www.HobbyAirsoft.ie (dublin)

maciek87

CpcRc wrote: »

A few small bits that I was wondering if ye have in the parts bin;
M4 mag catch (complete with spring and screw),
M4 selector switch with spring, disc and bearing,
Rear body pin for M4,
and the pin that goes through gearbox for above the trigger on a M4. Or if ye could verify if the one from a pdw would work that's fine too.

Hiya, Cork has:
m4 mag-catches - only some old, second hand ones lying around.
Definately try-before-buy thing.

M4 selector switches - G&G will do...? We`ll make it fit if need be.
Rear m4-body pin - should have about 50 somewhere around the place
Middle pin for m4 - yep, pdw should do.

I suggest to bring the gun, so we can make sure that pins and bobs are all sitting in well.

CpcRc

maciek87 wrote: »

Hiya, Cork has:
m4 mag-catches - only some old, second hand ones lying around.
Definately try-before-buy thing.

M4 selector switches - G&G will do...? We`ll make it fit if need be.
Rear m4-body pin - should have about 50 somewhere around the place
Middle pin for m4 - yep, pdw should do.

I suggest to bring the gun, so we can make sure that pins and bobs are all sitting in well.

Could of mentioned this earlier when I was in store?
I don't go online at work so seeing this now. I'll drop by again tomorrow sure.

Inari

SALE CONTINUES - Some Ex-Display & Refurb Items Added!

Large ASG 8.4v Batteries - ONLY €10!


CYMA M14 SOCOM ONLY €95!


Co2 Refurb's - Desert Eagle (semi & full auto) @ €90, Tanfoglio @ €90, M&P40 NBB @ €50, Taurus 24/7 V1 (low powered) ONLY €20!


DBoys M4A1 Carbine (Plastic) only €95, CA Proline M4 Carbine (Solid Stock; Full Metal) ONLY €175!


Green Gas Pistols - ALL ONLY €75; KSC 1911A1, KJW M9, Marushin SIG P210, HFC Desert Eagle, WE MEU etc

Tony2589

Hey , how's it going ? Any chance that my tri shot shotgun is fixed yet ?

Inari

Tony2589 wrote: »

Hey , how's it going ? Any chance that my tri shot shotgun is fixed yet ?

Hi Tony,

Just replied to your message on Facebook there!

everlast75

Hi there,
Any P99 either blowback or not for sale 2nd hand?

T4RGET

Hi lads, been a while since i was on Boards. anyways, did that VFC order ever land? still loooking for the wiring and the gas block for my M4, the gas block was Madbull though

goodlad

T4RGET wrote: »

Hi lads, been a while since i was on Boards. anyways, did that VFC order ever land? still loooking for the wiring and the gas block for my M4, the gas block was Madbull though

That VFC order landed on the 9th of July dude.

whydave

any more Ex-Display & Refurb Items (goodies !!!)?

ricka

everlast75 wrote: »

Hi there,
Any P99 either blowback or not for sale 2nd hand?

Sorry for late reply! Just one left which has a leaking mag.We are trying to fix, I'll let you know

T4RGET wrote: »

Hi lads, been a while since i was on Boards. anyways, did that VFC order ever land? still loooking for the wiring and the gas block for my M4, the gas block was Madbull though

It did indeed arrive.I'll be back to you shortly

whydave wrote: »

any more Ex-Display & Refurb Items (goodies !!!)?

Hi Dave, yes we've a few more additions which we'll be puting up today.Also we received a Madbull and G&G order today.More info in an hour or two

maxwarren

hey just wondering how much it would cost me to have you lads change out the wiring in my g36 to low resistance wiring and change the connecters to deans?

matty1994

hi lads just wondering if you have parts for a taurus pt 24/7 , inlet valve and outlet valve, and also an inlet valve for a kjw sig p226 , or a cheap taurus pt 24/7 for sale?

T4RGET

goodlad wrote: »

That VFC order landed on the 9th of July dude.

Holy s**t :eek:.. I've been airsofting but haven't checked facebook or boards in well over 3 weeks. studying and all for repeat exams Cheers mate.

ricka wrote: »

It did indeed arrive.I'll be back to you shortly

Cheers Richy, clearly need to watch this space more often

ricka

everlast75 wrote: »

Hi there,
Any P99 either blowback or not for sale 2nd hand?

1 left with leaking mag which we can't fix!:(

T4RGET wrote: »

Hi lads, been a while since i was on Boards. anyways, did that VFC order ever land? still loooking for the wiring and the gas block for my M4, the gas block was Madbull though

No Target not in stock

whydave wrote: »

any more Ex-Display & Refurb Items (goodies !!!)?

I'll get a photo up shortly

maxwarren wrote: »

hey just wondering how much it would cost me to have you lads change out the wiring in my g36 to low resistance wiring and change the connecters to deans?

Hi €35

matty1994 wrote: »

hi lads just wondering if you have parts for a taurus pt 24/7 , inlet valve and outlet valve, and also an inlet valve for a kjw sig p226 , or a cheap taurus pt 24/7 for sale?

Should have all the bits for the 24/7 but not for the 226.Drop in if you can

ricka

ricka

Last Of Our Collectors Sale Rifles With Further Reductions:

Dboys M4 Carbines With Chargers now only €75 Update: Both Now Sold




CA Proline M15A4 Now Only €145 (used only few times in back garden) Update: Now Sold

ricka

Last Two Items Available From Our Collectors Sale

UPDATE: Both now sold

Recoil12

Is the CYMA M14 SOCOM advertised a few days back still available ?

ricka

Recoil12 wrote: »

Is the CYMA M14 SOCOM advertised a few days back still available ?

Don't think so, I'll check with Robbie and get back to you.All that's left is a couple of items which weren't working but I'll let you know Monday

Recoil12

ricka wrote: »

Don't think so, I'll check with Robbie and get back to you.All that's left is a couple of items which weren't working but I'll let you know Monday

Perfect,thanks.

otmmyboy2

Any chance you could source an A&K ptw?

Found one on Airsoft GI but they don't ship outside the states: http://www.airsoftgi.com/product_info.php?products_id=14898

And another from a Belgian website but they can't ship guns due to their weapons laws:
http://www.airsoftshopeurope.com/a-k-ptw-mk4-m4a1.html

everlast75

Hey lads,
Looking for the we bull dog - what's the price please?

Also, do you have the TM px4 or WE version?

Cheers

ricka

otmmyboy2 wrote: »

Any chance you could source an A&K ptw?

Found one on Airsoft GI but they don't ship outside the states: http://www.airsoftgi.com/product_info.php?products_id=14898

And another from a Belgian website but they can't ship guns due to their weapons laws:
http://www.airsoftshopeurope.com/a-k-ptw-mk4-m4a1.html

]

I'll check that for you on Tuesday

everlast75 wrote: »

Hey lads,
Looking for the we bull dog - what's the price please?

Also, do you have the TM px4 or WE version?

Cheers

Don't have either in stock at the moment sorry!

ricka

WE'RE
OPEN TOMORROW
Bank Holiday
MONDAY
12 TILL 5
(Rathcoole Only)

ricka

Reminder

ricka wrote: »

WE'RE
OPEN
Bank Holiday
MONDAY
12 TILL 5
(Rathcoole Only)

ricka

Recoil12 wrote: »

Is the CYMA M14 SOCOM advertised a few days back still available ?

Hi, we have one M14 left, it works fine but does have a broken outer barrel
It's €60

update: now sold

Recoil12

Thanks for that,I was hoping it would be in better condition,I'll have to pass,thanks anyway.

ricka

Recoil12 wrote: »

Thanks for that,I was hoping it would be in better condition,I'll have to pass,thanks anyway.

Ok fair enough, we did have a couple in the collectors sale but they all sold.

We do of course have the CYMA M14 in our general stock

http://www.hobbyairsoft.ie/index.php?route=product/product&path=36_39&product_id=222

otmmyboy2

ricka wrote: »

I'll check that for you on Tuesday

Lovely, thanks very much.

ricka

otmmyboy2 wrote: »

Any chance you could source an A&K ptw?

Found one on Airsoft GI but they don't ship outside the states: http://www.airsoftgi.com/product_info.php?products_id=14898

And another from a Belgian website but they can't ship guns due to their weapons laws:
http://www.airsoftshopeurope.com/a-k-ptw-mk4-m4a1.html

Have fired off a couple of emails on this.Wait and see..........

everlast75 wrote: »

Hey lads,
Looking for the we bull dog - what's the price please?

Also, do you have the TM px4 or WE version?

Cheers

Hi mate, just to let you know we're doing a WE order at the end of the week.If you want to add anything on, not a problem!