Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
Random Photo Part IX DO NOT QUOTE PHOTOS & < 800px PLEASE!
Comments
-
-
-
Just to continue the reflections theme from the previous page.
http://www.flickr.com/photos/clickyfish/3266025273/0 -
-
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
-
Taking a picture of a camera? That's like typing "google" into Google
Oh, it's ok, the 'blad is broken down anyways - I'm not going to create any mad Large-Hadron-Collider-style effects over Inchicore any time soon :pac:
The internals of the camera, featuring the offending screw that I just can't get to turn...0 -
-
No, the shots are just to distract me for another 12 hours until I get (another) smaller screwdriver that might pop open a screw to the left of the one in focus :mad:
It's (probably speaking too soon) a relatively simple operation inside there if all is going well, the main guts are just covered up with a small plate, and it's possible to work away from there. Unfortunately, it's 'hard jammed' as opposed to 'soft jammed' - Which would be a lot... LOT... easier to fix!
Objects of desire sounds good
0 -
Advertisement
-
...can you even attempt to oil it ? or use a small vice-grips ?Unfortunately, it's 'hard jammed'
Anyways, I'm the firestarter !
( I was putting a 'little' petrol into a biscuit-tin and firing it at the base of the fire, mad effect, BUT HIGHLY dangerous !:eek: )
0 -
Morrisseeee wrote: »...can you even attempt to oil it ? or use a small vice-grips ?
Gotta keep all lubes outta there, it's right beside the glass element on the lens that's jammed on to it, and I wouldn't like to get anything mucky around there!
The head's also about 4/5mm wide, and up against a division (along with being 2 inches into the body), so vice grips are out too...
Ah I'll get there! 0 -
-
Gotta keep all lubes outta there, it's right beside the glass element on the lens that's jammed on to it, and I wouldn't like to get anything mucky around there!
The head's also about 4/5mm wide, and up against a division (along with being 2 inches into the body), so vice grips are out too...
Ah I'll get there!
If it's not going to disturb anything else, you could alway try 'freezing' the screw with a can of air. Just make sure it's clean air, not lubricated. You should pick some up in Maplins. Just spray onto the head through an extention tube. It may be enough to contract it veeeeery slightly and loosen it.
Or a very careful flamethrower for the opposite effect:eek::pac:0 -
-
-
Advertisement
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
-
-
-
-
-
Advertisement
-
-
-
-
-
-
-
-
-
-
Advertisement
-
This discussion has been closed.
Advertisement