General Discussion on Vendors, Devices etc.

JH_raheny

Aspire Nautilus Mini or Aspire Maxi would be my suggestions, both can be had with either BDC or BVC coils, personally I would go with BVC ones

Shinobollo

irishsid wrote: »

One month smoke free today! Thanks for helping me get set up !

I upgraded the battery to a spinner 2, now I'm looking for a good tank. Preferably single coil, or can take the single coils I've already bought. And nothing massive, something that wouldn't look out of place oen my spare ego batteries..

Any suggestions? Been looking at the natilis and kanger minis but they seem to have some wired coils.

The Nautilus Mini is a great tank and will look fine on your spinner. Unfortunately it won't take coils from a H2 if that's what you have. They look more like Kanger coils but I'm not sure if they're interchangeable.
Unless you've stockpiled a s#itload of coils, you could treat yourself to the Nautilus from all the money you've saved and keep the h2 as a backup 😉

irishsid

I actually ended up going with an aerotank. I needed something that held a bit more liquid and actually looks very nice.
I'll keep the h2 for going to the pub, so the coils won't go to waste.

pueblo

First day using the istick and really liking it, more than enough power for my vaping needs and it's size plus the 2200 mAh battery makes it great for taking out and about.

Now to search for a smaller tank

J Mysterio

Jealousy! How much did that set you back/ where'd you get it!?

pueblo

J Mysterio wrote: »

Jealousy! How much did that set you back/ where'd you get it!?

€42 from esmokeireland.eu

RossFixxxed

pueblo wrote: »

€42 from esmokeireland.eu

For the lazy:

http://www.e-smokeireland.eu/product-p/istick.htm

EGriff

RossFixxxed wrote: »

For the lazy:

http://www.e-smokeireland.eu/product-p/istick.htm

It's out of stock there and everywhere else as far as I can see. Bargainvapour and vaperus too.

J Mysterio

Can anyone reccommend a mech mod with a side fire button? Im looking for one that's small or that I can put into 1350 mode.

I would also be happy with a vv/vw if its small aswell.

I want something that can take my Kayfun Lite+ V2 flush but maintain a small form factor.

Had the iStick been in stock I may have plumped for that (though it obviously wouldnt hold a Kayfun well).

I've never had a mech mod. Started with an Ego previously and have an MVP 2 now.

DirtyBollox

look up a kamry k100.

http://www.e-smokeireland.eu/product-p/k100.htm

Can be shortened and lengthened depending on whether or not its an 18350 or an 18650. Bottom button firing instead of side firing but the lock mechanism is very solid.

This is side firing and is telescopic too.

http://www.e-smokeireland.eu/product-p/mkbts.htm

EGriff

What about a kato box clone: http://www.fasttech.com/products/0/10009434/1834000-kato-styled-18650-mechanical-mod

Can't find it on an irish site, ebay have some though. Takes an 18650 but should still be pretty short with a kayfun lite in there.

J Mysterio

DirtyBollox wrote: »

look up a kamry k100.

http://www.e-smokeireland.eu/product-p/k100.htm

Can be shortened and lengthened depending on whether or not its an 18350 or an 18650. Bottom button firing instead of side firing but the lock mechanism is very solid.

This is side firing and is telescopic too.

http://www.e-smokeireland.eu/product-p/mkbts.htm

Hey. Thanks for the suggestions. Just aesthetically though, not a fan of either tbh. Cheers

J Mysterio

EGriff wrote: »

What about a kato box clone: http://www.fasttech.com/products/0/10009434/1834000-kato-styled-18650-mechanical-mod

Can't find it on an irish site, ebay have some though. Takes an 18650 but should still be pretty short with a kayfun lite in there.

Yeah, I did see this on FT yesterday and took a screenshot. Kinda cool looking but not sure what would fit in that side passage...

Ionised

J Mysterio wrote: »

Can anyone reccommend a mech mod with a side fire button? Im looking for one that's small or that I can put into 1350 mode.

I would also be happy with a vv/vw if its small aswell.

I want something that can take my Kayfun Lite+ V2 flush but maintain a small form factor.

Had the iStick been in stock I may have plumped for that (though it obviously wouldnt hold a Kayfun well).

I've never had a mech mod. Started with an Ego previously and have an MVP 2 now.

I have a Dingo that looks a treat with a Kayfun and takes either an 18350 or 18500 with a side switch. Photo below.
Feel free to make an offer..I don't want silly money as I also have a Roller so the Dingo has been sidelined. Link to Atmizoo

EGriff

J Mysterio wrote: »

Yeah, I did see this on FT yesterday and took a screenshot. Kinda cool looking but not sure what would fit in that side passage...

It will take anything 22mm, so kayfun, taifun, squape, nautilius, aerotank mega. Anything designed to go on a 22mm mech mod.

youdipstick

J Mysterio wrote: »

Yeah, I did see this on FT yesterday and took a screenshot. Kinda cool looking but not sure what would fit in that side passage...

I received my Kato clone from M-Vapes UK,beautifully finished,cost 50 quid & a tenner for signed postage,put my kayfun in & firing like a gooden.

J Mysterio

Ionised wrote: »

I have a Dingo that looks a treat with a Kayfun and takes either an 18350 or 18500 with a side switch. Photo below.
Feel free to make an offer..I don't want silly money as I also have a Roller so the Dingo has been sidelined. Link to Atmizoo

Thanks, though will have to think on it. Looks good alright.

J Mysterio

youdipstick wrote: »

I received my Kato clone from M-Vapes UK,beautifully finished,cost 50 quid & a tenner for signed postage,put my kayfun in & firing like a gooden.

Thanks for mentioning M Vapes - just visited their page. The Kato looks awesome! Very tempting... will be giving serious consideration to it over next few days. Parcel motel would be an option for delivery too...

J Mysterio

I just ordered the Kato Box Mod (without the logo) from FastTech. €39!

Fratton Fred

Looks like Vaperus have the istick in stock if any one is looking.

youdipstick

Fratton Fred wrote: »

Looks like Vaperus have the istick in stock if any one is looking.

Thanks for the heads up,just ordered my 3rd istick.

I see vapingtwisted was showing a very small 20w with built in 5ml tank...

https://www.youtube.com/watch?v=ICW7CSm1e4A&list=UUgPR3trFb_fZbRADdcsMbfQ

jousting with chairs

That looks great,another thing for the wishlist.

dball

http://www.lidl.ie/en/Offers.htm?action=showDetail&id=14150

Powerfix® Precision Magnifying Glass with LED Lamp
next week in lidll

Neil_Sedaka

dball wrote: »

http://www.lidl.ie/en/Offers.htm?action=showDetail&id=14150

Powerfix® Precision Magnifying Glass with LED Lamp
next week in lidll

Damn, I was expecting lidl.ie/iStick

jousting with chairs

Neil_Sedaka wrote: »

Damn, I was expecting lidl.ie/iStick

Only a matter of time :P

dball

jousting with chairs wrote: »

Only a matter of time :P

id say they might start with some batteries first to see what the take up is like

youdipstick

I had 2ml of juice leak from my atty directly through the 510 connection on my IPV2.
I saw the juice on the table which came through the vent holes on the bottom,I wiped the juice from the vent holes & took off the leaking atty & the next morning it was wet again,I wiped it dry again,it took about 3 days for the juice to run through the mod,I also opened up the mod to see if there was any juice in with the batteries or circuitry,it was bone dry.
So there must be a channel from the 510 to the bottom vents for such leakages,so I was happy :D:D:D

youdipstick

The IPV3 looks a bad buy,check out this video,especially at the middle part

https://www.youtube.com/watch?v=1oOHU-IxP5A&list=UUzTzjQ6Wobn42VFHL4yUDRg

jousting with chairs

Lmao,he's totally afraid of it.

It looks good though,I have the 150w T8 on pre-order and it should ship around the 28th.Gonna have some fun with that bad boy

youdipstick

jousting with chairs wrote: »

Lmao,he's totally afraid of it.

It looks good though,I have the 150w T8 on pre-order and it should ship around the 28th.Gonna have some fun with that bad boy

Ha Ha !! Looked like he **** his pants....:D:D

I like the Clouper software,I am still looking for reviews on the T8.