 full metal kit. Pictures don't do this justice so please ignore my ****ty attempts at photography. All credit for this goes to a sometime boardsie who knows who he is.

Eoghan S

Hey guys, first time I've been on boards in a long while.
Unfortunately the sport got a bit stale for me, but I have high hopes that I'll get back into it some time soon!
Anyway, here's my dream build, it was a project of mine since starting airsoft a couple of years ago.
Internally it's not perfect, but eventually it'll get there.
Hopefully you can appreciate it as much as I do :cool:



















Album: http://imgur.com/a/IQjWJ#tMyCsZR

Horse84

Finally got around to converting my long barrel vfc m27 IAR gbbr into something more compact.
I can swap and change when I want to now

swiftblade

Can't remember the last time I posted something on here. I also can't remember the last time I had something as pretty as this.

LeeHarvey

My We SCAR L GBB.
Converted from closed bolt to open bolt, 6.01mm inner barrel, NPAS bolt, enhanced recoil/ROF kit, tan PEQ-16 with tape switch, EoTech 552, Magpul tab, Night Evolution weapon light system, QD AAC suppressor, and SCAR MK16/L weapon smart code labels.

LeeHarvey

My WE HK416 GBB.
Just got finished putting this back together with the new trademark receivers, I had to ream all of the pin holes, for some reason they were all under sized.
6.01mm inner barrel, enhanced recoil/ROF kit.
Soon to have EoTech 552, PEQ-16, KAC front grip, and Surefire Scout with tape switch.

Horse84

Selection of glocks
From the top down Tm g17 with pgc slide and barrel, stark arms full metal g19 and ksc full metal g26


[

Horse84

Tm m&p fitted with detonator 10-8 style kit, Readyfighter magwell and Costa style mag base with surefire x300 light.

thermo

[IMG][/img]

[IMG][/img]

The latest additions to the collection, a second TM HK 45 with a ZOXNA under barrel launcher ( pistol type) and an ARES VZ 58 long.

thermo

[IMG][/img]

I liked the first one so much I got a second one for Christmas!

Horse84

Thank god it's that time of year when you can get some decent use out of gbbr's

Sleepershark

Latest custom work conversion stock for SV98 . This is the Prototype. Its not complete or finished yet. Countless hours gone into this so far. Planning on making a run of ten after templates are sorted out

thermo

[IMG][/img]

[IMG][/img]

New "family photo" of my pistols.
TM MK 23
VFC PPQ M2
TM HK45
TM Colt Python

Drachnien

MY WE Scar given a new lease of life as a bullpup

Horse84

New addition

Only have the spring bolt for this so if anyone knows where I can get a gas bolt and mag for this I'm all ears

DeBurca

One of my latest M4 builds for my own collection
So rather then have a long and a medium length M4 I decided to go with a 2 in 1
It features a single lower receiver with a custom 9mm gearbox with all the usual mods done wired to deans
It has a G&G stock a V shaped sniper trigger guard and an ambidextrous mag release + a SPR pistol grip

I have 2 upper receivers each with there own inner barrel and hop-up unit they can be changer in a matter of seconds by simple pushing out the forward body pin and sliding off the upper receiver and sliding on the other and hay presto you are good to go

The longer receiver has a Bull style outer barrel with a 470mm long 6.03 tight bore barrel with a MaGPul set of mbus flip up sights and has a 320mm long aluminium rail system which is very light for it length

The shorter receiver has a steel 4 rail MadBull rail system which anchors the rails to the body nut and the forward barrel support, the outer barrel is polished and has a 285mm long 6.03 tight bore barrel, it has Troy flip up sights and a Rebar cutter flash hider + a forward hand stop
It has a flashlight/laser combo which would be useful for CQB

DeBurca

Following on from my previous M4 build and being very pleased with the results I decided to do the same again with another 2 in 1

As before it features a single lower receiver with a G&P 8mm gearbox which is short stroked and is wired to deans
It has a MagPul ACS stock, a KAC style curved trigger guard and an ambidextrous mag release + a G16 pistol grip

Just like my other build it have 2 upper receivers each with there own inner barrel and hop-up unit they can be changer in a matter of seconds by simple pushing out the forward body pin and sliding off the upper receiver

The longer receiver has a MRE free float rail system, I shortened the M4 length outer barrel by 22mm to bring the rear of the Diablo flash hider in under the front of the rails for a cleaner look, it has a 363mm long 6.03 tight bore barrel + a Angled Fore Grip and is topped of by a Tan high mount T1 red/green dot sight with a quick release mount

The short receiver has a 4" stubby rail with a 60mm long pistol type silencer and has a 180mm long 6.03 tight bore barrel and has a set of Tan ladder rail covers to match the Tan stock and grip

thermo

[IMG][/img]


The latest addition to the collection a TM KSG.

dazza161989

My very small (but hopefully expanding) arsenal. KWC colt 1911 100th anniversary & Steyr SSG 69 p2.

thermo

[IMG][/img]

RPG 7
SL-8
AUG A2
KSG
VZ 58 compact
Custom AK/ M4 hybrid
ASG scorpion Evo 3's X2 (one with zoxna mini launcher)
TM MK 23
TM HK 45
TM foliage warrior

Horse84

It's not often gas rifles work well in late December.

shytan

pip773

Just made this Leather/Nylon Drop Leg Holster for my Sig SP2022, Took about 8/9 hours total.

[Steve]

From right to left:

WELL VSR-10 MB03 - Swiss Arms 3-9x40 Scope + Bipod + PPS Upgraded spring & piston
WELL L96 MB01 - Swiss Arms 3-8x32 Scope + Quick-detach bipod
Double Eagle M14 AEG - Excelvan reddot sight + SpikeTactical laser + JINSE swivel bipod + ArmyForce M120 spring
BISON 701 - Upgraded spring
UHC 937S - totally stock

Sleepershark

FN Mag GPMG. Custom handmade wood stock, R-hopped tight bore inner barrel. 28-30 rps. Machining a correct flash hider.

Horse84

A bit of target practice with the VFC HK m27 IAR and my new TM m4 MWS gbbr



https://flic.kr/p/VdMQgN

LeeHarvey

My rebuilt VFC SCAR 'H'

LeeHarvey

RA-Tech/KWA/Guarder MK23 USSOCOM GBB

LeeHarvey

My TM PSG-1 rebuilt from the ground up.

Brontosaurus

VFC FNX 45

LeeHarvey

Newest acquisition, my upgraded Ares M200 Intervention.

LeeHarvey

Close up..

Brontosaurus

Updated with steel slide.

LeeHarvey

Second hand A&K MK43/M60E4 which was in fairly rough state.......
Stripped it down, stripped the old tatty non realistic silver paint off, then a Duracoat job and reassembly.....

LeeHarvey

Pictures of the Duracoat refinished A&K MK43...

LeeHarvey

Two more projects with Duracoat refinished parts....
First is my A&K M249 Para SAW.
Also a little hand painted detail with Humbrol enamel on the 200rd ammunition box....

LeeHarvey

My Cybergun FN SPR A5M. I bought this gun second hand and gave it a new lease of life with some Duracoat on the stock and barrelled action, and internal upgrades.