Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Help with a Samsung LCD needed.

  • 11-10-2011 8:36pm
    #1
    Registered Users, Registered Users 2 Posts: 112 ✭✭


    I have a Samsung LCD LE22S86BD, I was putting the wall bracket on the tv and one of the screws was too long. So it shorted one of the twisted pair cables going the display. Now the screen is stuck on standby.

    This must be some safety mode as there was no sparks, smoke smell etc.... Any help appreciated


Comments

  • Registered Users, Registered Users 2 Posts: 81 ✭✭themonic


    Hi, first you have to replace damaged cable and see is it works. If not I will bet that TCON board is damaged. Upload some pictures.
    Bad news- there is no safety mode in this case.


  • Registered Users, Registered Users 2 Posts: 350 ✭✭tommyh1977


    themonic wrote: »
    Hi, first you have to replace damaged cable and see is it works. If not I will bet that TCON board is damaged. Upload some pictures.
    Bad news- there is no safety mode in this case.

    +1 on the Tcon i'm afraid


Advertisement