If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

central heating

mick o brien · 2012-08-21 21:45:27

hi, i recently fitted a stove with boiler in my sons bungalow, there was existing heating oil fired, i seem to have done everything right, in tapping in to the old system, fitting flap non return valve on the return to the stove, but as soon as the water starts to get very hot it blows steam up the expansion pipe and…

Options

21-08-2012 10:45pm

#1

mick o brien

Registered Users Posts: 1 ✭

Join Date: August 2012

Posts: 0

hi, i recently fitted a stove with boiler in my sons bungalow, there was existing heating oil fired, i seem to have done everything right, in tapping in to the old system, fitting flap non return valve on the return to the stove, but as soon as the water starts to get very hot it blows steam up the expansion pipe and dosent seem to travel through the cylinder coil, i've tried venting, i'm lost, mick:(

0

Comments

Options
#2 21-08-2012 10:51pm
Spear

Moderators, Computer Games Moderators, Technology & Internet Moderators, Help & Feedback Category Moderators Posts: 25,306 CMod ✭✭✭✭

Join Date: September 2001

Posts: 22865

try the heating forum instead:

http://www.boards.ie/vbulletin/forumdisplay.php?f=1320

0