New Scythe Orochi *HOLY ****!!!*

conzy

This thing looks incredible



Comes with a 500rpm 140mm fan



No sign of reviews yet but it will kick lots of ass, its like 2 ninjas

RoyalMarine

oh jesus. thats gonna weigh a ton!

size wise i think most tower's wont take it. your gonna need something pretty impressive to hold this bad boy.

conzy

its 1.1kg afaik

And who needs a bigger case? Cut a hole in the side panel yeee haw!

Khannie

Fugly IMO.

papu

wrong its beautiful

TonyM.

Which way is the fan blowing?

PogMoThoin

Has to be a great performer, but its the ugliest thing i've ever seen. What height is it? looks higher than tuniq.

conzy

The fan blows air down through the tower, its 155mm tall

RoyalMarine

ah that looks a little bigger than 155mm!
if the fan on top is 140mm then from the base by the cpu to the top of the fan must be at least 180 - 190mm

conzy

the fan is probably 30mm so yup :P

My Lian Li PC7 plus is 210mm wide, So it would just about fit, I would need to cut a 140mm duct in the side panel though...

Anti

Its a seriously ****ing ugly thing, but id like to see some tests on it first. And i dont like the way it will blow warm air back onto the board, NB and ram. Inverting the fan would make it useless.... Hmm... Dunno about this one.

TerrorFirmer

Ugly as sin...

L31mr0d

i will be ignoring this one until I see benchs. I remember getting hyped about the CM Gemini II and TR IFX-14 only to be dissapointed.

conzy

I think they have already hit the peak of aircooling with this lots of fins on lots of heatpipes design...

I mean the TR IFX-14 is almost two TR Ultra-120 Extremes and it only shaves another 3-4 degrees off....

RoyalMarine

i like this of putting 3 x 140mm fans on it




120 x 194 x 155mm



i wonder if a mobo could handle it properly? its over 1.1kg!

papu

pwnage TBH

Anti

3 fans would be counter productive. I think that just demonsstrates how the fan can be mounted in different posisitions.

po0k

The fins are too far apart.
Should be half the size, double the number of fins and made out of copper.

TonyM.

conzymaher wrote: »

I think they have already hit the peak of aircooling with this lots of fins on lots of heatpipes design...

I mean the TR IFX-14 is almost two TR Ultra-120 Extremes and it only shaves another 3-4 degrees off....

My next cooler is the Freezone Elite trying to source it at the moment .

L31mr0d

TonyM. wrote: »

My next cooler is the Freezone Elite trying to source it at the moment .

let us know where you find it. I've been hearing good things about this cooler.

Kinetic^

LOL!!! Seriously, you'd need a case extension for that thing!!! :rolleyes:

311

po0k wrote: »

The fins are too far apart.
Should be half the size, double the number of fins and made out of copper.

I think what they are aiming for is that the fins have a higher conduction rate ,than copper and the fins actually suck the heat from the copper.

The architecture of this beast is similar to a graphics card i got lately and the card is excellent at keeping cool.

requiem1

tested across on extremesystems linky

guy has an intel 8400 clocked from 3 to 4ghz with 1.5v and is getting 42-44 idle and 70 on load which is kinda high but apparently the fan is slow spinning and more importantly silent:D

sebastianlieken

holy cr@p that thing is hideous!

Its takin over the entire top part of the pc ffs! grand if u jus want a quite pc in a case with no window so ya dnt have ta look at the bloomin thing. but jesus, that cooler jus ruins the aesthetics of the inside of a 'puter. yikes!

zilog_jones

Surely motherboards aren't designed to take that kind of weight? Wouldn't it make sense to have some sort of brackets or supports off the bottom or sides of the case?

Capt'n Midnight

how much would it weigh if it was copper !

papu

:eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek::eek:

311

Why dont they just build a heatsink that is also the case.
Or at least support the motherboard from the heatsink

Capt'n Midnight

311 wrote: »

Why dont they just build a heatsink that is also the case.
Or at least support the motherboard from the heatsink

Oh yeah a case made of 5mm thick aluminum or copper as the place to conduct heat to

would really love a laptop with solid aluminum base

conzy

lol?

Also, heatsink case:




*edit*

Gotta love Thermalright

papu

sweeet

Capt'n Midnight

looks like an art deco vision of the city of tomorrow
lovely

RoyalMarine

nicest looking setup ive seen in a long time.

The Real B-man

:eek: Motherboard goes snap!

Chosen

lol

conzy

?! Is that some sort of Industrial Blower?

Chosen

conzymaher wrote: »

?! Is that some sort of Industrial Blower?

http://www.frostytech.com/articleview.cfm?articleID=2259