Quality Airsoft Supplies

Arkslippy

Lads, if an aeg is shooting at .5j but rate of fire is fine, range short compared to previous, do you reckon its a knackered spring and if so would you have one for a dboys Pdw.

Adjusting the hopup is doing nothing either, or if it is, not noticeable.

Madbull ultimate hopup, newish.

TNTQ

Arkslippy wrote: »

Lads, if an aeg is shooting at .5j but rate of fire is fine, range short compared to previous, do you reckon its a knackered spring and if so would you have one for a dboys Pdw.

Adjusting the hopup is doing nothing either, or if it is, not noticeable.

Madbull ultimate hopup, newish.

Short range is explained by lack of power. Does it make any alarming noise? Before gutting out gearbox, I would look for answers in Hop-Up/Barrel department.

br,
Mike

Arkslippy

No, it sounds perfect. And the flow of bbs is fine, just the odd one firing off high to the left. There is a little movement in the outer barrel though. Either way I'd like to push it up to thhe joule.

the_punisher

Gents,

Do ye have the following in stock:
G&p m120 short motor
Polycarbonate piston
High speed gears

I have an m4 I want to upgrade

Darth Phoenix

the_punisher wrote: »

Gents,

Do ye have the following in stock:
G&p m120 short motor
Polycarbonate piston
High speed gears

I have an m4 I want to upgrade

+1 on those parts

I want to bring up my masada for ROF tune up

TNTQ

the_punisher wrote: »

Gents,

Do ye have the following in stock:
G&p m120 short motor
Polycarbonate piston
High speed gears

I have an m4 I want to upgrade

Darth Phoenix wrote: »

+1 on those parts

I want to bring up my masada for ROF tune up

M120 Motors are on an order that lands with customs in the morning, so they should be here in a few days.

VFC polycarbonate Piston - yes
VFC Self-shimming High Speed Gearsets - yes

€35 + €20 + €55 = €110

Masada's require short reach motors and I'm not sure how many of them are not already spoken for. I'll find out tomorrow.

TNTQ

See Poll above and please vote lads

Villafan6

I voted yes but I want to change now because if you do move to Dublin, I will have no more money!

Blazer

I think ye should move to Limerick...Dublin has enough poxy shops!!!

J.D.R

I voted no because I don't think you should move. Mostly with Dublin having enough shops already

Scody94

no too many shops in dublin on the other hand Laois is a lovely place :P

TNTQ

J.D.R wrote: »

I voted no because I don't think you should move. Mostly with Dublin having enough shops already

Enough shops but maybe not enough work-shops who deal in the ridiculous

Blazer

TNTQ wrote: »

Enough shops but maybe not enough work-shops who deal in the ridiculous

speaking of which...I'm looking to upgrade my TM L96 with a power upgrade + precision barrel (PDI 6.01mm x 500mm).
500mm is long enough as I don't fancy hauling around somethign longer than that

Any idea of the upgrade costs if I drop it upto ye sometime in the next month or so?

TNTQ

Sc@recrow wrote: »

speaking of which...I'm looking to upgrade my TM L96 with a power upgrade + precision barrel (PDI 6.01mm x 500mm).
500mm is long enough as I don't fancy hauling around somethign longer than that

Any idea of the upgrade costs if I drop it upto ye sometime in the next month or so?

I'll let Michal give you a shout tomorrow - he's the spring rifle guy :pac:

thebillynator

Move to Cork there is a shortage of shops in the south

clubberlang12

Move to the north-west.....nobody up here

tommy gun

clubberlang12 wrote: »

Move to the north-west.....nobody up here

+1 to that.

TNTQ

clubberlang12 wrote: »

Move to the north-west.....nobody up here

Eh, you answered your own Question :rolleyes:

BTW, your stuff is in Customs in the morning mate, should be just a few days (Hopefully)

thehorse

Hey Cha,

As discussed last week, I plan to come to ye tomorrow to get those upgrades done to my masada. Ill give ya a shout in the morning re parts.
Thanks
Dave

clubberlang12

Haha.....no shops i meant!!!!!

Good news about the order.....at last

elDiablo79

lads you sud defo move to dublin. there is other shops in dublin but very few quality shops and even less gud work shops.;) the big smoke is calling for you lads:D

scar 101

thebillynator wrote: »

Move to Cork there is a shortage of shops in the south

+1 Cork or Limerick

Stuartp

That Was Suprising U look Like ammunation Out of san Andreas Xd Dont call me a Kid!

TNTQ

Stuartp wrote: »

That Was Suprising U look Like ammunation Out of san Andreas Xd Dont call me a Kid!

?

$kilkenny

a place in clonmel cahir would be geographically good with cork,waterford, south tip, some of kilkenny perhaps being covered as theres already too many in dublin

munster_mafia

Maybe the QAS roadshow. Get a truck, kit it out and go around the country?!

Scody94

munster_mafia wrote: »

Maybe the QAS roadshow. Get a truck, kit it out and go around the country?!

Holy **** that would be legendary

TNTQ

Unfortunately, you gotta go where the money is...:rolleyes:

AGB_Ghost

TNTQ wrote: »

Unfortunately, you gotta go where the money is...:rolleyes:

Hmm TNTQ in Dublin, just may do 6th year work experience there :cool:

Genghiz Cohen

What?!
No!

pyro jim

last trip to Dublin cost 30yoyo for petrol alone >.<
Don't leave us boggers!!

But if ye do move... closin up session in the shop yaaa? Can't leave it sober anyways.

thehorse

Hey Charlie,
The postman delivered the g&p m120 motor today so ill be down to the shop today to get those upgrades done to my masada that I spoke to you about.
Thanks,
Dave

Keegan

"Should Quality Airsoft Supplies move up to the Dublin?"


Should I just give my job's pay roll clerk your account number now so my wages transfer direct to you or do you still rather have cash? lol

Rick Deckard

Sc@recrow wrote: »

I think ye should move to Limerick...Dublin has enough poxy shops!!!

Thats the problem.. too many poxy shops. not enough Quality shops..
Get it??? Qual.... ah forget it.

Get up here quick lads.. north side if possible.. (cheaper rent)

AGB_Ghost

peatcass wrote: »

Thats the problem.. too many poxy shops. not enough Quality shops..
Get it??? Qual.... ah forget it.

Get up here quick lads.. north side if possible.. (cheaper rent)

True, I travel to TNTQ because Charlie & Mike and everyone there are nice people, unlike a few experiences with other retailers, they do their job and do it well, unlike other experiences and they have fair prices, by far my most favorite shop in all of Ireland, and would be siked if they came to dublin.....south dublin

TNTQ

AGB_Ghost wrote: »

True, I travel to TNTQ because Charlie Mike and everyone is there are nice people, unlike a few experiences with other retailers, they do their job and do it well, unlike other experiences and they have fair prices, by far my most favorite shop in all of Ireland, and would be siked if they came to dublin.....south dublin

Your cheque is in the post :pac:

AGB_Ghost

TNTQ wrote: »

Your cheque is in the post :pac:

There is something I need to ask you in PM's actually.

elDiablo79

north dublin lads north dublin. there is more airsoft sites on the northside and more players.:D;)

$kilkenny

well if you need a place in kilkenny my back yard is free.... cheap rent which can be payable with airsoft equioment
just need to build a place for it..... but still very flexible

and as Ghost said great guys,great service, and great guns!
always willing to help!

ricka

Southside only Charlie:D

TNTQ

We may roll the dice and see what happens

$kilkenny

c'mon back yard!!:p

Boa.Prinz

Mike/Charlie/Engineer Dude,

Can you recommend a charger and battery for my TM PSG-1?

Seem to only get a couple of hours skirmishing before it dies. Mentioned this to a guy in a popular Dublin Airsoft shop and he suggested that I buy a TM charger and battery. Dammed strangest thing I ever heard.:rolleyes:

BTW... How come yee stopped sellin the PSG-1:eek:

BTW, BTW... Likin the M14 EBR on you site. How quickly could you land one in Carlow.:P

Thx

TNTQ

Boa.Prinz wrote: »

Mike/Charlie/Engineer Dude,

Can you recommend a charger and battery for my TM PSG-1?

Seem to only get a couple of hours skirmishing before it dies. Mentioned this to a guy in a popular Dublin Airsoft shop and he suggested that I buy a TM charger and battery. Dammed strangest thing I ever heard.:rolleyes:

BTW... How come yee stopped sellin the PSG-1:eek:

BTW, BTW... Likin the M14 EBR on you site. How quickly could you land one in Carlow.:P

Thx

1. How long do you have that PSG-1?
2. How long are you using it before it stops working?
3. Does it happens on all batteries you have?
4. How does it dies? Goes silent or keep trying to pull gears?

br,
Mike

Marcin B

Hi,

I was told that my silencer arrived. If I drop in today would you be able to find a full cylinder and install it together with a tightbore (I got one: 509mm) on my Scar (G&G)? Love to chat with you guys but it's a long way to Carlow.

TNTQ

Marcin B wrote: »

Hi,

I was told that my silencer arrived. If I drop in today would you be able to find a full cylinder and install it together with a tightbore (I got one: 509mm) on my Scar (G&G)? Love to chat with you guys but it's a long way to Carlow.

We have all we need to do up your gun man.

br,
Mike

munster_mafia

Well lads, could ye let me know what I have left to give ye for that custom job?

dunnyg36kv

ah lads dont move to dublin, traffic is a c**t, move more towards offaly, we are lacking in any airsoft shops, u'd clean up

TNTQ

munster_mafia wrote: »

Well lads, could ye let me know what I have left to give ye for that custom job?

€2 Million Euro :pac:

Marcin B

About my SCAR. If you want to test it with the mags that were in my bag, bear in mind that the BBs in midcap are .20 and the ones in highcap are .23