Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Onkyo tr606 hdmi issue

  • 13-02-2012 10:24pm
    #1
    paulbok
    Registered Users, Registered Users 2 Posts: 4,992 ✭✭✭


    I have a problem with my pc hdmi input to the amp. I've checked the 4 input slots and the cables and other sources work fine in all slots.
    However the pc input will show the picture while booting up to the microsoft xp logo and then it decides "mode not supported", regardless of slot.:(
    Amp is 4 years old and got the caps replaced last year, so is it likely they are going/gone on the hdmi board again?


Comments

  • #2
    mossym
    Moderators, Sports Moderators Posts: 8,766 Mod ✭✭✭✭mossym


    what output resolution have you set on the pc?


  • #3
    paulbok
    Registered Users, Registered Users 2 Posts: 4,992 ✭✭✭paulbok


    Can't remember, it's been a year since I set it. Been working fine until a week ago.


  • #4
    mossym
    Moderators, Sports Moderators Posts: 8,766 Mod ✭✭✭✭mossym


    try setting the output resolution to 1280*720 @50Hz and see if it works


  • #5
    paulbok
    Registered Users, Registered Users 2 Posts: 4,992 ✭✭✭paulbok


    Right, had to borrow a monitor so I could see the pc so only getting to this now.
    res was at 1068 * 768
    I've tried several settings and custom settings but still get no picture (inc 1280*720 @50hz)
    I do get the windows start up logo when I switch it on.

    I have the hdmi cable going directly from pc to tv so the amp isn't the problem.
    The hdmi cabel is sound. The only thing left to check there is the dvi- hdmi adaptor.

    I have a dvi - 15pin adaptor to connect to a pc monitor and it works fine.
    I also done a system restore to before when the problem started.

    I wonder if it's worth changing the video card to a hdmi output, but I'm guessing I'll still have the same issues with resolution.

    Any ideas would be welcome.


Advertisement