Wiring the sabb bellbox to the HKC 10/12 panel?

Chickentown

Hi just wondering what is the correct way to wire the Sabb bellbox to the panel.

I have the following connections made inside the bellbox:

Red core: External bell +
Black core: External bell -
Yellow core: Left tamper terminal
Blue core: Sab hold BHO
Green core: Strobe +
White core: Strobe -

What are the correct terminals to wire these to back at the panel, and also; do I need to do anymore work inside the bellbox?

Any help appreciated.

altor

Chickentown wrote: »

Hi just wondering what is the correct way to wire the Sabb bellbox to the panel.

I have the following connections made inside the bellbox:

Red core: External bell +
Black core: External bell -
Yellow core: Left tamper terminal
Blue core: Sab hold BHO
Green core: Strobe +
White core: Strobe -

What are the correct terminals to wire these to back at the panel, and also; do I need to do anymore work inside the bellbox?

Any help appreciated.

They are the same connections in the panel.
External to external.
Tamper return to tamper return.
Bho to bho.
Strobe to internal in panel.

Chickentown

Thanks Altor, just to confirm; the strobe + and - from the bellbox should be connected to the intetnal bell + and - at the panel?

altor

Chickentown wrote: »

Thanks Altor, just to confirm; the strobe + and - from the bellbox should be connected to the intetnal bell + and - at the panel?

That's correct. If you have the engineer code then you could program one of the outputs if not used as strobe rather than put it in with the internal, but it will work set up that way.