Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Asrock Z77 Extreme4 Debugger - Need Help!!

  • 15-07-2012 03:48PM
    #1
    ZeroThreat
    Registered Users, Registered Users 2 Posts: 2,314 ✭✭✭


    Originally posted this http://www.boards.ie/vbulletin/forumdisplay.php?f=842 on the off-topic thread, but I probably have a better chance of more responses as a seperate thread

    Well, I made sure everything was connected, & turned on pc today. The Asrock splash screen appears briefly (using a Z77 Extreme4), then the standard black screen shoing bios date, the mobo type, cpu type & speed & total ram, followed by :

    "UEFI Defaults have been loaded.
    Press F2 or DEL to Run Setup
    Press F1 to continue"

    Obviously I'm posting this as f2, del, or f1 don't seem to do anything.
    I checked out the Dr. Debug Led display on the motherboard & I get the code A2 - which according the manual means 'IDE Detect'. Pretty strange since I don't have any IDE devices to the best of my knowledge.

    The only Sata drives I have connected are the SSD & DVD drive, & I checked they're both securly connected.

    Any ideas?confused.gif


Advertisement