Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
UPC Thomson TWG-870U & Technicolor TC7200 - Enabling "Cable modem" mode - basic guide
Comments
-
Hi all,
Is there any setting made available during in this procedure that would help me with Port Forwarding on my TWG-870U?
I've never been able to get mine to play nice with forwarding
Cheers
Good luck.0 -
If you type 192.168.0.1 in your browser you'll get to your routers page. Leave the user field blank but put "admin" in the password field. If you look around the menus you should find "Fowarding" somewhere. You should set your pc up to request a static ip (plenty of examples on the Internet) then forward the ports you need. Make sure your anti virus isnt blocking the ports aswell.
Good luck.
Yep, I know how to set up forwarding and have set up and configured many times. It's just I can never get it to work on this router. As far as I understand this is common on the 870.
I was hoping that there might be some more functionality unlocked with this trick0 -
Yep, I know how to set up forwarding and have set up and configured many times. It's just I can never get it to work on this router. As far as I understand this is common on the 870.
I was hoping that there might be some more functionality unlocked with this trick0 -
Try running
snmpwalk -v2c -c public 192.168.0.1 1.3.6.1.4.1.4413.2.2.2.1.7.1.1.0
should return 2.
And hopefully not an error0 -
-
Advertisement
-
Weird! UPC Ireland is suppose to use only STBA.01.50. And for that version this is the right OID.
A router power down and power up should force the upgrade.
But it's good to keep in mind that different software may have such different OIDs0 -
-
Weird! UPC Ireland is suppose to use only STBA.01.50. And for that version this is the right OID.
A router power down and power up should force the upgrade.
But it's good to keep in mind that different software may have such different OIDs
My Thomson was stuck on STB9.01.30 (Thomson Wireless PacketCable Gateway E-MTA <<HW_REV: 1.1; VENDOR: Thomson; BOOTR: 2.3.0; SW_REV: STB9.01.30; MODEL: TWG870U>>), even though it seemed everyone else was on STB9.01.36.
I have since got the EPC3925.
Here was the MIB's I had on my TWG870UIR (STB9.01.30)..
You could see if any of the MIB's below work for you. Possible one of the ones with a value of 2 would be an ideal candidate to change to value of 1.
However changing the wrong one could be very risky.1.3.6.1.2.1.69.1.3.3.0 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.3.2.0 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.7.1.1.1.1 -> 1 (i32) 1.3.6.1.4.1.1429.77.1.7.1.1.1.2 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.7.2.1.3.1.1 -> 100 (i32) 1.3.6.1.4.1.1429.77.1.7.2.1.3.1.2 -> 0 (i32) 1.3.6.1.4.1.1429.77.1.7.2.1.3.10.1 -> 0 (i32) 1.3.6.1.4.1.1429.77.1.7.2.1.3.10.2 -> 100 (i32) 1.3.6.1.4.1.1429.77.1.7.10.0 -> HEX:FF FF FF FF FF FF FF FF FF FF FF FF 1.3.6.1.4.1.1429.77.1.7.11.0 -> HEX:FF FF FF FF FF FF FF FF FF FF FF FF 1.3.6.1.4.1.1429.77.1.7.6.0 -> admin 1.3.6.1.4.1.1429.77.1.7.7.0 -> SAw3bstar!E 1.3.6.1.4.1.1429.78.1.1.0 -> 0 (i32) 1.3.6.1.4.1.1429.78.1.1001.5.0 -> 0 (i32) 1.3.6.1.4.1.1429.78.1.1001.2.0 -> HEX:80 1.3.6.1.4.1.1429.78.1.1001.3.0 -> webstar 1.3.6.1.4.1.1429.78.1.1001.4.0 -> webstar 1.3.6.1.4.1.1429.78.1.1001.1.0 -> 1 (i32) 1.3.6.1.4.1.1429.77.1.6.1.1.2.1 -> EPC2203 1.3.6.1.4.1.1429.77.1.6.1.1.6.1 -> fw/epc2203-E10-13-v202r1262-110516cs.bin 1.3.6.1.4.1.1429.77.1.6.1.1.7.1 -> 89.101.160.37 1.3.6.1.4.1.1429.77.1.6.1.1.8.1 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.6.1.1.9.1 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.6.1.1.2.2 -> EPC2425 1.3.6.1.4.1.1429.77.1.6.1.1.6.2 -> fw/epc2425-E10-5-v202r12812-111007cs_upc.bin 1.3.6.1.4.1.1429.77.1.6.1.1.7.2 -> 89.101.160.37 1.3.6.1.4.1.1429.77.1.6.1.1.8.2 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.6.1.1.9.2 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.6.1.1.2.3 -> EPC3925 1.3.6.1.4.1.1429.77.1.6.1.1.6.3 -> fw/epc3925-ESIP-12-v302r125533-110830c_upc.bin 1.3.6.1.4.1.1429.77.1.6.1.1.7.3 -> 89.101.160.37 1.3.6.1.4.1.1429.77.1.6.1.1.8.3 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.6.1.1.9.3 -> 2 (i32) 1.3.6.1.4.1.1429.77.1.3.12.0 -> SAw3bstar!E 1.3.6.1.4.1.1429.79.2.1.1.4.0 -> 139 (u32) 1.3.6.1.4.1.1429.79.2.1.1.3.0 -> 1 (i32) 1.3.6.1.4.1.1429.79.2.2.1.3.0 -> 0 (u32) 1.3.6.1.4.1.1429.79.2.3.9.1.3.0 -> 0 (i32) 1.3.6.1.4.1.1429.79.2.2.2.1.1.4.32 -> 2 (i32) 1.3.6.1.4.1.1429.79.2.2.2.1.1.4.33 -> 2 (i32) 1.3.6.1.4.1.1429.79.2.2.2.1.1.2.33 -> 2 (i32) 1.3.6.1.4.1.1429.79.2.2.1.14.0 -> 7 (i32) 1.3.6.1.4.1.1429.79.2.2.3.1.1.3.32 -> 120 (i32) 1.3.6.1.4.1.1429.79.2.2.3.1.1.3.33 -> 120 (i32) 1.3.6.1.4.1.1429.79.2.3.2.1.1.33 -> 2 (i32) 1.3.6.1.4.1.1429.79.2.2.3.1.1.1.32 -> 2 (i32) 1.3.6.1.4.1.1429.79.2.2.3.1.1.1.33 -> 2 (i32) 1.3.6.1.4.1.1429.79.2.2.3.6.1.0 -> 0 (i32) 1.3.6.1.4.1.1429.79.2.4.2.2.0 -> HEX:00 1.3.6.1.4.1.2863.78.1.1.0 -> 0 (i32) 1.3.6.1.4.1.2863.205.1.1.75.4.0 -> 1 (i32) 1.3.6.1.4.1.2863.205.1.1.75.2.0 -> webstar 1.3.6.1.4.1.2863.205.1.1.75.3.0 -> webstar 1.3.6.1.4.1.2863.205.1.1.75.5.0 -> 0 (i32) 1.3.6.1.4.1.2863.205.1.1.78.1.0 -> 1 (i32) 1.3.6.1.4.1.2863.205.1.1.78.2.0 -> 2 (i32) 1.3.6.1.4.1.2863.205.10.1.21.0 -> thomson 1.3.6.1.4.1.2863.205.10.1.22.0 -> thomson 1.3.6.1.4.1.2863.205.1.1.54.0 -> 0 (i32) 1.3.6.1.4.1.2863.205.10.1.33.3.1.8.0 -> 2 (i32) 1.3.6.1.4.1.2863.205.1.1.80.1.2.1 -> STBA 1.3.6.1.4.1.2863.205.1.1.80.1.3.1 -> TWG870U 1.3.6.1.4.1.2863.205.1.1.80.1.5.1 -> 89.101.160.37 1.3.6.1.4.1.2863.205.1.1.80.1.6.1 -> fw/TWG870U-B9.01.30-101026-F-1C1.bin 1.3.6.1.4.1.2863.205.1.1.80.1.7.1 -> 2 (i32) 1.3.6.1.4.1.2863.205.1.1.80.1.2.2 -> STB9 1.3.6.1.4.1.2863.205.1.1.80.1.3.2 -> TWG870U 1.3.6.1.4.1.2863.205.1.1.80.1.5.2 -> 89.101.160.37 1.3.6.1.4.1.2863.205.1.1.80.1.6.2 -> fw/TWG870U-B9.01.30-101026-F-1C1.bin 1.3.6.1.4.1.2863.205.1.1.80.1.7.2 -> 2 (i32) 1.3.6.1.2.1.69.1.2.1.2.1 -> 0.0.0.0 1.3.6.1.2.1.69.1.2.1.3.1 -> 0.0.0.0 1.3.6.1.2.1.69.1.2.1.4.1 -> public 1.3.6.1.2.1.69.1.2.1.5.1 -> 2 (i32) 1.3.6.1.2.1.69.1.2.1.6.1 -> @ 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32) 1.3.6.1.2.1.69.1.2.1.2.2 -> 0.0.0.0 1.3.6.1.2.1.69.1.2.1.3.2 -> 0.0.0.0 1.3.6.1.2.1.69.1.2.1.4.2 -> S7@rgu5cp3 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32) 1.3.6.1.2.1.69.1.2.1.6.2 -> HEX:C0 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32) 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32) 1.3.6.1.2.1.69.1.6.2.1.3.1 -> 0 (i32) 1.3.6.1.2.1.69.1.6.2.1.4.1 -> 1 (i32) 1.3.6.1.2.1.69.1.6.2.1.5.1 -> 2048 (i32) 1.3.6.1.2.1.69.1.6.2.1.2.1 -> 4 (i32) 1.3.6.1.2.1.69.1.6.2.1.3.2 -> 0 (i32) 1.3.6.1.2.1.69.1.6.2.1.4.2 -> 1 (i32) 1.3.6.1.2.1.69.1.6.2.1.5.2 -> 2054 (i32) 1.3.6.1.2.1.69.1.6.2.1.2.2 -> 4 (i32) 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.1 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.1 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.1 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.1 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.1 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.1 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.1 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.1 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.1 -> 17 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.1 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.1 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.1 -> 67 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.1 -> 67 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.1 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.2 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.2 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.2 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.2 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.2 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.2 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.2 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.2 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.2 -> 17 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.2 -> 67 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.2 -> 67 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.2 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.2 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.2 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.3 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.3 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.3 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.3 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.3 -> 127.0.0.1 1.3.6.1.2.1.69.1.6.4.1.8.3 -> 255.255.255.255 1.3.6.1.2.1.69.1.6.4.1.9.3 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.3 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.3 -> 256 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.3 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.3 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.3 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.3 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.3 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.4 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.4 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.4 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.4 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.4 -> 192.168.0.0 1.3.6.1.2.1.69.1.6.4.1.8.4 -> 255.255.0.0 1.3.6.1.2.1.69.1.6.4.1.9.4 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.4 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.4 -> 256 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.4 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.4 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.4 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.4 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.4 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.5 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.5 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.5 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.5 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.5 -> 172.16.0.0 1.3.6.1.2.1.69.1.6.4.1.8.5 -> 255.240.0.0 1.3.6.1.2.1.69.1.6.4.1.9.5 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.5 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.5 -> 256 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.5 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.5 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.5 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.5 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.5 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.6 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.6 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.6 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.6 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.6 -> 169.254.0.0 1.3.6.1.2.1.69.1.6.4.1.8.6 -> 255.255.0.0 1.3.6.1.2.1.69.1.6.4.1.9.6 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.6 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.6 -> 256 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.6 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.6 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.6 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.6 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.6 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.7 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.7 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.7 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.7 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.7 -> 89.101.170.0 1.3.6.1.2.1.69.1.6.4.1.8.7 -> 255.255.255.128 1.3.6.1.2.1.69.1.6.4.1.9.7 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.7 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.7 -> 6 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.7 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.7 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.7 -> 139 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.7 -> 139 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.7 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.8 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.8 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.8 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.8 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.8 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.8 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.8 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.8 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.8 -> 6 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.8 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.8 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.8 -> 137 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.8 -> 139 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.8 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.9 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.9 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.9 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.9 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.9 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.9 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.9 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.9 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.9 -> 17 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.9 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.9 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.9 -> 137 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.9 -> 139 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.9 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.10 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.10 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.10 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.10 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.10 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.10 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.10 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.10 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.10 -> 6 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.10 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.10 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.10 -> 135 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.10 -> 135 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.10 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.11 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.11 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.11 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.11 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.11 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.11 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.11 -> 10.0.0.0 1.3.6.1.2.1.69.1.6.4.1.10.11 -> 255.0.0.0 1.3.6.1.2.1.69.1.6.4.1.11.11 -> 256 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.11 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.11 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.11 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.11 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.11 -> 4 (i32) 1.3.6.1.2.1.69.1.6.4.1.3.12 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.4.12 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.5.12 -> 1 (i32) 1.3.6.1.2.1.69.1.6.4.1.6.12 -> 2 (i32) 1.3.6.1.2.1.69.1.6.4.1.7.12 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.8.12 -> 0.0.0.0 1.3.6.1.2.1.69.1.6.4.1.9.12 -> 89.101.160.32 1.3.6.1.2.1.69.1.6.4.1.10.12 -> 255.255.255.224 1.3.6.1.2.1.69.1.6.4.1.11.12 -> 17 (i32) 1.3.6.1.2.1.69.1.6.4.1.12.12 -> 0 (i32) 1.3.6.1.2.1.69.1.6.4.1.13.12 -> 65535 (i32) 1.3.6.1.2.1.69.1.6.4.1.14.12 -> 69 (i32) 1.3.6.1.2.1.69.1.6.4.1.15.12 -> 69 (i32) 1.3.6.1.2.1.69.1.6.4.1.2.12 -> 4 (i32)
Lots of juicy passwords in there. You can also map some of the MIBs to http://docsis.org/node/360
"S7@rgu5cp3" seems to be another SNMP community string along with "public"
webstar/webstar is the telnet login credentials which is listening on 192.168.100.10 -
Progress, but no dice.
I was doing it wrong™. I wasn't doing a full SNMP walk so the latter ..4413.. OIDs weren't being returned (there's actually closer to 2k objects). Now I can get them all. However, the OP's OID still doesn't exist.# snmpwalk -v2c -c public 192.168.21.1 .1.3.6.1.4.1.4413.2.2.2.1.7 iso.3.6.1.4.1.4413.2.2.2.1.7.1.2.0 = INTEGER: 2 iso.3.6.1.4.1.4413.2.2.2.1.7.1.3.0 = INTEGER: 2 iso.3.6.1.4.1.4413.2.2.2.1.7.1.4.0 = INTEGER: 5
(Ignore the different IP, I've changed mine in web ui).
So either ..7.1.1.0 is disabled from public view (hinted in in post #6), or my modem being stuck on STB9.01.30 (after numerous hard, and soft, reboots). Or, of course, I could well be still doing it wrong™.
Any way to force a firmware upgrade?0 -
Progress, but no dice.
I was doing it wrong™. I wasn't doing a full SNMP walk so the latter ..4413.. OIDs weren't being returned (there's actually closer to 2k objects). Now I can get them all. However, the OP's OID still doesn't exist.# snmpwalk -v2c -c public 192.168.21.1 .1.3.6.1.4.1.4413.2.2.2.1.7 iso.3.6.1.4.1.4413.2.2.2.1.7.1.2.0 = INTEGER: 2 iso.3.6.1.4.1.4413.2.2.2.1.7.1.3.0 = INTEGER: 2 iso.3.6.1.4.1.4413.2.2.2.1.7.1.4.0 = INTEGER: 5
(Ignore the different IP, I've changed mine in web ui).
So either ..7.1.1.0 is disabled from public view (hinted in in post #6), or my modem being stuck on STB9.01.30 (after numerous hard, and soft, reboots). Or, of course, I could well be still doing it wrong™.
Any way to force a firmware upgrade?
JTAG I'm afraid, however you would need someone to give you the 1.50 flash.
Let me pull out the list of web pages on the EPC3925 firmware, there may be a hidden one for firmware upgrades that possibly is similar to the TWG870. I know many webpage names are common to both already. Most DOCSIS scientific atlanta, cisco, webstar, thomson and others use same chipset and the firmwares are all very similar or the same. Mainly eCos based.0 -
Advertisement
-
white_westie wrote: »No got nothing at all.
Status (bottom) line just shows host addr, Standby, Not Responding, No data from CMTS, No data from CMTS, Polling ON.
Did notice when I startup, it takes a few seconds to populate the status line - suspect it's timing out.
Will post if I get any further.
Would be nice if UPC just upgraded the firmware to the same version as used in The Netherlands!
WW
Eventually was allowed to look at this again, and by switching off firewall on tc7200 I could connect with the tool 'MIB Browser' and see everything.
Reluctant to attempt to change this without a rollback option - does a factory reset not restore it back to defaults?
Also wondering does the phone still work after it is switched to bridge mode?
Due to pending exams with others in house, cannot afford to risk changing it at the moment.
WW0 -
Here is some links present in firmware:
/Administration.htm /AdvancedWSettings.htm /adv_dhcp.asp /adv_index.html /adv_interfaces.asp /adv_prod.asp /adv_qos.asp /AppGaming.htm /ARARPTable.htm /_aslvl.asp /Backup.htm /cgi_lang.en /change_paswd.htm /Channel /ChannelsSelection.htm /cisco_logo.png /control?WFAWLANConfig /CoreDeviceService /CoreDeviceService.xml /DHCPClientTable.htm /DHCPReservation2.htm /DHCPReservation3.htm /DHCPReservation4.htm /DHCPReservation.htm /Diagnostics.htm /disabled.html /_dlcert.asp /_dlcert_inprocess.asp /DloadVirus.asp /DMZ.htm /Docsis_log.htm /Docsis_signal.htm /Docsis_speed.htm /Docsis_status.htm /Docsis_system.htm /DprSetup.asp /EditList.htm /emta.asp /EMTA_Log.htm /EMTA_Log_line_diag_1.htm /err_msg /err_msg.en /event?WFAWLANConfig /Factorydefaults.htm /filename.gwc /FirmwareUpgrade.htm /FixedCPEIpAssignment.htm /fw_version.pat /goform /goform/ /goform/Backup /goform/RemoteProvision /gscan.asp /help/h_AccessRes.htm /help/h_AdvRouting.htm /help/h_AdvWSettings.htm /help/h_Backup.htm /help/h_BasicRules.htm /help/h_BasicWSettings.htm /help/h_DDNS.htm /help/h_Diagnostics.htm /help/h_DMZ.htm /help/h_dsl_status.htm /help/h_FDefaults.htm /help/h_Firewall.htm /help/h_FUpgrade.htm /help/h_Gateway.htm /help/h_IPFiltering.htm /help/h_Language.htm /help/h_LocalLog.htm /help/h_LocalNetwork.htm /help/h_Log.htm /help/h_MACClone.htm /help/h_MACFilter.htm /help/h_Management.htm /help/h_PForwarding.htm /help/h_PTriggering.htm /help/h_qos.htm /help/h_QuickSetup.htm /help/h_Router.htm /help/h_Setup.htm /help/h_SPForwarding.htm /help/h_ToD.htm /help/h_UserSetup.htm /help/h_VPN.htm /help/h_VPNmn.htm /help/h_WDS.htm /help/h_WMACFilter.htm /help/h_WNetwork.htm /help/h_WSecurity.htm /HiddenSpeed.htm /HNAP1/ /index.htm /index.html /index_l.html /kbs.htc /LanSetup.htm /Layer3Forwarding /Layer3Forwarding.xml /LineDiag_1.asp LineDiag_1.asp /LineDiag_2.asp /LineDiag_3.asp /LineDiag.asp LineDiag.asp /LineDiag_index.asp /LocalNetwork.htm /_lockdown.asp /log.asp /log_data.htm /Log.htm /login_cont.htm /login_faile.htm /login.htm /logout.htm lRgConnect.asp /MTA_Batt.htm /MtaDhcp.asp /MtaEventLog.asp /MTA_EvtLog.htm /MTA_Parameters.htm /MtaProvisioning.asp /MtaQos.asp /MtaStatus.asp /MTA_Status.htm /Ping.htm /popup.htm /PortRangeTriggering.htm /provsip.asp /public/ /public/RgParentalPassword.asp /public/RgUserLogin.asp /QosDevice /QosDevice.xml /QoS.htm /QosManager /QosManager.xml /QosPolicyHolder /QosPolicyHolder.xml /Quick_setup.htm /reboot_guage.htm /RemoteProvision.asp /reset.asp /restart.asp /RgConnect.asp RgConnect.asp /RgContentFilter.asp /RgDdns.asp /RgDhcp.asp /RgDiagnostics.asp /RgDmzHost.asp /RgEventLog.asp /RgFirewallEL.asp /RgFirewallRL.asp /RgFixedIp.asp /RgForwarding.asp /RgIpFiltering.asp /RgIpFiltering.htm /RgMacFiltering.asp /RgMacFiltering.htm /RgOptions.asp /RgParentalAdvanced.asp /RgParentalBasic.asp /RgParentalBasic.htm /RgParentalEL.asp /RgParentalEL.htm /RgParentalInterPage.asp /RgParentalPassword.asp /RgPassThroughSetting.asp /RgPortFiltering.asp /RgPortTriggering.asp /RgRipSetup.asp /RgSaveConfiguration.asp /RgSecurity.asp /RgSetup.asp /RgSwInfo.asp /RgTime.asp /RgTodFilter.asp /RgTodFilter.htm /RgUserLogin.asp /RgUserSetup.asp /RgUserSetup.htm /RgVpnBasic.asp /RgVpnConfigure.asp /RgVpnEventLog.asp /RgVpnL2tpPptp.htm /Routing_Table.htm %s.asp /Security.htm /SetTime.asp /Setup_DDNS.htm /Setup_routing.htm /signal.asp /SingleForwarding.htm /sipauth.asp /SipAuth.htm /SIP.htm /softupgrade.asp /ssh /status.asp /Status.htm /Summary.htm /__swdld_inprocess.asp /system.asp /techsupport.asp /vpn_adv.htm /vpn_main.htm /VPNPassthrough.htm /vpnsum.htm /WANCommonInterfaceConfig /WANCommonInterfaceConfig.xml /WANIPConnection /WANIPConnection.xml /WClientMACList.htm /WDS.htm /webstar.html /webstar_l.html /WFADevice.xml /Wireless.htm /wlanAccess.asp /wlanAdvanced.asp /wlanBridging.asp /wlanGuestNetwork.asp /wlanPrimaryNetwork.asp /wlanRadio.asp /wlanSesPopup.asp /wlanWmm.asp /wlanWps.asp /WMACFilter.htm /WMultissid.htm /WNetwork.htm /WSecurity.htm /x_wfawlanconfig.xml
0 -
After doing this can you type 192.168.0.1 to get into the Thomson or is it not accessible anymore after you do it?
- Never mind, the address changes to 192.168.100.1 .0 -
Thanks for this, it worked for my Thomson.0
-
To anyone who switched their Thompson, does the phone still work?0
-
Phone still works.0
-
white_westie wrote: »To anyone who switched their Thompson, does the phone still work?
lol which one of us will get itchy fingers first0 -
white_westie wrote: »To anyone who switched their Thompson, does the phone still work?
The phone works as I've tested this straight after discovering this - I've mentioned about the phone in OP.0 -
I don't suppose that someone has found a way of getting the Technicolor modem into bridge mode? It's the one thing that's making me cling to my 2203 at 30 meg.0
-
OP updated with different Windows method (thanks to Jonathanpbk) and -unix method (thanks to drabisan)0
-
Advertisement
-
found the OID with with Windows guide 2 (thanks to Jonathanpbk) very easily on tc 7200 but not have enough guts to change the value from 2 to 1
below screenshot of MIB Browser0 -
found the OID with with Windows guide 2 (thanks to Jonathanpbk) very easily on tc 7200 but not have enough guts to change the value from 2 to 1
below screenshot of MIB Browser
So, has anyone had the guts to try this on their Technicolor?I'd do it if I had one but I'm holding off on upgrading until I know this works.
0 -
-
Thanks for this. Working 100%! Now I have my Asus RT-N16 with Tomato USB working 100% with WAN IP and everything working.
Used Linux command from Kubuntu.
Did have an issue with the Asus picking up the WAN IP via DHCP though, but I followed this procedure I found on a OpenWRT support page:
1 - Unplug both UPC router and your other router.
2 - Unplug the coaxial cable from the UPC router for 30 seconds - this is important.
3 - Plug the coaxial cable back in and power on the UPC cable modem.
4 - Wait until all lights are on - modem connected, online, etc.
5 - Plug in your other router.
Your other router should have picked up the WAN IP now.0 -
The reason for this is that most cable modems will only issue a public IP to one device, so you have to reboot the modem for it to issue the address to another device.0
-
-
Hi all. Will this work on the thomson tc7200. Really need to get this piece of crap into modem only mode. Thanks.
Yes m8,check here
http://www.boards.ie/vbulletin/showpost.php?p=88467131&postcount=3940 -
Folks,
I spent hours looking for solution to change Thomson TWG870U to cable modem mode.
I tried the html code injection based on great guide by DECEiFER, but without success.
I finally have managed to achieve this by changing value in MIB table. Here is how to: (use network cable connected directly to Thomson router, don't do this over WiFi)
Windows guide 1 (original one that worked for me)
1. Download application capable of MIB editing (I have used CM watch (client) - nice cable modem monitoring tool, can be downloaded here)
2. Download Net-SMP from here.
3. Make sure you set up your CM Watch correctly:
* Host - this is your router
* Leave community settings at public.
* we don't need (and we don't know) CMTS IP address.
* path to NET-SNMP installation.
4. Make sure you disable firewall on both your PC and router, disable any antyvirus software you have. Also enable 'Remote Config Management' on the Thomson
Once I've done all steps above I could see some info from the mode.
5. Select 'Set OID' from the icon bar.
6. Change following key:
1.3.6.1.4.1.4413.2.2.2.1.7.1.1.0
from 2 to 1
Type: Integer
Use bottom part of the 'Set OID' window. When ready just click 'Set'
7. Router should restart itself and change mode from 'Cable Home' to 'Cable Modem. That's it!
My Open-WRT have public IP now (on the picture below it is my pc to show the method working), speeds are a bit better but ping was greatly improved. Phone still works.
Windows guide 2 (thanks to Jonathanpbk)
Linux / Unix / Mac OS X guide (thanks to drabisan)
Note 1:
Modem settings can be reverted to default by doing factory reset - just hold the reset button at the back of the modem for > 30 seconds
Note 2:
Router can be accessed under: 192.168.100.1
Sorry. I am a little confused here. If I follow windows option 2 above in OP, will that set the TC7200 to modem only mode? Will that mean that I can use a better Wireless modem Router to assign IP's etc ?. Thanks for all the good work Guys.0 -
Sorry. I am a little confused here. If I follow windows option 2 above in OP, will that set the TC7200 to modem only mode? Will that mean that I can use a better Wireless modem Router to assign IP's etc ?. Thanks for all the good work Guys.0
-
Advertisement
-
I am going to try windows option 2 later this week. Will i be running an Ethernet cable from the LAN port of the TC 7200 to the WAN port of a wireless modem router ? And, can anyone recommend a good and reliable Wireless modem router suitable for this task ??As usual, thanks everyone.0
Advertisement