The **WANTED** Thread

Dusty87

Well folks, im looking for an l200 for breaking asap around the midlands area! 02 model. Looking for the moulding on the front bumper that continues on from the wheel arch. Or if anyone has a price of one in a mitsi garage would be great too.

colm_mcm

try www.partfinder.ie

roxychix

just wondering if you would know how much it would be to put a towbar on ld fr 02. cheap as poss. used for towing horses thanks

101sean

Buy a complete kit inc electrics yourself and get a mechanic to fit it, will take about an hour. Complete kit can be got for £100 or so from the UK or Crozier 4x4 or West Coast Spares here.

The electrics just plug in to the loom, the socket is tucked in behind the trim at the rear on the RHS.

http://www.lrseries.com/shop/product/listing/12390/STC50391-TOW-KIT-INC-ELECTRICS.html?search=tow&page=1

http://www.paddockspares.com/stc50391-towing-ball-kit-fixed.html

Freelander will be fine with a single horse, a twin box will probably be over the manufacturer's towing limit (2 tonne)

kincaid

Looking for a good Jcb 3cx from 1986 -1991 if anyone can help, 4WD if possible

thanks

oflynno

Someone somewhere must have a jeep in the way

I need one FREE, before I go nuts

spuddoorley

I'm looking for a 70- 80 hp tractor in need of restoration
Intend on working it over the summer months, drawing turf and the like
cash is tight

Ford4000

Rough budget?

spuddoorley

looking to buy a zetor fiat international ford in need of restoration anything considered between 60 and 85 horsepower.
small money

spuddoorley

biko wrote: »

I suppose contacting a few tractor dealers would be a good start? Did you try that already?

i saw one split while tipping a silage trailer years ago, it was welded later that day and continued as if it never broke,
chance her on

spuddoorley

Ford4000 wrote: »

Rough budget?

up to 1500

newmug

Looking for a MF 1135 for restoration. Must be running.

Hermy

I'm looking for a Boost Pressure Sensor for an '03 Nissan Primastar if anyone could suggest where to look. Thanks.

Part No. 7700111957

stackerman

Hi
Still Looking for a bed liner and mountain top for a 05 Toyota Vigo, double cab.
PM please
Thanks

Top Dog

Looking for a pair of front window wind deflectors for a '05 Shogun/Pajero LWB if anyone has any, or has seen any in a scrap yard? Would prefer the ones that sit inside the window frame rather than the ones that are stuck onto the door frame with double-sided tape.

granpa

hi iam looking for a back actor for a tractor amc connel or or such ,thanking you

sjdownie

anyone looking for a rear canopy for an isuzu dmax ? its a sammitr, metallic green. reasonably priced

.17hmr

DONE

SKIPPY150

Looking for a transfer box for a 94 Fourtrack. Woult considder complete box if its in good nick cheers.:)

JohnBoy

looking for a clean seven seater TD5 discovery.

2-4 grand to spend, anyone have anything not already on donedeal/carzone?

Farmlife

Hello, i'm looking for a set of navara d40 roof bars like the ones below, anyone have any idea if there's a good 4x4 breakers near dublin that would be worth a try? Thanks

Buford T Justice

Lookin for a 24V microwave to suit a truck, if anyone knows where one might find one?

John J. Lyons

Hi looking for parts for Renault tractors, one that is dammaged, half scrapped or mechanical problems both 4 and 6 cylinders or if anyone knows where there is one parked up for sale with the above sympthoms can you PM me on here
Wanted for own use

Thanks

DarrenCroker

Looking for tyres 650r 16c. For a 92 mitsubishi canter,can't find any. If anybody has any or knows of any let me know,cheers

unimog1968

Hi there, does anyone know of a hard top to suit a PAJERO J Top (soft top)
thanks.

Mark Corrigan

I have a ford 6610 with a ap cab and the doors are completely rotten on they are well passed repair. So I am wondering does anyone know where I could get a pair for cheap. I've looked around and they seem to b quite expensive. Can anyone help??

Thanks
Mark

broro22

Yanmar stop solenoid

Any one got a yanmar 3 cylinder engine breaking looking for a stop solenoid.

case885

Hi im looking for 2 doors for a case 885 XL and also the interior any help is appreciated

blue5000

Looking for some UNF bolts, 7/16, 2 and a quarter inch long, 12.9 strength. Need 4 to hold a flywheel on a cat loader, tried Hassets in Limerick, no joy.

MrFoxman360

I use Dublin nut and bolt company, not too far from me

http://www.dublinboltandnut.com/

ci985

Hi all anyone out there know of where i might get a decent
combine harvester for less than ten grand? Been to look at
several and they all seem overpriced for the condition they are in!

blue5000

MrFoxman360 wrote: »

I use Dublin nut and bolt company, not too far from me

http://www.dublinboltandnut.com/

Thanks foxman, found them here http://www.aseriesspares.co.uk/

andymann

Does anyone know where on the internet I could get a manual for a Ransomes TS 59 G plough? And where to source some coulters, skimmers for it?
Thanks:)

blue5000

Keep an eye out on ebay.co.uk

found these similiar ones,
http://www.ebay.co.uk/sch/i.html?_nkw=Ransomes+TS+59&_sacat=0&_odkw=Ransomes+TS+59&_osacat=0

No 'G' ones though.

As for parts westlake plough parts. Try google.

The only way you'll find parts in Ireland is to get lucky in an old hardware shop. Maybe try N. Ireland ploughing association too. I think a lot of the skimmers are fairly common to different models so something off a later plough might suit you?

Good luck

john m 1

Hi there,
Re. your ransomes plough parts, give Pratts of Abbeyleix Co. Laois a ring they might have something.

hunterpajero

im looking for a power steering pump with a ribbed pulley wheel for a 1996 pajero irish model,have changed the engine but the pulleys on it are ribbed and not v belt type that was on my old one,any help?

747dots

Howya boys n girls. thinking of going back to a crew cab and sniffing around for a good bus. just wondering if anyone has any views on an 05 d-max as the 1 for me??? navaras seem to have too many probs??? and the dmax seems to be an honest worker. any older crew cabs (L200 etc) and they all mad money (for exports i hear) so hoping to spend a few quid extra for a decent bus.would love to be getting a vw splitty or a westie but dont think it would last too long back on site again!!!! any thoughts much appreciated. cheers. dots

adne

I'm looking for two second hand tyres - 275 70R 22.5

Also looking for second hand 135 wheel (tyres and rims)

Any tips on where could source these

w124man

Hi, Im looking for an aluminium roof rack as fitted to all those Pajeros and Landcruisers that filled our roads back in the 90's. Any one got one?

colm_mcm

Try the likes of west end motors in mullingar.

CJhaughey

w124man wrote: »

Hi, Im looking for an aluminium roof rack as fitted to all those Pajeros and Landcruisers that filled our roads back in the 90's. Any one got one?

I have one, Not sure what the measurements are but I can measure it tonight and get some pics?

w124man

CJhaughey wrote: »

I have one, Not sure what the measurements are but I can measure it tonight and get some pics?

Great stuff CJ. Keep in touch

_Conrad_

Wanted: 90s transit hi cube roof. Just the roof.

Nissan patrol

Hi All,
I am restoring an 1985 nissan patrol 160 series. I am looking for the front grille ( square headlights). nissan Ireland & nissan uk dont have one. Can anyone help?

101sean

May be worth trying Milners, they don't list it but may know where you could get one http://www.milneroffroad.com/nissan/patrol

Nissan patrol

Thanks 101Sean. Nothing to loose. Will try that.

Gorteen

Left hand door mirror broken on 07 Pathfinder...
New one costs almost €400!!!

Any tips on where I might get one second hand? I've tried local breakers but they have never had a Pathfinder in! The duct tap will never pass the NCT!!!

GoodisonPark

Try Traynors , they have a next day delivery to anywhere in the 26 counties.
www.traynors.co.uk

101sean

Milner's have two pages of new Pathfinder Mirrors for £78 max. http://www.milneroffroad.com/nissan/pathfinder/r51m-2-5td-12005/r51m-ancillary

Gorteen

To Goodison Park and 101 Sean...............many, many thanks!

Looks like they both should be able to supply.