www.HobbyAirsoft.ie (dublin)

Inari

I Armour I wrote: »

Cheers, also to clarify (if required) according to some suppliers it comes with a storage case as a box? Even more interest peaked :-)

Out of stock with them & Redwolf unfortunately

shytan

ricka wrote: »

Arriving Next Monday:

The MG42

price PLEASE

ricka

shytan wrote: »

price PLEASE

Hi mate, I'll have a price Monday morning

Haribo1358

Hi lads what charger would you recommend for a 7.4 lipo? thanks and do you have any in stock?

thermo

Do ye have any low profile scope rings to fit a scope with a 25mm tube, also looking for a blue shs 15 tooth piston.

ricka

shytan wrote: »

price PLEASE

Hi mate, €750

ricka

Haribo1358 wrote: »

Hi lads what charger would you recommend for a 7.4 lipo? thanks and do you have any in stock?

Ideally this below, however we do have a cheaper balance charger for €29

http://www.hobbyairsoft.ie/index.php?route=product/product&path=37_58&product_id=463

thermo wrote: »

Do ye have any low profile scope rings to fit a scope with a 25mm tube, also looking for a blue shs 15 tooth piston.

No to both Lar.We're still waiting on the SHS pistons

robust

hey, thanks for those bits today.
that MG42 is the dog b****xs.
Whats next, One of these maybe?

shytan

Just a long shot here but would there be a busted SIG 552-553- 550 about looking for the folding stock.thanks

ricka

shytan wrote: »

Just a long shot here but would there be a busted SIG 552-553- 550 about looking for the folding stock.thanks

I think there's one there but it has a broken stock

shytan

ricka wrote: »

I think there's one there but it has a broken stock

I'll try to get in tomorrow or Friday it may have the part I need.Thanks

goodlad

Hey Lads.

Any eta on the shs pistons?

ricka

goodlad wrote: »

Hey Lads.

Any eta on the shs pistons?

Hi Gary, we've managed to make contact with our suppliers earlier this week.They said they were now working on our order.Looks like another 2 weeks

goodlad

ricka wrote: »

Hi Gary, we've managed to make contact with our suppliers earlier this week.They said they were now working on our order.Looks like another 2 weeks

Cool, cheers for the update man.
I will take it easy on the trigger finger until then and try not strip the lonex piston im using, haha.

Ebr sniper

Hi guys
Just wondering by any chance would you be able to get a full set of a&k receiver screws and pins for a masada as all in my masada need changing. Thanks

ricka

Ebr sniper wrote: »

Hi guys
Just wondering by any chance would you be able to get a full set of a&k receiver screws and pins for a masada as all in my masada need changing. Thanks

Any chance you could bring it in and Robbie will try and sort it for you.We have mountains of screws!

Ebr sniper

ricka wrote: »

Any chance you could bring it in and Robbie will try and sort it for you.We have mountains of screws!

Yea no problem I'll try and call in next week. Have you any v2 front wired greaboxes in stock as I'm looking for a good drop in gearbox for it. Thanks

airwolf08

Hi guys can you tell me how to get to shop on cork from limerick

Hande hoche!

Hey lads, any chance you can order in King arms accessories? A scope mount and a couple of magazines. Thanks.

Inari

Ebr sniper wrote: »

Yea no problem I'll try and call in next week. Have you any v2 front wired greaboxes in stock as I'm looking for a good drop in gearbox for it. Thanks

We've only got rear wired gearboxes in stock at the moment unfortunately, sorry!

Hande hoche! wrote: »

Hey lads, any chance you can order in King arms accessories? A scope mount and a couple of magazines. Thanks.

Could you link us to the specifics and I'll check out availability with our suppliers

airwolf08 wrote: »

Hi guys can you tell me how to get to shop on cork from limerick

I'm pretty useless for you there - only know the Dublin store. It's in the Kinsale Road Business Park, near the Harvey Norman.

This should help
https://maps.google.com/maps?saddr=Limerick,+Ireland&daddr=Kinsale+Road+Roundabout,+Cork,+Ireland&hl=en&ll=51.874689,-8.461833&spn=0.013115,0.038023&sll=52.991644,-7.877197&sspn=1.636701,4.866943&geocode=FXSmIwMdH098_ykTUVQfYVxbSDEwczGXqccACg%3BFbSGFwMdS79-_ymvWfos749ESDFTapEXcsS7Yw&oq=kinsale+road+roun&t=h&mra=ls&z=15

If you're at all unclear give the lads in Cork a ring on 021 425 0100

Hande hoche!

Bit of a blonde moment. This scope mount http://www.kingarms.com/productpage.asp?prodid=785 and about four of these mags http://www.kingarms.com/productpage.asp?prodid=742 Cheers.

Inari

Hande hoche! wrote: »

Bit of a blonde moment. This scope mount http://www.kingarms.com/productpage.asp?prodid=785 and about four of these mags http://www.kingarms.com/productpage.asp?prodid=742 Cheers.

Scope mount is a no-go unfortunately, but I do have the mags in stock They're €18 each

Hande hoche!

Perfect, will try and make it in during the week. Thanks.

goodlad

Hey lads. Do you have have a dremel handy that i could use for 2 mins?
I need to mod a swordfish kit for my mp5. Just need to whip off a tiny bit of aluminium for it to fit.

ricka

goodlad wrote: »

Hey lads. Do you have have a dremel handy that i could use for 2 mins?
I need to mod a swordfish kit for my mp5. Just need to whip off a tiny bit of aluminium for it to fit.

Dremel eh!, they couldn't possibly be in any airsoft retailers shop Gary!
We may have one you can use...drop in

goodlad

ricka wrote: »

Dremel eh!, they couldn't possibly be in any airsoft retailers shop Gary!
We may have one you can use...drop in

I was in today and use it. I may of also abused it a bit... Oops! I'm currently using a power drill in place of a dremel... Haha

Damo 2k9

Howya lads, have yous any flecktarn boonies in stock?? Need one for bellurgan on sunday, and one of the lads is heading out on friday so he can grab it. Cheers.

Tony2589

Hey how's it going , I picked up a vfc scar-l the other day , and it's only feeding the first bb !! I was wondering what could be the problem, I already changed out the hop rubber , and a stuck in a a hop unit from a vfc scar h and it's still doing the same , any help would be appriciated !!

ricka

Damo 2k9 wrote: »

Howya lads, have yous any flecktarn boonies in stock?? Need one for bellurgan on sunday, and one of the lads is heading out on friday so he can grab it. Cheers.

No sorry mate only Marpat,Multicam and Woodland

Tony2589 wrote: »

Hey how's it going , I picked up a vfc scar-l the other day , and it's only feeding the first bb !! I was wondering what could be the problem, I already changed out the hop rubber , and a stuck in a a hop unit from a vfc scar h and it's still doing the same , any help would be appriciated !!

Hi Tony, any chance you could drop it in

goodlad

Hey Lads,

Any sign of my Evil gun back yet?

Damo 2k9

That's grand ill grab one of them, how much are they?

Cheers

Tony2589

ricka wrote: »

No sorry mate only Marpat,Multicam and Woodland



Hi Tony, any chance you could drop it in

Will do thanks , will try to get it dropped up at the weekend !!

Inari

Aaannnnd some more lovely tantalising bits from Inokatsu

shytan

Hello lads
Just need prices for mid caps for M4, AK, MP5 and sig 552 please
Thanks

ricka

shytan wrote: »

Hello lads
Just need prices for mid caps for M4, AK, MP5 and sig 552 please
Thanks

Sorry missed you there.i'll check in the morning

shytan

ricka wrote: »

Sorry missed you there.i'll check in the morning

Any joy?

ricka

shytan wrote: »

Hello lads
Just need prices for mid caps for M4, AK, MP5 and sig 552 please
Thanks

Hi Mate, We have G&G M4 mids, G&P and King Arms AK mids.No MP5 or SIg mids at the moment

WaldeT

Hi,

Can you get these in?

http://shop.ehobbyasia.com/magazines/magpul-pts-50rd-green-label-pmag-for-m4-m16-dark-earth-10pcs.html#.UysiuqXxB0s

Thanks
Tony

Tony2589

Hi , have ye gotten a chance to have a look at the vfc scar I dropped up on Sunday ?

Inari

WaldeT wrote: »

Hi,

Can you get these in?

http://shop.ehobbyasia.com/magazines/magpul-pts-50rd-green-label-pmag-for-m4-m16-dark-earth-10pcs.html#.UysiuqXxB0s

Thanks
Tony

Just got word back from our suppliers - bad news I'm afraid

Tony2589 wrote: »

Hi , have ye gotten a chance to have a look at the vfc scar I dropped up on Sunday ?

Not yet - got a large delivery in on Wednesday that our Tech's been up to his eyes with. He'll hopefully get to all the repairs and services this week!

Tony2589

Inari wrote: »

Just got word back from our suppliers - bad news I'm afraid


Not yet - got a large delivery in on Wednesday that our Tech's been up to his eyes with. He'll hopefully get to all the repairs and services this week!

No bother at all , thanks for the reply

Tony2589

Do ye have any of these rails in stock ? http://shop.ehobbyasia.com/madbull-troy-trx-battlerail-7-inch-with-3pcs-qd-rail.html#.UzMZWpIgGK0

Mini Dude

If you could get these in how much?
http://shop.ehobbyasia.com/bf-pdw-hand-stop-w-qd-sling-swivel.html#.UzNBkYVoq-U
http://shop.ehobbyasia.com/5ku-kac-qd-silencer-14mm-ccw.html#.UzNCboVoq-U
and a vfc 8' and 10' pdw please and thanks

Inari

Tony2589 wrote: »

Do ye have any of these rails in stock ? http://shop.ehobbyasia.com/madbull-troy-trx-battlerail-7-inch-with-3pcs-qd-rail.html#.UzMZWpIgGK0

None in at the mo - can get one in for you though. Doing orders today

EDIT: That rifle is also ready to collect!

Mini Dude wrote: »

If you could get these in how much?
http://shop.ehobbyasia.com/bf-pdw-hand-stop-w-qd-sling-swivel.html#.UzNBkYVoq-U
http://shop.ehobbyasia.com/5ku-kac-qd-silencer-14mm-ccw.html#.UzNCboVoq-U
and a vfc 8' and 10' pdw please and thanks

First two are a no unfortunately, and I'm awaiting confirmation on price for the PDW's. Will send a PM once they get back to me

Mini Dude

Inari wrote: »

First two are a no unfortunately, and I'm awaiting confirmation on price for the PDW's. Will send a PM once they get back to me

Ok Thanks

Ebr sniper

Inari wrote: »

None in at the mo - can get one in for you though. Doing orders today

EDIT: That rifle is also ready to collect!



First two are a no unfortunately, and I'm awaiting confirmation on price for the PDW's. Will send a PM once they get back to me

Also looking for a pdw so can you let me know a price please. Thanks

Tony2589

Inari wrote: »

None in at the mo - can get one in for you though. Doing orders today

EDIT: That rifle is also ready to collect!



Thanks ,any idea on the price of fixing the scar , and what was up with it , will get it picked it up on Saturday

Inari

Tony2589 wrote: »

Thanks ,any idea on the price of fixing the scar , and what was up with it , will get it picked it up on Saturday

Grand total of €25 - the Tech just has a brief description that says that the gun had been misfeeding and was due to a damaged hop up rubber. A new hop up rubber has been fitted, and the gun is working perfect

EBR_Sniper wrote:

Also looking for a pdw so can you let me know a price please. Thanks

No word back from our suppliers yet

ricka

ricka

Kriss Vector For Sale:

2nd Hand, 3 months old
Comes with 2 mags and recoil Kit
Sold As Seen
€300