If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

siemens e12 46 washing machine not spinning !

lensman · 2013-12-05 23:40:26

Evening all, I have a Siemens e12-46 washing machine which is washing & draining fine but not spinning at end of cycle, I cleared some debris from pump chamber at bottom front right & opened drain pipe which released small amount of water (1/2 pint), pump turns freely by hand but did not solve but problem, when dial is…

06-12-2013 12:40am

#1

lensman

Registered Users, Registered Users 2 Posts: 1,326 ✭✭✭

Join Date: November 2003

Posts: 1178

Evening all, I have a Siemens e12-46 washing machine which is washing & draining fine but not spinning at end of cycle, I cleared some debris from pump chamber at bottom front right & opened drain pipe which released small amount of water (1/2 pint), pump turns freely by hand but did not solve but problem, when dial is turned to spin mode a humming motor noise is evident but drum does not spin, drum turns freely by hand..no error codes are displayed, any ideas?

0

Comments

#2 06-12-2013 5:47pm

The Red Ace

Registered Users, Registered Users 2 Posts: 1,377 ✭✭✭

Join Date: February 2013

Posts: 1362

it needs a set of brushes in the main motor, clean up the comm in the armature when fitting

0
#3 06-12-2013 9:37pm

lensman

Registered Users, Registered Users 2 Posts: 1,326 ✭✭✭

Join Date: November 2003

Posts: 1178

The Red Ace wrote: »

it needs a set of brushes in the main motor, clean up the comm in the armature when fitting

Thanks M8, it actually spun today but I didn't like the sound it made as got up to 1200rmp, I'll take your advice.

0