Well MB-06 bolt problem

AllyBushell

I bought a Well MB-06 from taiwangun.com and it arrived on friday 3rd of may.. today (6th may) I was at a skirmish this morning, and when I took the gun out of the box, the bolt literally slid out.. The bolt does have a thread at the end of it, and I was wondering how to fix it.. Thank you for any reply!

-Alan

andy_g

pop it back in and look in the trigger guard theres a latch push it up an it will lock it in

AllyBushell

whereabouts is the latch??

AllyBushell

i think its the thing that catches the spring, its really easy to pull back

T4RGET

the latch that andy is referring to (I think) should be located in the body, in the trigger guard usually. It keeps the bolt from sliding out. like he said, you'll have to look for it and hope you haven't lost it although it's not exactly a small piece

AllyBushell

I have the gun apart, is it like a cuboid of metal with two holes?? and if so, is there supposed to be a pin holding it up?? This is pretty much what i have (the part with the small bump at the top goes nowhere near that high) http://www.google.ie/imgres?safe=off&hl=en&authuser=0&biw=1366&bih=643&tbm=isch&tbnid=exrlOi4vyQZ4CM:&imgrefurl=http://www.jokersofairsoft.ie/index.php%3Fmain_page%3Dindex%26cPath%3D21_84&docid=8dU7ktoOYQJwSM&imgurl=http://www.jokersofairsoft.ie/images/l96%252520trigger.jpg&w=900&h=602&ei=f_eHUfeADqWP7Aaw2YHwBA&zoom=1&ved=1t:3588,r:3,s:0,i:89&iact=rc&dur=1110&page=1&tbnh=162&tbnw=189&start=0&ndsp=15&tx=94&ty=50

andy_g

yeah its the one to the right

AllyBushell

thanks guys, I got it.. took a bit off a hanger and stuck it in so it cant go down!cheers!

brenak47

U shouldn't have to pin it into place once pushed up it shouldn't move as it locks itself behind the spring. If it still keeps falling it it might be the spring not able to hold it. I replaced my spring the other day with one slightly shorter than the one in it and that latch wouldn't stay in place. I but back in my old spring and no problems with it since. check if the spring was cut to reduce the power below a joule or just a weaker spring put in. Hope this is of some help.