Labour Saving and General Guntering

timple23

Was thinking of putting up shelving as storage. Would it be cheaper to buy or build? I wouldn't be familiar with steel prices. These look cheap and capable weight wise. https://www.screwfix.ie/p/heavy-duty-shelving-900-x-450-x-1800mm/2817r

893bet

timple23 wrote: »

Was thinking of putting up shelving as storage. Would it be cheaper to buy or build? I wouldn't be familiar with steel prices. These look cheap and capable weight wise. https://www.screwfix.ie/p/heavy-duty-shelving-900-x-450-x-1800mm/2817r

They are the finest to be honest for most things. They are very light but strong. I have 5 cable tied together and to the wall and they are grand.

emaherx

timple23 wrote: »

Was thinking of putting up shelving as storage. Would it be cheaper to buy or build? I wouldn't be familiar with steel prices. These look cheap and capable weight wise. https://www.screwfix.ie/p/heavy-duty-shelving-900-x-450-x-1800mm/2817r

You are unlikely to build something like them cheaper unless you have suitable materials lying about already.

Tileman

I bought some from rackzone earlier in the year. Decent quality for price and make the Workshop look better

Aravo

From rackzone. Second hand but like new. Easy to assemble and adjust if wanted

emaherx

Looks decent.

tractorporn

Lads just to update. Thanks for all the replies and ideas I kinda took half of stonewalls idea and bought two 10ft sheep penning gates this morning in the Co-OP. I welded two small bits of box to the rsj and I budged a plate into the wall and got some concrete screws for that into the house wall, thanks to stock for the suggestion. With the eyes on the gates turned out to be the exact fit for the span and I have some stokboard which I will tex screw onto it tomorrow. Please ignore the welding.

raypallas

tractorporn wrote: »

Lads just to update. Thanks for all the replies and ideas I kinda took half of stonewalls idea and bought two 10ft sheep penning gates this morning in the Co-OP. I welded two small bits of box to the rsj and I budged a plate into the wall and got some concrete screws for that into the house wall, thanks to stock for the suggestion. With the eyes on the gates turned out to be the exact fit for the span and I have some stokboard which I will tex screw onto it tomorrow. Please ignore the welding.

Nothing too wrong with that, fairplay.

Aravo

emaherx wrote: »

Looks decent.

Originally I was thinking of making my own shelving out of timber and plywood. With heading off buying stuff, using a few hundred screws, making it, it would all take time, and making adjustments down the line would be very time consuming. I then went to rackzone with the intention of buying similar to the screw fix image. Came home with much better shelving. Each unit is 9ft long, 3ft deep and 8ft high. Very good quality, even got the sheeting for each level there. So no cutting sheets and a lot of waste.
A few people have seen it and were impressed with it.

cjpm

Aravo wrote: »

Originally I was thinking of making my own shelving out of timber and plywood. With heading off buying stuff, using a few hundred screws, making it, it would all take time, and making adjustments down the line would be very time consuming. I then went to rackzone with the intention of buying similar to the screw fix image. Came home with much better shelving. Each unit is 9ft long, 3ft deep and 8ft high. Very good quality, even got the sheeting for each level there. So no cutting sheets and a lot of waste.
A few people have seen it and were impressed with it.

What was the lolly for those shelves?? Look a great job.

Aravo

cjpm wrote: »

What was the lolly for those shelves?? Look a great job.

It works out at 20-25 per cent more expensive than the screwfix type shelf. That's based on how many of the screwfix ones I would need of the 1.8x0.9x.45 to fill the volume of the shelving than I got. Also with this heavy shelving, it cannot be pulled down, so from a safety point of view its a big bonus especially if there are little ones about.

bamayang

Dunno if ye watch much YouTube stuff, but this lad is worth following. He makes ingenious inventions! The motivation for this most recent one will resonate with most lads here I’d say!

https://youtu.be/ktaaxc8ErPE

Kevhog1988

bamayang wrote: »

Dunno if ye watch much YouTube stuff, but this lad is worth following. He makes ingenious inventions! The motivation for this most recent one will resonate with most lads here I’d say!

https://youtu.be/ktaaxc8ErPE

https://www.youtube.com/watch?v=BQ9EW8rxxPk this yoke he built is class

emaherx

bamayang wrote: »

Dunno if ye watch much YouTube stuff, but this lad is worth following. He makes ingenious inventions! The motivation for this most recent one will resonate with most lads here I’d say!

https://youtu.be/ktaaxc8ErPE

Yes, he's featured in this thread before. Very tasty work.

Aravo

Just wondering if anyone has made up an hydraulic ram system for moving a roller on wheels. Photographs and tips welcome

emaherx

funkey_monkey wrote: »

Thanks, looking to build up one here and wondering what the standard dimensions are. I think internal heights are around 6ft and overall height around the 10ft mark.

Just happened to have the tape out today.
2.5 foot from ground to floor.
7 foot from floor to roof.
Rear door is the full 7 foot.

Hope that helps you.

funkey_monkey

emaherx wrote: »

Just happened to have the tape out today.
2.5 foot from ground to floor.
7 foot from floor to roof.
Rear door is the full 7 foot.

Hope that helps you.

Great thanks. We'll have to drop the roof height on ours to get it fitting into shed. I think it might be more work than it's worth and it might be a bit too tight for some of the lanes, but we'll see what happens.

Anyhow thanks for checking that for me. You made a good purchase there.

Kevhog1988

Made a wire pullers for sheep netting today. Not within an asses roar of anything ye boys are capable of but my first time really welding anything so im happy how it turned out.


https://flic.kr/p/2iXhjLN

https://flic.kr/p/2iXfNba

davidk1394

Kevhog1988 wrote: »

Made a wire pullers for sheep netting today. Not within an asses roar of anything ye boys are capable of but my first time really welding anything so im happy how it turned out.


https://flic.kr/p/2iXhjLN

https://flic.kr/p/2iXfNba

Will you feed the wire through and then attach gripples to hold it ?

Nekarsulm

Kevhog1988 wrote: »

Made a wire pullers for sheep netting today. Not within an asses roar of anything ye boys are capable of but my first time really welding anything so im happy how it turned out.


https://flic.kr/p/2iXhjLN

https://flic.kr/p/2iXfNba

Do the job 100% as well as a bought one.
Plus the satisfaction of something you've made yourself.

bamayang

Nekarsulm wrote: »

Do the job 100% as well as a bought one.
Plus the satisfaction of something you've made yourself.

Very nice. Do you have to open all 5 bolts each time to move it on?

raypallas

bamayang wrote: »

Very nice. Do you have to open all 5 bolts each time to move it on?

Could weld on a piece of 20mm flat x 100mm long onto the top of the bolt to help opening and closing them. Save having to get a wrench to it everytime.

Nekarsulm

Yes, have to open them all each time you move it.#
A bit of a handle on each nut would be handy, right enough, you could always guve the handle a knock of the hammer if you thought they weren't tight enough.

bamayang

Nekarsulm wrote: »

Yes, have to open them all each time you move it.#
A bit of a handle on each nut would be handy, right enough, you could always guve the handle a knock of the hammer if you thought they weren't tight enough.

If you had one long bar and lots of little L shaped hooks, could you have it work that you wouldn’t have to tighten or loosen anything, just hook onto wire, pull tight and slip it off, might quicken it.

Kevhog1988

bamayang wrote: »

If you had one long bar and lots of little L shaped hooks, could you have it work that you wouldn’t have to tighten or loosen anything, just hook onto wire, pull tight and slip it off, might quicken it.

it takes less than 5 mins to get on or off so i was happy to have it like that and keep the strain on it. I have a ratchet spanner so very fast.

We pulled a stretch this morning and it worked the finest. Saves paying contractor!!

dzer2

Kevhog1988 wrote: »

it takes less than 5 mins to get on or off so i was happy to have it like that and keep the strain on it. I have a ratchet spanner so very fast.

We pulled a stretch this morning and it worked the finest. Saves paying contractor!!

Made one yrs ago. Very handy have a battery nut runner and welded bolts in. Have it on in less than a minute

wrangler

Kevhog1988 wrote: »

it takes less than 5 mins to get on or off so i was happy to have it like that and keep the strain on it. I have a ratchet spanner so very fast.

We pulled a stretch this morning and it worked the finest. Saves paying contractor!!

I use a ratchet and socket, I have nuts with handles originally but i replaced them with ordinary nuts, tightens better with the ratchet.

Nekarsulm

bamayang wrote: »

If you had one long bar and lots of little L shaped hooks, could you have it work that you wouldn’t have to tighten or loosen anything, just hook onto wire, pull tight and slip it off, might quicken it.

Nope, no good.
The vertical wires will pull along the horizontal ones, and it'll be a mess.
I have a washer under each nut, to make it a bit easier tightening them, and the biggest time waster is when you drop a washer or nut into long grass.

richie123

Nekarsulm wrote: »

Nope, no good.
The vertical wires will pull along the horizontal ones, and it'll be a mess.
I have a washer under each nut, to make it a bit easier tightening them, and the biggest time waster is when you drop a washer or nut into long grass.

Weld on 4 inch long bars to the nuts you'd do it very quick and do away with rachet and socket quicker tighten them up too.one less tool to lose also (rachet)

Kevhog1988

richie123 wrote: »

Weld on 4 inch long bars to the nuts you'd do it very quick and do away with rachet and socket quicker tighten them up too.one less tool to lose also (rachet)

Dont think youd get it as tight tbh