firmware upgrdea for Europlex 3725-300 and Europlex 3725-200

max2013

Hi

I was wondering were can I get the latest's firmware for both of the below panels:
Europlex 3725-300
Europlex 3725-200

was were can I get a GSM Modem (9122-009) module from?

Thanks for all your help in advance.

KoolKid

What firmware have you on the panel?
You can upgrade to 1.4 and then upgrade to Siemens SPC versions.

max2013

firmware as below:
Europlex 3725-300 v1.4b
Europlex 3725-200 v1.2c

Also is the firmware on the keypad upgradable?

KoolKid

It is once you upgrade to SPC
Are you sure the 1.2 is not a Signet 100?

max2013

Hi

That one I was going to install it this week to upgrade a visoinc system.
on the board there is a sticker on the capacitor and it does say signet 200 rev A2
and on a chip it say 1.2c P1 and same on the box. on the box it say say free pcb upgrade from 100 to 200.

Thanks

KoolKid

1.2 firmware is a Signet 100.
1.4 is the 200 and 300.

max2013

Hi

Many be on that one I many need to wait until I power it up. to make sure what version is on it.

thanks

Jnealon

max2013 wrote: »

Hi

That one I was going to install it this week to upgrade a visoinc system.
on the board there is a sticker on the capacitor and it does say signet 200 rev A2
and on a chip it say 1.2c P1 and same on the box. on the box it say say free pcb upgrade from 100 to 200.

Thanks

How old is the panel as it sounds like could be one of the Signet 200 panels that were first released back in 2007 or so. These were sold as a free upgrade as the 100 panels were not in production.
Check the warranty expiration date on the pcb

max2013

Hi

Expiration date on the pcb is 07/10

Jnealon

The panel needs to be upgraded from 1.2 to 1.3 and then on to 1.4.
For this you'll need a unique "seed key" which is generated from the panel serial number.

max2013

Hi

Thanks for the fast reply and is "seed key" easy to get?

also is it worth upgrading the Europlex 3725-200 panel to one of the below

Europlex 3725-300
SPC6330.300-L1
SPC5320.320-L1

as I wanted to use the SPCanywhere to arm and disarm the panel over Ethernet.
all the above are about the same price as the Europlex 3725-200.
also is the signet wired keypad + pace 3722 v2.03 compatible with the all the above panels?

KoolKid

You can upgrade the signet 220 or 300 to Spc as long as they have IP.
I have never needed a seed key. The is a key needed for the last Signet upgrade but that never changes as far as I know.

Jnealon

KoolKid wrote: »

You can upgrade the signet 220 or 300 to Spc as long as they have IP.
I have never needed a seed key. The is a key needed for the last Signet upgrade but that never changes as far as I know.

From 1.3 on the seed key is the same but to get up to 1.3 you need the exe file to generate the keys

KoolKid

Ahh got ya.
Easily got I'd imagine.

max2013

Hi

Which one of the below is a better panel:

Europlex 3725-300
SPC6330.300-L1
SPC5320.320-L1

KoolKid

The best panel is the 6330. A very high spec for a home though..
It's a 6000 panel with capacity for 256 zones
It has ip
And it's grade 3.

max2013

also do you if the signet wired keypad + pace 3722 will work with that panel?
also want is the latest firmware for the 6330 available?

KoolKid

If all software is upgraded to SPC then all Siemens peripherals will work, including the Spk620 comfort keypads.
The latest software for SPC panels is 3.2.5
I can send you the files if you need them.

holleymech

Hi. I am trying to get a firmware upgrade for my Europlex panel. Could you help or point me in the right direction please? I have a SPC4300 with firmware 2.1.0?

Thanks

Adam.

KoolKid

Hi
I will PM you the files. You just need to start from the next release and upgrade in sequence upto 3.4.5