www.toysoldiersairsoft.com

TEKNO@TSA

Psssst - (you should have your goggles down when playing airsoft) :P

Will indeed.

Edit: want it ordered in if i can get it?

TEKNO@TSA

Mechanix Gloves, as used by US Military / SEALs etc now in stock
Now in Stock

http://www.tsairsoft.com/mechanix-tactical-c-90_286.html

hoplite

Aready have two pairs of original and they are great. Might get a pair of the m-pacts off ya.

TEKNO@TSA

TSA Will be at Red Hammer II - Balkan Thunder @ Predator combat games Friday July 31st - Sunday August 2nd 2009

..........well if i can get the stuff down that is.

Probably have a selection of spare mags, CHARGED batteries, various Russian / NATO themed stuff, possibly some Ruskie Gear, glasses, slings etc if ya's want anything else just put it here, and ill endevour to bring with

Thanks

Phil

gerrowadat

TEKNO@TSA wrote: »

TSA Will be at Red Hammer II - Balkan Thunder @ Predator combat games Friday July 31st - Sunday August 2nd 2009

..........well if i can get the stuff down that is.

Probably have a selection of spare mags, CHARGED batteries, various Russian / NATO themed stuff, possibly some Ruskie Gear, glasses, slings etc if ya's want anything else just put it here, and ill endevour to bring with

Thanks

Phil

Nice one. Fancy bringing down some of the Mechanix m-pact gloves in Coyote. Not sure if I'm an L or XL...

TEKNO@TSA

no probs - i have a wee stand for them so there easy to transport - ill have oakley SI assault gloves as well in next week

TEKNO@TSA

"Bargain bucket" Added - for all those end of line, One off's etc etc

http://www.tsairsoft.com/bargain-bucket-c-95.html?osCsid=9b48585ad778fec39f774d423170e022

TEKNO@TSA

Evilrobotshane

PM me on monday to remind me to check - if its in stock ill have it in a few days


(how come the post doens't show - yet i get a PM telling me what you wrote!!?? weirdness)

evilrobotshane

TEKNO@TSA wrote: »

Evilrobotshane

PM me on monday to remind me to check - if its in stock ill have it in a few days


(how come the post doens't show - yet i get a PM telling me what you wrote!!?? weirdness)

Sorry, I deleted it shortly thereafter because I decided just to grab the Arktis chest rig in the extremely-good-value section - and a few other bits while I was at it. Going the MOLLE route just seems like too much effort in retrospect.

TEKNO@TSA

Oakley Factory Pilot Gloves now in Stock

http://www.tsairsoft.com/oakley-c-90_145.html

Mervenut

Hi Phil,
Any chance you can get me a couple of pairs each of Tru-Spec, Tactical Response Uniform Neoprene Elbow and Knee Pad inserts?
Thanks,
Mervenut

TEKNO@TSA

Mervenut wrote: »

Hi Phil,
Any chance you can get me a couple of pairs each of Tru-Spec, Tactical Response Uniform Neoprene Elbow and Knee Pad inserts?
Thanks,
Mervenut

Will check tomorrow. As an alternative (if i cant get the tru spec ones in a reasonable time) i can offer the 5.11 knee and elbow pads. Have the knee pads in stock atm, ill check them for size in tru spec trousers tomorrow.

Phil

TEKNO@TSA

Allo Folks.

As mentioned a few posts above - i'll be attending RHII: BAlkan Thunder @ Predator Combat games at the end of the month.

Paul AKA: "Snakedoctor" from the Airsoft Ireland Forums is selling allot of UK Special Forces kit in aid of a Charity to help send the Child of an Army Nurse to Australia for cancer treatment.

He has some great kit up for grabs.

10% of all sales @ TSA over the weekend @ RHII will be going directly to the Charity.

Below is the link for those who want to check out whats for sale - all for a good cause.

http://www.airsoftireland.com/forums/index.php?showtopic=16243

Thanks

Phil

tudenham10

Hi Phil,

the 416 arrived yesterday, she's a beauty!
Many thanks for the excellent service!

Gerry

TEKNO@TSA

Ahhh good stuff - have fun with it - and if your @ RHII - don't be shooting me with it ;P

Mervenut

Will check tomorrow. As an alternative (if i cant get the tru spec ones in a reasonable time) i can offer the 5.11 knee and elbow pads. Have the knee pads in stock atm, ill check them for size in tru spec trousers tomorrow.

thanks Phil, if they will fit the 5.11s will do the trick!

mle1324

ohhhh that SAS kit is so tempting but only that i doing a nam load out i can't.:pac:

TEKNO@TSA

Mervenut wrote: »

thanks Phil, if they will fit the 5.11s will do the trick!

The 5.11's pads DON'T fit in the trousers with out a bit of modification to the pad, ie: gotta cut it, so that its not as broad - easy to do as its only foam.

Still waiting to hear back on the Tru-Spec stuff - was supposed to arrive end of last week - but hasn't yet.

Phil

Mervenut

OK, I'll hang on for a day or two until you get news on the tru-spec stuff and take it from there. Thanks for tryin'!

fasterkayote_

TEKNO@TSA wrote: »

Fasterkayote:

My Apologies - for the Ubber delay - pics as promised


whole package

Little bit of wear on the cheek piece.

Sorry for the long response, a bit priced as a 2nd hand but if he removes the cylinder,magazines and battery how much would it be?

Many Thanks......

gerrowadat

You still doing tru-spec? Any chance you could get in a tru-spec multicam boonie hat for me?

mafiaboy

hi bro im looking for a silencer adaptor to fit my stuby it is a clookwise tread and i have a anticlookwise silencer is there some thing that can help me to meet the two of them halfway
thanks denis

TEKNO@TSA

Fasterkayote: I'll ask and find out.

gerrowadat: There should be a shipment of tru-spec landing anytime soon - i'll check what i can get.

Mafiaboy: there are +/- convertors - alternativley i have silencers that are both +/- ends on them £20.



Shall be here tomorrow: all made by 'Vanaras'

Prices as follows - will be online tomorrow:

6mm BB loader - clear / smoke - £6.50 (pistol style)
G36 100 Rnd Mid Caps - £8
40mm 36 Rnd Gas Grenade - £24
40mm 54 Rnd grenade - £24
PEQ-15 Laser Aimer (Dummy Black) - £25
PEQ-15 Laser Aimer (Dummy Sand) - £25
650nm 5mw Red laser module - £12
532nm 5mw Green Laser Module - £16
11.1v Li-Po Battery Pack for PEQ-15 - £20
7.4v li-Po Battery Pack for PEQ-15 - £15
11.1v Li-Po WITH PEQ-15 (Black / Sand) - £35
7.4v Li-Po WITH PEQ-15 (Black / Sand) - £32

6.03 mm Barrels:

110mm - Mp5K - £10.50
141mm - Mp5PDW - £10.50
229mm - MP5A4, A5, SD5, SD6, AK-beta - £12
247mm - G36C, P90C CAR15, SG552 - £12
300mm - M733, MC51+, Thompson - £12
363mm - M4A1, SR16, SG551, M4 S-System, M249 para - £15
430mm - PPS10, Type 89, M14 compatible - £16.50
455mm - AK47, AK47S, AK74 - £16.50
460mm - AK74MN - £16.50
493mm - G36 - £17
500mm - M14 - £17
509mm - M16A1, A2, VN, AUG, M249 MK I/II, M14 compatible - £17
550mm - M16A1+, A2+, VN+, AUG+ , M14 compatible - £17.50

TEKNO@TSA

New Bulle US Woodland camo now in stock + OD shemaghs back in stock
http://www.tsairsoft.com/clothing-c-90_104_248.html

Chicom chest rigs + Urban Assault Vests back in stock
http://www.tsairsoft.com/chest-rigs-c-90_104_249.html

Drop Leg holsters Back in stock
http://www.tsairsoft.com/holsters-c-90_104_251.html

Parcel force messed up the vanaras order, promised delivery tomorrow Friday 17th

Mervenut

The 5.11's pads DON'T fit in the trousers with out a bit of modification to the pad, ie: gotta cut it, so that its not as broad - easy to do as its only foam.

Still waiting to hear back on the Tru-Spec stuff - was supposed to arrive end of last week - but hasn't yet.

Phil

Any sign yet of the Tru-Spec knee/elbow pad inserts?
Thanks,
M

TEKNO@TSA

No mate sorry - still hasn't even arrived in the UK - so am currently loosing the will to live with Tru-Spec

Looks like i won't be gerting any more of it any time soon unfortunatly

Am not to happy.

moggser

[

6.03 mm Barrels:

110mm - Mp5K - £10.50
141mm - Mp5PDW - £10.50
229mm - MP5A4, A5, SD5, SD6, AK-beta - £12
247mm - G36C, P90C CAR15, SG552 - £12
300mm - M733, MC51+, Thompson - £12
363mm - M4A1, SR16, SG551, M4 S-System, M249 para - £15
430mm - PPS10, Type 89, M14 compatible - £16.50
455mm - AK47, AK47S, AK74 - £16.50
460mm - AK74MN - £16.50
493mm - G36 - £17
500mm - M14 - £17
509mm - M16A1, A2, VN, AUG, M249 MK I/II, M14 compatible - £17
550mm - M16A1+, A2+, VN+, AUG+ , M14 compatible - £17.50[/quote]



are these barrels tight bore or just the bog standard ones?

TEKNO@TSA

6.03mm barrels are tightbore

moggser

seems there aint no foolin you :)

have one that will fit this

http://shop.ehobbyasia.com/aeg/d-boy/d-boys-m4-ras-ii-full-metal-aeg-5781m.html

TEKNO@TSA

moggser wrote: »

seems there aint no foolin you :)

have one that will fit this

http://shop.ehobbyasia.com/aeg/d-boy/d-boys-m4-ras-ii-full-metal-aeg-5781m.html

yep

363mm - M4A1, SR16, SG551, M4 S-System, M249 para - £15