Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Part guarding a HKC secure watch alarm

  • 27-02-2012 1:27pm
    #1
    mick111112
    Registered Users, Registered Users 2 Posts: 75 ✭✭


    My friend has a HKC secure watch alarm SW812/SW1212 (not sure of the model) and he wants to set up a part guard on it. The house is a bungalow and what he wants to happen is that when he sets part guard A the PIR in his bedroom is inhibited and the pir in the spare bedroom and the hall if activated will cause the alarm to beep for 30 seconds or until the code is entered to disarm the alarm and if no code entered the system will go into alarm. Just wondering is this possible we have the engineering code and the manual. Also wondering where do you connect in the tamper for the internal siren back at the alarm panel. Thanks.


Comments

  • #2
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    In engineer goto zone options for each zone and turn on or off for Partset A and Partset B


  • #3
    altor
    Registered Users, Registered Users 2 Posts: 11,756 ✭✭✭✭altor


    mick111112 wrote: »
    My friend has a HKC secure watch alarm SW812/SW1212 (not sure of the model) and he wants to set up a part guard on it. The house is a bungalow and what he wants to happen is that when he sets part guard A the PIR in his bedroom is inhibited and the pir in the spare bedroom and the hall if activated will cause the alarm to beep for 30 seconds or until the code is entered to disarm the alarm and if no code entered the system will go into alarm. Just wondering is this possible we have the engineering code and the manual. Also wondering where do you connect in the tamper for the internal siren back at the alarm panel. Thanks.

    If you go into zone types the PIR can be set up for entry/exit to have the beeps when you walk in front of the PIR with the system armed. There are two part guards on the system so he should utilize both to save having to set or inhibit from the keypad. This is set up in the zone options. The internal siren can be connected in series with the tamper return off the external bell or if there is a zone free it can be tampered in in the tamper terminals.

    www.altor.ie



  • #4
    KoolKid
    Moderators, Home & Garden Moderators, Technology & Internet Moderators Posts: 24,789 Mod ✭✭✭✭KoolKid


    PiR should be programmed as Alarm not Entry Exit. If you want PiR on with an entry time for part set then programme that zone option for Access & set up Access to Entry exit in Part Set.


Advertisement