Firefly Rocket valve.

.22 Lover

Hi will this rocket valve from ehobby fit a regular KSC glock 26/19/23 it says its for system 7?

kinkstr

I highly doubt it if it says its for system 7. Theres a version on tokyo model for the ksc glock series but ive no idea on buying from them.
Heres a how-to on installing one on a glock
http://www.airsoftforum.com/board/Installing-Ksc-kwa-Glock-t126819.html

Dread-Lock

I wouldn't imagine that something from a system 7 would work in anything but a system 7.

.22 Lover

kinkstr wrote: »

I highly doubt it if it says its for system 7. Theres a version on tokyo model for the ksc glock series but ive no idea on buying from them.
Heres a how-to on installing one on a glock
http://www.airsoftforum.com/board/Installing-Ksc-kwa-Glock-t126819.html

But KSC dont make a system 7 glock and in that form it says that the firefly one is the best so i just think ehobby got there info wrong o and thanks for that form i really helps.

Witcher

.22 Lover wrote: »

But KSC dont make a system 7 glock and in that form it says that the firefly one is the best so i just think ehobby got there info wrong o and thanks for that form i really helps.

They plan on releasing a System 7 Glock in the future but this won't fit a standard Glock.

.22 Lover

Then witch metal one will?

Witcher

.22 Lover wrote: »

Then witch metal one will?

Which model Glock do you have?

.22 Lover

Blay wrote: »

Which model Glock do you have?

KSC Glock26C

Witcher

.22 Lover wrote: »

KSC Glock26C

http://shop.ehobbyasia.com/upgrade-part/parts-upgrade-pistol/valves-kits/action-valve-ksc-series.html

This is the only one for a KSC in stock on Ehobby, the likes of WGC and Redwolf should have Guarder etc ones for the KSC.

.22 Lover

Thats not a rocket valve that goes in the magzine the reason i want the metal valve is beacause the standard ones brake the metal ones last forever.I think ill get it and see if it fits as WGC has the exact same thing on their website but it sats its for the glock AND system 7

Sam Fisher

http://airsoftglobal.com/product_info.php?products_id=3743

http://airsoftglobal.com/product_info.php?products_id=4031

Not sure are the above two are similar to the one you mentioned, have them fitted on my G19s, but can't comfirm on the G26.

Also got this a few months ago for the G19, http://www.redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=20836 , uses more gas, but the performance is worth it!!

.22 Lover

Well all the KSC glocks internal rocket valve is the same size as far as i know the G26C is the smallest of the lot and packs alot of firepower as is.So since you ve fitted them what exactly do they do apart from being lasting forever?

Sam Fisher

Performance is better and recoil is sharper. Have the KSC G19, metal slide. Fires about 270fps, with the Firefly and Shooter, both increased fps to around 290. With the Power-up, it shoots at 310fps. Now, you may want to change the floating valve on the mag and change the recoil spring and get a tighbore barrel (Madbull is what I used), the G19 now shoot at 325fps (room temp).

.22 Lover

How many rounds will you get out of the mags?

Sam Fisher

With no modification, the G19 hold 20rds, I normally only put 18 per mag. Once full charge of Green Gas, I would get just over two mags, between 36-40 rds. With the Power-up, I am getting one and a bit (18-24rds). Please bear in mind that I have hi-flow valves on my mags.

.22 Lover

Well it sounds like you made a good choice so i think ill go with a metal rocket valve and lots of new mags but ill stick with thoes and i also want to stick a G17 outer and inner barrel for more accuracy and a custom look.

Sam Fisher

Best of luck mate. Hope it works out for you.

.22 Lover

Cheers:D:D