Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

NTL/UPC or router issue?

  • 31-12-2009 2:59pm
    #1
    Registered Users, Registered Users 2 Posts: 2,932 ✭✭✭


    The modem is a Scientific Atlanta EPC 2203. The 10mb connection is routed with a DLINK 655.

    When I restart the DLINK router I get good connection for a while(ie I can ping boards with 11ms) - I have the latest firmware on it.
    After a few minutes the ping to boards would go up to 2000-3000ms.

    I've been happily playing online until yesterday when all this started for no reason what so ever.

    I'm based in Galway

    before I restart the DLINK:
    C:\Users\Sniipe>ping www.boards.ie
    Pinging www.boards.ie [89.234.66.107] with 32 bytes of data:
    Reply from 89.234.66.107: bytes=32 time=4004ms TTL=59
    Reply from 89.234.66.107: bytes=32 time=3032ms TTL=59
    Reply from 89.234.66.107: bytes=32 time=2924ms TTL=59
    Reply from 89.234.66.107: bytes=32 time=2236ms TTL=59
    Ping statistics for 89.234.66.107:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 2236ms, Maximum = 4004ms, Average = 3049ms
    C:\Users\Sniipe>ping www.google.ie
    Pinging www.l.google.com [216.239.59.147] with 32 bytes of data:
    Reply from 216.239.59.147: bytes=32 time=2292ms TTL=57
    Reply from 216.239.59.147: bytes=32 time=2842ms TTL=57
    Reply from 216.239.59.147: bytes=32 time=2944ms TTL=57
    Reply from 216.239.59.147: bytes=32 time=3324ms TTL=57
    Ping statistics for 216.239.59.147:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 2292ms, Maximum = 3324ms, Average = 2850ms

    After I restart the DLINK:
    C:\Users\Sniipe>ping www.boards.ie
    Pinging www.boards.ie [89.234.66.107] with 32 bytes of data:
    Reply from 89.234.66.107: bytes=32 time=11ms TTL=59
    Reply from 89.234.66.107: bytes=32 time=34ms TTL=59
    Reply from 89.234.66.107: bytes=32 time=26ms TTL=59
    Reply from 89.234.66.107: bytes=32 time=13ms TTL=59
    Ping statistics for 89.234.66.107:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 11ms, Maximum = 34ms, Average = 21ms
    C:\Users\Sniipe>ping www.google.ie
    Pinging www.l.google.com [216.239.59.147] with 32 bytes of data:
    Reply from 216.239.59.147: bytes=32 time=29ms TTL=57
    Reply from 216.239.59.147: bytes=32 time=13ms TTL=57
    Reply from 216.239.59.147: bytes=32 time=15ms TTL=57
    Reply from 216.239.59.147: bytes=32 time=15ms TTL=57
    Ping statistics for 216.239.59.147:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 13ms, Maximum = 29ms, Average = 18ms

    This may be where the problem is??? :
    I have 2 routers and my machine tells me I am currently connected to both of them

    I have a DLINK 655 connected to UPC's modem and I have a belkin connected to the DLINK

    The idea is that the DLINK gives me wireless access upstairs and the belkin gives me access to wireless downstairs.

    I'm on my laptop which is connected by a wire to the belkin and its wireless is on also.

    On Vista the hovering over the network gives me
    DLINK is local and internet
    Belkin is local only (with wifi signal beside it)

    Any ideas?


Comments

  • Registered Users, Registered Users 2 Posts: 16,288 ✭✭✭✭ntlbell


    can you go from the modem and by pass the d-link and test?

    or can you login to that particular modem and ping/trace direct from the modem?


  • Closed Accounts Posts: 126 ✭✭the_law


    You're not torrenting at the same time are you? Or someone else in your household?

    If not, you can connect your machine directly to the EPC2203 via Ethernet (with your router and everything else disconnected) and see how you get on. If no improvement, try a different computer to rule out the influence of spyware/trojans etc... then, and only then it's definitely UPC's issue.


Advertisement