Detailing chat

MuppetCheck

Mc Love wrote: »

You could get Hydro2foam and use it as a shampoo.

Just remembered I have a few shampoos in the parents shed, I'll give it a blast of foam, two bucket and then clean it with APC before I use it instead. Ordered it there to try out. Looks ideal for this time of the year.

Curran

It will be ideal - so simple to apply, good protection....and if you notice it start to show signs of failing, it only takes 10 mins to re-apply, to see you through to the good weather!
Its actually very impressive the change in appearance, in terms of shine, that it creates, with no effort - beads great too! Its fun watching it change from hydrophilic to hydrophobic, as you wash it off! Beads great too!

You should get 3 coatings with the litre Hydro2Lite!

ianobrien

I'll be putting in an order for stuff in the new year and this Hydro2foam just might make it on the list. It better be worth the hype, that's all I'm saying!

*Kol*

Foxhole Norman wrote: »

D&D Detailing are going to be stocking them very soon, going to pick up a complete kit myself I'd say.

Has anybody used the 2D snowfoam that D&D sell?

Ron Burgundy II

*Kol* wrote: »

Has anybody used the 2D snowfoam that D&D sell?

Yes and I'm very impressed by it.

Foxhole Norman

*Kol* wrote: »

Has anybody used the 2D snowfoam that D&D sell?

Yep, I find it very good too, They're wash and wax makes a good foam too! Wheel cleaner is also fantastic!

mhackett102

What would be the best Iron Remover & Tar Remover that would do both the bodywork and alloys? I remember one was recommended before (it was the two in one) but I've forgotten the name Im also picking up a clay bar too. Any recommendations of where I can get all these together?

Hal1

Korrosol, detailing shed.

Curran

mhackett102 wrote: »

What would be the best Iron Remover & Tar Remover that would do both the bodywork and alloys? I remember one was recommended before (it was the two in one) but I've forgotten the name Im also picking up a clay bar too. Any recommendations of where I can get all these together?

There isnt many products that are an Iron Remover and Tar Remover.
There is a product called CarPro Trix that does both, but two separate products will do a far better job at doing each of their given tasks.

Iron Remover: CarPro IronX, Bilt Hamber Korrosol*, or Auto Wheel for the alloys (*Korrosol is safe more most wheel finishes)

Mc Love

Another not really a detailing question? But as I don't want to get swirl marks after getting a paint perfection done, what is the best type of wedding ribbon to use on the car?

And don't say none!

vectra

Mc Love wrote: »

Another not really a detailing question? But as I don't want to get swirl marks after getting a paint perfection done, what is the best type of wedding ribbon to use on the car?

And don't say none!

None

JaMarcusHustle

Dropping my car in to Brian @ Spirit Detailing on Monday for an exterior detail. Can't wait

Out of interest, what should I be doing to maintain the work he does on it, and how often should I be doing it? Obviously I'll ask him when I'm there but just curious.

vectra

JaMarcusHustle wrote: »

Dropping my car in to Brian @ Spirit Detailing on Monday for an exterior detail. Can't wait

Out of interest, what should I be doing to maintain the work he does on it, and how often should I be doing it? Obviously I'll ask him when I'm there but just curious.

Brian will give youthe best advice due to the fact he is the one that knows what LSP he used on it.

But basics are a big help

Curran

Mc Love wrote: »

what is the best type of wedding ribbon to use on the car?

Unfortunately there is probably no ribbon that will not cause some sort of very light swirling. That said, if you can get a velvet ribbon, that would probably be the best - but you will likely have to give the areas the ribbon flutters in the wind and contacting the paintwork (ie: the bonnet around the grills and wherever you tied it off to), a light machine polish, probably only a 15 mins job to the the areas lightly affected.

JaMarcusHustle wrote: »

Out of interest, what should I be doing to maintain the work he does on it, and how often should I be doing it? Obviously I'll ask him when I'm there but just curious.

At the very minimum....
- Washing with a two bucket method and a good quality wash mitt
- Drying with a good quality microfiber drying towel
Doing that as your regular washing, should keep it looking extremely well for quite some time.

What to ask Brian...
- What shampoo is best to maintain the coating, so not to affect it in any way
- What maintenance product would be helpful for a simple spray on buff off, to keep the finish enhanced / glossy

That would be the basics! In terms of shampoo, regular pH neutral shampoo, may not be ideal (will do a job), as it may clog the microscopic structure of the coating, and take away from the finish - the finish will still be there, but shine may not be as impressive, or beading/sheeting of water will decrease over time....using the recommended products will ensure you get the full potential from the coating.

Mc Love

Won't be travelling far with the ribbon anyway

Dean12319

Hi all, posted a thread on the careers forum yesterday re: becoming a Valetor/ Detailer. Have had only 1 reply who said I should contact anyone in the trade here. So could anyone who is working or worked in the job get in contact with me for some advice? Cheers. Dean

YbFocus

Anyone know anyone from D+D detailing lads?

I've finally been starting to build my few bits to start proper detailing on my cars rather than just washing them and throwing autoglym at them.

I've got almost everything off them and they always throw in a pack of haribo etc.
Got a nice happy new year note in my latest one too.

Stuff like this is great, nothing else to say really


I want to get going with my new DA and mezerna gear soon!

crasy dash

YbFocus wrote: »

Anyone know anyone from D+D detailing lads?

I've finally been starting to build my few bits to start proper detailing on my cars rather than just washing them and throwing autoglym at them.

I've got almost everything off them and they always throw in a pack of haribo etc.
Got a nice happy new year note in my latest one too.

Stuff like this is great, nothing else to say really


I want to get going with my new DA mezerna stuff soon!

Nice lads from my experience never been up there as I'm closer tolimerick than cork.

Any questions have always been answered on fb and like you got something free when I ordered the Christmas set off them got it today so I'm happy out.

Rare to get that customer care these days so fair play to them

YbFocus

crasy dash wrote: »

Nice lads from my experience never been up there as I'm closer tolimerick than cork.

Any questions have always been answered on fb and like you got something free when I ordered the Christmas set off them got it today so I'm happy out.

Rare to get that customer care these days so fair play to them

Exactly, it's great to see!
Just thought I'd mention it because it is rare

Curran

Dean12319 wrote: »

Hi all, posted a thread on the careers forum yesterday re: becoming a Valetor/ Detailer. Have had only 1 reply who said I should contact anyone in the trade here. So could anyone who is working or worked in the job get in contact with me for some advice? Cheers. Dean

You can PM with any questions you have!

Foxhole Norman

YbFocus wrote: »

Anyone know anyone from D+D detailing lads?

I've finally been starting to build my few bits to start proper detailing on my cars rather than just washing them and throwing autoglym at them.

I've got almost everything off them and they always throw in a pack of haribo etc.
Got a nice happy new year note in my latest one too.

Stuff like this is great, nothing else to say really


I want to get going with my new DA and mezerna gear soon!

I know them pretty well, sound bunch of lads to be honest!

Dean12319

Curran wrote: »

You can PM with any questions you have!

Great that's brilliant! I'll contact you tomorrow.

Ron Burgundy II

Foxhole Norman wrote: »

I know them pretty well, sound bunch of lads to be honest!

+1. Pity they moved from their south side location, great to be able to pop over and get a few bits on a Saturday if I was ever stuck. A bit of a trek to their new building but it's a much better set up.

YbFocus

Foxhole Norman wrote: »

I know them pretty well, sound bunch of lads to be honest!

Well tell them they are well liked!

Foxhole Norman

YbFocus wrote: »

Well tell them they are well liked!

I'd say they know at this stage :pac:

shietpilot

What would be a decent clay bar that's relatively cheap and effective?

Would a Halfords job be good or should I look at Detailing Shed and the likes?

MetzgerMeister

The only clay bars Halfords have are the Meguiars ones which are rather expensive for what you get. Much better off buying from Detailing Shed as they have a range of different choices. I personally use the Bilt Hamber and Autobrite clays and find them great.

*Kol*

Halfords have an Autoglym clay kit too.

They also have a clay mitt from G3 which I am tempted to get. It should be much faster than using a small piece of clay.

corks finest

*Kol* wrote: »

Halfords have an Autoglym clay kit too.

They also have a clay mitt from G3 which I am tempted to get. It should be much faster than using a small piece of clay.

Mitt dear?worth the price?

*Kol*

corks finest wrote: »

Mitt dear?worth the price?

It's €14.99 so would be worth a try.

BrendanD

*Kol* wrote: »

It's €14.99 so would be worth a try.

I bought the clay mitt and used it on my car , think it done a good job , read somewhere to use it on the windows first and was amazed on the amount of crap it took off.

corks finest

BrendanD wrote: »

I bought the clay mitt and used it on my car , think it done a good job , read somewhere to use it on the windows first and was amazed on the amount of crap it took off.

Good advice

corks finest

BrendanD wrote: »

I bought the clay mitt and used it on my car , think it done a good job , read somewhere to use it on the windows first and was amazed on the amount of crap it took off.

Tnx

vectra

corks finest wrote: »

Tnx

Oh oh..!!

YbFocus

vectra wrote: »

Oh oh..!!

u k hun? x o x o

Noccy_Mondy

YbFocus wrote: »

u k hun? x o x o

lykk if yhu chried evrii tym xoxo

ianobrien

Am I the only one who is wondering what language was used in the last few posts?

Is there a new language out there, or am I a slow dry ar$e that can't understand the "new ways"? (I'm in my 30's so I'm not an old fart).







I'm leaning to a slow dry ar$e myself!

YbFocus

It's just that text speak/Facebook crap that we are laughing at is all, don't think for a second we talk like that around here

vectra

YbFocus wrote: »

It's just that text speak/Facebook crap that we are laughing at is all, don't think for a second we talk like that around here

Dats Gr8
tnk Hun.

ianobrien

YbFocus wrote: »

It's just that text speak/Facebook crap that we are laughing at is all, don't think for a second we talk like that around here

Geez I'm really stupid that I couldn't see that.


Then again, I don't use BookFace to see the highlight of Irish intellect.

crasy dash

ianobrien wrote: »

Geez I'm really stupid that I couldn't see that.


Then again, I don't use BookFace to see the highlight of Irish intellect.

I was the same as yourself till it was pointed out above god I feel old haha

vectra

ianobrien wrote: »

Am I the only one who is wondering what language was used in the last few posts?

Is there a new language out there, or am I a slow dry ar$e that can't understand the "new ways"? (I'm in my 30's so I'm not an old fart).

I'm leaning to a slow dry ar$e myself!

crasy dash wrote: »

I was the same as yourself till it was pointed out above god I feel old haha

Ah lads.
I.m well older than both of ye and I get it..
Ye need to get out more I think :pac:

MuppetCheck

Have a reversing camera on the car and the position of it means its open to spray on the motorway. What's the best coating you could use for plastic. Used hydro2 on it but it leaves streaks. Is there anything specifically for plastic?

crasy dash

Next item I must get is a clay bar just wondering whats the best thing to use as a lubricant when using it?

Foxhole Norman

crasy dash wrote: »

Next item I must get is a clay bar just wondering whats the best thing to use as a lubricant when using it?

All I use for mine is a small bit of shampoo mixed with water in a pressure sprayer, cheap and does the job perfectly!

DoctorStrange

Curran,

Any idea on when you'll have the Wheel Wollies back in stock?

http://www.detailingshed.com/wheels-tyres/187-wheel-woolies.html

Looking to put in an order in the next couple of weeks.

Curran

It's on the list of priorities, but its not at the top!

However, I do have a spare set that I had set aside for myself....that I can fix you up with, give that I dont need them until I get my wheels refurbished. Just let me know when you are wanting to order, and I can put a set back in stock for you to order through the site!

Gordy6040

Hi lads. I haven't been around in a while so this may have been covered. This morning I noticed mould starting to appear in the back of the car. It's on the panels, kids seats and back seats. I think one of the windows may have been left open a crack, I dont think it's a seal. Is there a product or method for removing it?

Thanks for your help
G

ianobrien

Mould is an organic material so after cleaning the panel (APC and hot water) and cloth materials (seat cleaner, eg Autoglym Interior Shampoo) I use Dettol anti-bacterial spray or wipes to kill the mould spores.

If you have a wet 'n dry vacuum, use that before the Dettol Anti-bacterial spray. Words to the wise, there are other anti-bacterial sprays/wipes on the market and what ever you use, try it first on an innocuous piece of interior trim (back of rear seat). Some contain bleach and don't use anything that had bleach/sodiun hypochloride.

Newtown90

Has anyone tried the new EZCarCare range? Just looking at the review Facebook page and all seems positive.