Photos of your Airsoft equipment.(NO DISCUSSION)

Horse84

Tm m&p fitted with detonator 10-8 style kit, Readyfighter magwell and Costa style mag base with surefire x300 light.

thermo

[IMG][/img]

[IMG][/img]

The latest additions to the collection, a second TM HK 45 with a ZOXNA under barrel launcher ( pistol type) and an ARES VZ 58 long.

thermo

[IMG][/img]

I liked the first one so much I got a second one for Christmas!

Horse84

Thank god it's that time of year when you can get some decent use out of gbbr's

Sleepershark

Latest custom work conversion stock for SV98 . This is the Prototype. Its not complete or finished yet. Countless hours gone into this so far. Planning on making a run of ten after templates are sorted out

thermo

[IMG][/img]

[IMG][/img]

New "family photo" of my pistols.
TM MK 23
VFC PPQ M2
TM HK45
TM Colt Python

Drachnien

MY WE Scar given a new lease of life as a bullpup

Horse84

New addition

Only have the spring bolt for this so if anyone knows where I can get a gas bolt and mag for this I'm all ears

DeBurca

One of my latest M4 builds for my own collection
So rather then have a long and a medium length M4 I decided to go with a 2 in 1
It features a single lower receiver with a custom 9mm gearbox with all the usual mods done wired to deans
It has a G&G stock a V shaped sniper trigger guard and an ambidextrous mag release + a SPR pistol grip

I have 2 upper receivers each with there own inner barrel and hop-up unit they can be changer in a matter of seconds by simple pushing out the forward body pin and sliding off the upper receiver and sliding on the other and hay presto you are good to go

The longer receiver has a Bull style outer barrel with a 470mm long 6.03 tight bore barrel with a MaGPul set of mbus flip up sights and has a 320mm long aluminium rail system which is very light for it length

The shorter receiver has a steel 4 rail MadBull rail system which anchors the rails to the body nut and the forward barrel support, the outer barrel is polished and has a 285mm long 6.03 tight bore barrel, it has Troy flip up sights and a Rebar cutter flash hider + a forward hand stop
It has a flashlight/laser combo which would be useful for CQB

DeBurca

Following on from my previous M4 build and being very pleased with the results I decided to do the same again with another 2 in 1

As before it features a single lower receiver with a G&P 8mm gearbox which is short stroked and is wired to deans
It has a MagPul ACS stock, a KAC style curved trigger guard and an ambidextrous mag release + a G16 pistol grip

Just like my other build it have 2 upper receivers each with there own inner barrel and hop-up unit they can be changer in a matter of seconds by simple pushing out the forward body pin and sliding off the upper receiver

The longer receiver has a MRE free float rail system, I shortened the M4 length outer barrel by 22mm to bring the rear of the Diablo flash hider in under the front of the rails for a cleaner look, it has a 363mm long 6.03 tight bore barrel + a Angled Fore Grip and is topped of by a Tan high mount T1 red/green dot sight with a quick release mount

The short receiver has a 4" stubby rail with a 60mm long pistol type silencer and has a 180mm long 6.03 tight bore barrel and has a set of Tan ladder rail covers to match the Tan stock and grip

thermo

[IMG][/img]


The latest addition to the collection a TM KSG.

dazza161989

My very small (but hopefully expanding) arsenal. KWC colt 1911 100th anniversary & Steyr SSG 69 p2.

thermo

[IMG][/img]

RPG 7
SL-8
AUG A2
KSG
VZ 58 compact
Custom AK/ M4 hybrid
ASG scorpion Evo 3's X2 (one with zoxna mini launcher)
TM MK 23
TM HK 45
TM foliage warrior

Horse84

It's not often gas rifles work well in late December.

shytan

pip773

Just made this Leather/Nylon Drop Leg Holster for my Sig SP2022, Took about 8/9 hours total.

[Steve]

From right to left:

WELL VSR-10 MB03 - Swiss Arms 3-9x40 Scope + Bipod + PPS Upgraded spring & piston
WELL L96 MB01 - Swiss Arms 3-8x32 Scope + Quick-detach bipod
Double Eagle M14 AEG - Excelvan reddot sight + SpikeTactical laser + JINSE swivel bipod + ArmyForce M120 spring
BISON 701 - Upgraded spring
UHC 937S - totally stock

Sleepershark

FN Mag GPMG. Custom handmade wood stock, R-hopped tight bore inner barrel. 28-30 rps. Machining a correct flash hider.

Horse84

A bit of target practice with the VFC HK m27 IAR and my new TM m4 MWS gbbr



https://flic.kr/p/VdMQgN

LeeHarvey

My rebuilt VFC SCAR 'H'

LeeHarvey

RA-Tech/KWA/Guarder MK23 USSOCOM GBB

LeeHarvey

My TM PSG-1 rebuilt from the ground up.

Brontosaurus

VFC FNX 45

LeeHarvey

Newest acquisition, my upgraded Ares M200 Intervention.

LeeHarvey

Close up..

Brontosaurus

Updated with steel slide.

LeeHarvey

Second hand A&K MK43/M60E4 which was in fairly rough state.......
Stripped it down, stripped the old tatty non realistic silver paint off, then a Duracoat job and reassembly.....

LeeHarvey

Pictures of the Duracoat refinished A&K MK43...

LeeHarvey

Two more projects with Duracoat refinished parts....
First is my A&K M249 Para SAW.
Also a little hand painted detail with Humbrol enamel on the 200rd ammunition box....

LeeHarvey

My Cybergun FN SPR A5M. I bought this gun second hand and gave it a new lease of life with some Duracoat on the stock and barrelled action, and internal upgrades.