Help finding xbox 360 serial

thenightrider

Hi im going to flash a 360 with a benQ drive in it

Only thing is the xbox has had the dvd drive and motherboard changed in it and i dont no what the serial number is as it is not on the motherboard at all

Is there any way for me to find it or flash it without the serial ???

Thanks

Helix

you dont need the serial number to flash a drive

thenightrider

im useing ipeep just at the part were you put in fben then your serial number is it ok to make up a serial uumber as long as it is is 7 digits followed by 5 digits

witnessmenow

load up your usb key like normal,

type

cd tools

then type

dosflash

follow the on-screen instructions about turning off and on the xbox.

enter the number of the drive (for example mine was number 4)

enter "r" for reading your drive.

enter the name of your firmware (call it "backup.bin" or something)

now enter

firmtool backup.bin C:\CFW\ben-cfw.bin

NOTE: the name of the benq firmware might be wrong, if the above line doesn't run correctly check the name by:

cd C:\CFW
dir

remember its name then type

C:\tools

to get back to where you were and do the firmtool line again

the firmtool line will overwrite the ben-cfw.bin with the one you want.

Repeat the top steps (the dosflash ones) except put in "w" for write instead .

When it asks for the adress of the firmware type:

C:\CFW\ben-cfw.bin

When its finished that it should be done.

Let me know if you need more instructions

ROC1977

just use the serial on the back of the 360 chassi no?