[MERGED] Your Main PC - Pictures, specs and discussion <IMAGE HEAVY>

..Brian..

my new Asrock z77 extreme 4 mobo recommends RAM in slot 1 + 3 anyway

sosmyface

You're right White_Wolf.
When i was installing the RAM I initially thought I was to match it to the colours but whatever way I was reading the manual I had them the wrong way.

Channel A DIMM_A1 and DIMM_A2
Channel B DIMM_B1 and DIMM_B2

I put it in A1 and A2 thinking it was the same channel.

But it recommends to use DIMM_A2 and DIMM_B2 (blue slots) for Two Dimms.

I checked the bios after and everything looks good. Tiny bit of dust on the bottom of the case when i opened it but not on the board etc.

Cheers

@dwighet, probably empty. I dont know where all my manly cups were when i took that photo:(

Telchak

My Hackintosh Setup by CraigFay, on Flickr

My obsessive compulsive Hackintosh setup. Almost everything on the desk is blu-tacked into place

Eboggles

Is it just me or is that monitor a bit bent? Looks like it's leaning over to the right.

Skylinehead

Ever so slightly, now that you mention it

downwithpeace

Wall-e has nicked Telchak's ram.

deceit

Eboggles wrote: »

Is it just me or is that monitor a bit bent? Looks like it's leaning over to the right.

I would say its a swivel monitor thats just not fully pushed down into place

tylercollins

@Telchak great looking setup you have there! So clean! I'm hoping to have something clean looking as well like that, currently in the process of redoing my home office, fingers crossed finished this week

hellboy99

My CM Storm Trooper tower arrived yesterday, best case ever!!!









It's not finished yet, new MB and another GTX560Ti in the next few weeks :pac:

Monotype

Looks monstrous. The motherboard is so small in comparison!

hellboy99

Monotype wrote: »

Looks monstrous. The motherboard is so small in comparison!

It's big alright, barely fits on my desk and it weighs a tonne.

ED E

Bloody WANT. That or a 932.

Skylinehead

ED E wrote: »

Bloody WANT. That or a 932.

The Storm Stryker is even huger. Lovely case, but I'd still probably take a 600T over it.

ShadowHearth

well thats a HUGE E-penis you got there bud! love that case!

Tea_Bag

I'm ordering the stryker on Monday

it was that or the white 600T I was changing to, but I settled on the stryker cause its that little bit better to water cool and I could use a change from my black 600T.

can I ask a question that I'm not getting a clear answer on in the overclockers club, if you remove the toolbox, is there anything limiting the thickness of a 240mm rad you can fit on the floor?

hellboy99

ShadowHearth wrote: »

well thats a HUGE E-penis you got there bud! love that case!

Have to make up for it somewhere lol

hellboy99

Tea_Bag wrote: »

can I ask a question that I'm not getting a clear answer on in the overclockers club, if you remove the toolbox, is there anything limiting the thickness of a 240mm rad you can fit on the floor?

Depends on the height, you'd have to get a slim one.

The Omen 666

Just about to start to assemble my new build. Thanks to all who helped and advised. Its taken me a while to finally get the pieces but its here and the fun begins

FlyingIrishMan

hellboy99 wrote: »

My CM Storm Trooper tower arrived yesterday, best case ever!!!

:

I'm not sure whether to just go ahead and buy the black one or wait for the white one. I like the white one more but I don't know how long more it will be.

uncle_sam_ie

FlyingIrishMan wrote: »

I'm not sure whether to just go ahead and buy the black one or wait for the white one. I like the white one more but I don't know how long more it will be.

Wait for the white case.:D

White_Wolf

FlyingIrishMan wrote: »

I'm not sure whether to just go ahead and buy the black one or wait for the white one. I like the white one more but I don't know how long more it will be.

You should get the Corsair 600T White, such an awesome case, I want one myself.

FlyingIrishMan

Tea_Bag wrote: »

I'm ordering the stryker on Monday

it was that or the white 600T I was changing to, but I settled on the stryker cause its that little bit better to water cool and I could use a change from my black 600T.

can I ask a question that I'm not getting a clear answer on in the overclockers club, if you remove the toolbox, is there anything limiting the thickness of a 240mm rad you can fit on the floor?

Damn!! I didn't know the stryker was already available to buy, I thought it would be a few months seeing as it was only announced 19th June. I'll be ordering that soon so

thewheel2.0

The Omen 666 wrote: »

Just about to start to assemble my new build. Thanks to all who helped and advised. Its taken me a while to finally get the pieces but its here and the fun begins

Oh god the Shinobi is so good looking. Just sent my payment of to Hardwareversand today, cant wait for mine to come!

The Omen 666

thewheel2.0 wrote: »

Oh god the Shinobi is so good looking. Just sent my payment of to Hardwareversand, today cant wait for mine to come!

i was really surprised...its pretty sweet

The Omen 666

a satisfying sight!! cable could be a bit better managed but shot power cables on the beQuiet and not sure i can place the 6pins any better

now for the software... hopefully a bit of gaming tomorrow...

building didnt take a long as i thought really...im actually a bit disappointed

hellboy99

FlyingIrishMan wrote: »

I'm not sure whether to just go ahead and buy the black one or wait for the white one. I like the white one more but I don't know how long more it will be.

The white one is nice, would of got the white one myself only for the colour scheme in my room.

..Brian..

So I got my hands on some 3M Di-Noc Carbon Fibre film the other day. Decided to take the trim off my case and cover it, subtle mod but looks wicked I think!

Stock:



Modded:

Serephucus

I've never been much for that case, and I'm probably only a little more than so-so on carbon fibre, but that's one hell of a job. Very nicely done indeed.

The Omen 666

Nicely Done

..Brian..

Thanks guys, delighted with the outcome

Have some left over so thinking some highlights inside the case. Want to get some sleeved cables and lighting in there first tho to see how it looks.