Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Nead help wiring ALARM Galaxy 2-12

Options
  • 02-09-2012 8:41am
    #1
    Registered Users Posts: 5


    Hi all, i need help wiring alarm ,can someone please advise me :
    i using: G2-12 panel (C012-01-C), MK7 LCD keyprox (CP038-01),Honeywell 8IR103 PIR Motion Detector and ADE Honeywell AG6 Intellisense Activeguard Bellbox .My house wired with 6 core cable, i start wiring from pir's like this :
    111.jpg
    with system came resistors :
    dsc01110.jpg
    i using blue one pir's .Do i wiring them correctly ?
    I have two doors contact's :
    dsc01111.jpg
    One with temper, and one without. How to wire them correctly ?
    My external bell and keypad looks like this :
    dsc01112.jpg
    dsc01113.jpg
    How to wire them correctly ? Do i need use any resistors ?
    THANKS.


Comments

  • Registered Users Posts: 2,062 ✭✭✭Jnealon


    The galaxy is not a diy friendly panel. The alarm relay should be in parallel with the resistor and the tamper in series
    680ohm resistor across the ab terminals on the keypad
    All this is in the installer manual, you need to familiarise yourself with it


  • Registered Users Posts: 5 Alone3000


    Thanks for reply ,i start slowly wiring my system. like this :
    Pir :
    byme10.jpg

    Door contact :

    door10.jpg

    Door contact with temper and without wiring the same ?

    External bell :

    bell2s10.jpg

    Do i wiring OK so far ?

    I have couple extra questions, do i need put resistors on zones if they not in use as i need only 8 zones ?

    zones_10.jpg

    And how to connect phone socket to get prior line . I thought connect to L1 and L2, but my other phone socket using them. I download master socket manual from net and they showing connection to be made in (IN - OUT) place and pull out two resistors marked (al),is that right? .And do line need to have filter to not interfere with broadband?

    310.jpg

    112.jpg

    410.jpg

    Thanks.


  • Registered Users Posts: 2,062 ✭✭✭Jnealon


    The zones on the galaxy can be set up as non eol, might be easier.
    You're using two different contacts, a grade 1 and a grade 2 both will have different connections


  • Registered Users Posts: 1 jlambe1


    Hi, to wire the keypad you should use data cable or 4,6,8 cores.

    Red +
    Black -
    A - white
    B - Black

    You must put the EOL resistor (brown one) between A and B.

    If you have 2 keypads don't worry about the EOL but follow instructions below,

    Red +
    Black -
    A - White and Green
    B - Black and Black.

    Hope it helps.


  • Registered Users Posts: 5 Alone3000


    Thanks Jnealon and jlambe1 for replays .


  • Advertisement
Advertisement