Quality Airsoft Supplies

Scody94

Hey lads

bit of an odd one
have you any spare hex screws for a magpul pistol grip.
i took mine of and cant seem to find where i left them

Sean

TNTQ

Scody94 wrote: »

Hey lads

bit of an odd one
have you any spare hex screws for a magpul pistol grip.
i took mine of and cant seem to find where i left them

Sean

No sure, probably. However, all stuff is in the boxes

AGB_Ghost wrote: »

yes there is kind of like a section has been cut away on the smaller end, and no, but it is a VLTOR, but its Pin slot is in the front not the rear, ill get a pic up of my actual upper soon enough for you.

Do you have the same body as on the picture? I mean exactly the same with that single lip for the pin in the back? Look on the body before you answer. Best thing to do, is take photo of your Upper Reciver. The picture you have here is GBB Upper Reciver.

Scody94

TNTQ wrote: »

No sure, probably. However, all stuff is in the boxes

im after the longer of the two. i have a spare small standard M4 one but am in need of the longer hex. whenever you know could you please let me know

thanks
Sean

Blazer

hiya guys...any joy with that black VFC PEQ box? (laser+illuminator)

12gauge dave

hi im new to airsoft basically but have real firearms if that counts for anything in the airsoft world:D and im looking around at all different websites and guns etc

im very keen on your custom barret .50 caliber aeg sniper rifle:)

its a beauty just wondering does it come with a charger and everything i need to go plinkin away without any worries:D

is it low maintenance as i dont want to have it breaking down after a week as ive had a co2 cannister airsoft desert eagle that broke inside of a week:mad:

so any info would be more than thankful and remeber you are talking to a complete airsoft noob basically:D

TNTQ

Sc@recrow wrote: »

hiya guys...any joy with that black VFC PEQ box? (laser+illuminator)

Yes we have one.

TNTQ

12gauge dave wrote: »

hi im new to airsoft basically but have real firearms if that counts for anything in the airsoft world:D and im looking around at all different websites and guns etc

im very keen on your custom barret .50 caliber aeg sniper rifle:)

its a beauty just wondering does it come with a charger and everything i need to go plinkin away without any worries:D

is it low maintenance as i dont want to have it breaking down after a week as ive had a co2 cannister airsoft desert eagle that broke inside of a week:mad:

so any info would be more than thankful and remeber you are talking to a complete airsoft noob basically:D

Was tested and we don't expect anything happening to it. We can include battery and charger for you.

br,
Mike

Blazer

TNTQ wrote: »

Yes we have one.

ok..so can I order from the site or pm me your paypal email and sort it out that way?

TNTQ

Lads,

Shop in Carlow is now CLOSED.

Myself or Mike can still be reached on... 085 7037423 and 087 9386859

Should have everything moved and operational in a week/maybe two.

Stay tuned for more info.

Blazer

don't forget to post my peq box
and best of luck with the shop move..really must call up for upgrades

TNTQ

Sc@recrow wrote: »

don't forget to post my peq box
and best of luck with the shop move..really must call up for upgrades

Have it packed. Will go to post them shortly.

TNTQ

Goes like that, very, very simple.



Spring goes first on the forward assist. Then you put forward assist into the whole. Last thing you do is drive the pin into the opening.

Make sure that sring support on that pin. Pin has to go trough whole in the cut in the button. Cut is asymetic so it only works one way.

See picture below.

TNTQ

AGB_Ghost wrote: »

We have one problem, spring is too small to fit on the forward assist

Then you need different spring or different forward assist.

se conman

Best of luck with the move lads.

TNTQ

AGB_Ghost wrote: »

^
|
|

This is why I shop at TNTQ, nicest guys ever and actually care about their customers, if you guys need help with the move and putting stuff up and away let me know and I'll be up to your new place will bells on.

Some one might think we have nothing better to do

br,
Mike

M4A1guy

hey guys any chance you have one of these that would fit a dboys m4 cqb-r? id need the whole lot of it but hit me back with whatever ye got thanks

J.D.R

PM in bound

deepimpact

Guys, I got the barrels last Thursday. Thanks.

Do you have 280mm 6.03mm tightbores for a Cyma AKs74u?

walks86

hey guys,

just wondering how much for a guarder clear hop rubber posted to dublin (snail mail)

and how long are your 7.4 Lipos? (need to see if it will fit in the stock tube on my gun!)

elDiablo79

alri lads i know ur up 2ur balls wit the move but just wondering did you get my PM? cheers.

TNTQ

scanlant wrote: »

Guys, I got the barrels last Thursday. Thanks.

Do you have 280mm 6.03mm tightbores for a Cyma AKs74u?

Will make you one:)

walks86 wrote: »

hey guys,

just wondering how much for a guarder clear hop rubber posted to dublin (snail mail)

and how long are your 7.4 Lipos? (need to see if it will fit in the stock tube on my gun!)

10 for HP rubber posted. Don't have any 7.4v lipos left at the moment, but they fit in most of the stock tubes. What make of the gun do you have?

Leftyflip

Hey Cha, any answer to that text?;)

walks86

hey guys 2 more quick questions for you.....

a mate would like to know how much to get one of these made with and AFG instead of the vertical foregrip



and also im looking to get a pistol, got any interesting ones (Co2) in ?

GarethQ

Whats the cheapest you can do for a TB for a CA M15A4?

TNTQ

GarethQ wrote: »

Whats the cheapest you can do for a TB for a CA M15A4?

http://tntquality.com/index.php?main_page=product_info&cPath=11_84_61&products_id=233

E27 mate

TNTQ

Sneaky peaky

TNTQ

TNTQ

walks86 wrote: »

hey guys 2 more quick questions for you.....

a mate would like to know how much to get one of these made with and AFG instead of the vertical foregrip

What sort of internals? Standard, Crazy or Super Crazy?

Leftyflip

Looks well lads

deepimpact

TNTQ wrote: »

Will make you one:)

That's perfect. I need to confirm the length of the inner barrel first before I order, a number of sources indicate varying barrel lengths.

I know you guys are up to your eyeballs in the move (looks good btw), but do you have an AB mosfet in any of the boxes? Cheers.