JG-Bar 10

swiftblade

Anybody know how to get the barrel cap off this thing so i can take out the inner barrel? Have been trying with no luck.

Thanks guys

Firekitten

You should have a white tool with the gun, a tube with a thicker bit, insert to barrel 'hole' and twist. Job done. However, you'll have a job getting the barrel and hop out of the end as it narrows down towards the muzzle.

Take reciver and barrel out of the stock. Unscrew the hop ajustment arm from the hopup. Unscrew the screw directly under the reciver where the barrel meets it, twist barrel off (it unscrews from the reciver) and slide hopup and barrel out of that end.

swiftblade

Firekitten wrote: »

You should have a white tool with the gun, a tube with a thicker bit, insert to barrel 'hole' and twist. Job done. However, you'll have a job getting the barrel and hop out of the end as it narrows down towards the muzzle.

Take reciver and barrel out of the stock. Unscrew the hop ajustment arm from the hopup. Unscrew the screw directly under the reciver where the barrel meets it, twist barrel off (it unscrews from the reciver) and slide hopup and barrel out of that end.

Don't have that tool Was bought second hand. But will do what you said.

Thanks :)

swiftblade

Never mind New rubber now in.

goblin59

dont think i ever got that tool myself when i bought the bar-10 ages ago. extremely reliable rifle though, good choice at getting one.

Firekitten

Ive had a vsr and bar 10, and it came in the bag with the allen keys for both

swiftblade

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=652&category_id=69&manufacturer_id=0&option=com_virtuemart&Itemid=26

Will this fit in a G-Spec? Will it pertrude into the siliencer. Do you have to buy a different barrel cap?

Firekitten

Not sure... never had the gspec variant... if it does, you could just widen the opening a bit, take a few mm out of the material to make it fit?

swiftblade

Firekitten wrote: »

Not sure... never had the gspec variant... if it does, you could just widen the opening a bit, take a few mm out of the material to make it fit?

Yea. Im getting good results as is with the stock barrel. Would want to make a good difference for that price.

Thanks

Firekitten

oh the barrel will make a deffinate difference to it. TKs in Vsrs at 1j are lovely.