Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

G&G RAIDER

  • 03-08-2013 1:22am
    #1
    brenak47
    Closed Accounts Posts: 1,446 ✭✭✭


    I have a raider and when shooting single shot it sounds and runs fine. When i change to burst/full auto it sound crap and that its about to **** itself.I had it serviced recently so all should be fine there(hopefully) so would it be down to the motor.I run a 9.6v nunchuck battery and the motor is still standard.


Comments

  • #2
    Untamedlemon
    Registered Users, Registered Users 2 Posts: 529 ✭✭✭Untamedlemon


    brenak47 wrote: »
    I have a raider and when shooting single shot it sounds and runs fine. When i change to burst/full auto it sound crap and that its about to **** itself.I had it serviced recently so all should be fine there(hopefully) so would it be down to the motor.I run a 9.6v nunchuck battery and the motor is still standard.

    G&G motors aren't great so I'd say that's your problem. Before you go out buying a new motor try get a lend of a motor or if you have a different motor try that first just so you can rule out any other problems. If you don't have another motor just take out the g&g motor and try running it. I had a similar problem to this and my g&g motor was to blame.
    Hope this helps.


  • #3
    AirsoftEire.com
    Registered Users, Registered Users 2 Posts: 769 ✭✭✭AirsoftEire.com


    What was performed during the service? The motor could have been incorrectly installed against the wiriing. The motor height could also be incorrect.

    G&G Raider motors weren't great over 18 months ago, but are near perfect since.


  • #4
    Untamedlemon
    Registered Users, Registered Users 2 Posts: 529 ✭✭✭Untamedlemon


    AirsoftEire.com wrote: »
    What was performed during the service? The motor could have been incorrectly installed against the wiriing. The motor height could also be incorrect.

    G&G Raider motors weren't great over 18 months ago, but are near perfect since.

    Bought mine just over a year ago and it broke during the Christmas holidays and i didnt put too much strain on it. It could be caused by the motor height not being correct but I'd check the motor as well just to be sure.


  • #5
    brenak47
    Closed Accounts Posts: 1,446 ✭✭✭brenak47


    Service was gust a grease up and 1 or 2 shims done i think a friend did it. I have put a g27 grip on it and it was tricky to get the motor height just right but it had this problem before i changed grip.One minute is would sound fine next it just sounds crap.I have heard the raider motor wasn't the best.Think i will try get a loan of a motor and take from there.Rule things out one at a time.Thanks lads.


  • #6
    brenak47
    Closed Accounts Posts: 1,446 ✭✭✭brenak47


    Got a high torque motor today fitted it and all sounds alot better hopefully thats all it was.Thanks lads for the replys fair play to ye appreciate it.


  • Advertisement
Advertisement