Amiko Alien2 / SAB / GM / ST7162 ** ENIGMA ** Discussion Thread

Fresh Pots

championc wrote: »

Yes, it's working perfectly. I just tried tonights Fairly Sh1tty

Few things, you never added a channel list, the sats are set to single so they need to be changed to advanced 28.2 to work and autobouquets won't run.

Anchises

Never came across that before to be honest. Incase it is that his is set to 1080, maybe flash mine and see how you get on. At least if that doesn't work then you know it's something else and not the screen resolution

@ FreshPots

Loaded up your image...

Still on reboot it does the Triplex, PKT SVN 2874, Load 52,60,66,73,79,80,82,86,89,91,94,95.
Start

And then shows Kerrang! on the STB display - then hangs - unresponsive.

Same problem

What is the Name/Password to Filezilla to it ?

A.

Fresh Pots

Anchises wrote: »

@ FreshPots

Loaded up your image...

Still on reboot it does the Triplex, PKT SVN 2874, Load 52,60,66,73,79,80,82,86,89,91,94,95.
Start

And then shows Kerrang! on the STB display - then hangs - unresponsive.

Same problem

What is the Name/Password to Filezilla to it ?

A.

Username:root
Password:pkteam

Have you got one or two satellite feeds into the box? Are you sure they are in the correct slots?

Anchises

Got in with the name + pwd ....OK. Thanks

Just checked, my sattelites.xml file is there.

Only one cable at present - into the LNB input closest to the edge (I think thats Tuner 1).

How do I set the tuner, if i'm looking at the wrong one ?

A.

same ol sh1te

Anchises wrote: »

Got in with the name + pwd ....OK. Thanks

Just checked, my sattelites.xml file is there.

Only one cable at present - into the LNB input closest to the edge (I think thats Tuner 1).

How do I set the tuner, if i'm looking at the wrong one ?

A.

Swap the cable at the back. You really need both

Fresh Pots

Anchises wrote: »

Got in with the name + pwd ....OK. Thanks

Just checked, my sattelites.xml file is there.

Only one cable at present - into the LNB input closest to the edge (I think thats Tuner 1).

How do I set the tuner, if i'm looking at the wrong one ?

A.

Go to menu -setup - service search and turn off the second sat tuner by setting it to not configured.

Not at the box now to check but if you look at the back of the box just double check that its in lnb1

Fresh Pots

same ol sh1te wrote: »

Swap the cable at the back. You really need both

No need to swap the cable if he sets the unused tuner to not configured. Box will work fine then.

championc

Fresh Pots wrote: »

Few things, you never added a channel list, the sats are set to single so they need to be changed to advanced 28.2 to work and autobouquets won't run.

I scanned nothing. You need to do a full scan of both Terrestrial and Satellite.

Fresh Pots

championc wrote: »

I scanned nothing. You need to do a full scan of both Terrestrial and Satellite.

Fair enough, I just tried to do a nit scan with autobouquets though and it wasn't playing ball. Installing another version of ab now.

Anchises

I swapped the sat cable input to TUNER 2 -
Now on reboot it does exactley as before but stops at 'Start' , just before displaying the station name.
(it does not display the station name).

Seems to mean that it is reading some data from the LNB tuner1 input ?

Rebooted - same thing.
Tried powering off the TV - to see if the HDMI might negotiate with the STB. No good.

Still puzzled.

Is there any useful info I can get from the box by filezilla ? - since that is the only way to see Enigma now.

Glad it's dual boot...At least I can go back to Spark - to keep 'she who must be obeyed' happy.

A.

Fresh Pots

Anchises wrote: »

I swapped the sat cable input to TUNER 2 -
Now on reboot it does exactley as before but stops at 'Start' , just before displaying the station name.
(it does not display the station name).

Seems to mean that it is reading some data from the LNB tuner1 input ?

Rebooted - same thing.
Tried powering off the TV - to see if the HDMI might negotiate with the STB. No good.

Still puzzled.

Is there any useful info I can get from the box by filezilla ? - since that is the only way to see Enigma now.

Glad it's dual boot...At least I can go back to Spark - to keep 'she who must be obeyed' happy.

A.

Put the cable back in lnb1 and set lnb2 to not configured as I said above and the fta channels should appear.

Anchises

Go to menu -setup - service search and turn off the second sat tuner by setting it to not configured.

Can't get into box . Unresponsive to any keys (STB or remote)

A.

Anchises

Put the cable back in lnb1 and set lnb2 to not configured as I said above and the fta channels should appear.

Cable is back on LNB1 , but how to get into the box ?

set lnb2 to not configured

Can I do that in Spark and will it be so when in Enigma2 ?

Or could I edit some config file by using Filezilla ?

A.

Fresh Pots

Anchises wrote: »

Can't get into box . Unresponsive to any keys (STB or remote)

A.

If you reboot with the cable in lnb1 are the menus still unresponsive?

Fresh Pots

Anchises wrote: »

Cable is back on LNB1 , but how to get into the box ?

Can I do that in Spark and will it be so when in Enigma2 ?

A.

No they're separate. One has no bearing on the other. And you have channels working in spark?

Anchises

I copied down 'settings' file to look at it.

this line appears in it.

config.tv.lastservice=1:0:1:2EEF:7F8:2:11A0000:0:0:0::Kerrang!

So it's getting the displayed station from that file, I expect .....not any info from an LNB.

Also :

config.av.videomode.HDMI=720p

A.

Fresh Pots

Anchises wrote: »

I copied down 'settings' file to look at it.

this line appears in it.



So it's getting the displayed station from that file, I expect .....not any info from an LNB.

A.

Have you channels working in spark?

Anchises

Also in the settings file

config.av.videomode.HDMI=720p

So I'm certain that it's not a resolution issue now.

A.

Anchises

If I reboot into Spark all channels work ok .

No problems in spark.

Will revert to Spark again just to check - but i was in spark earlier tonite.


A.

Fresh Pots

Did you say you have channels working in spark? that would rule out sat/lnb/tuner issues

Anchises

Just rebooted Spark and it works perfectly.

Rebooted back to Enigma2 and start Kerrang! displays after the boot up prelims.
box unresponsive to Remote or front panel keys.

A.

Fresh Pots

Anchises wrote: »

Just rebooted Spark and it works perfectly.

Rebooted back to Enigma2 and start Kerrang! displays after the boot up prelims.
box unresponsive to Remote or front panel keys.

A.

Don't know why thats happening. Its a new one on me. Do you see the sky boot logo when its starting up?

Anchises

No output at all on the TV. Not even a slight flash

All output is on the STB display panel only.

A.

Fresh Pots

Anchises wrote: »

No output at all on the TV. Not even a slight flash

All output is on the STB display panel only.

A.

If possible try another hdmi cable and maybe in a different hdmi port on your tv.

Anchises

Is the output sent to the Scart socket ?

Could I try a scart cable to see if any info comes out ?

A.

Fresh Pots

Anchises wrote: »

Is the output sent to the Scart socket ?

Could I try a scart cable to see if any info comes out ?

A.

No its set up for hdmi.

Anchises

I'm sorry
This is a little embarassing.:o:o:o:o:o

I went to swap the HDMI cable to another port and found it was loose in the socket. I pushed it in and the picture came up

But why the hell did it work for spark every time and not for Enigma with the cable loose!!! Could it be signal strength ? or HDMI protocol being more demanding in one or other of the images ?

Anyway , Thanks for all your help.
I'm really sorry for generating all that confusion.

It now looks like a SKY box output

Let joy be unconfined. I'm going to have a beer and relax.

A.

Fresh Pots

Anchises wrote: »

I'm sorry
This is a little embarassing.:o:o:o:o:o

I went to swap the HDMI cable to another port and found it was loose in the socket. I pushed it in and the picture came up

But why the hell did it work for spark every time and not for Enigma with the cable loose!!! Could it be signal strength ? or HDMI protocol being more demanding in one or other of the images ?

Anyway , Thanks for all your help.
I'm really sorry for generating all that confusion.

It now looks like a SKY box output

Let joy be unconfined. I'm going to have a beer and relax.

A.

Well at least your sorted now. You'll probably need to rescan the saorview channels if your not near kippure and run autoboquets again as the image is a few months old and some channels have moved, when it asks say yes to a nit scan.

Anchises

It's brilliant

I've always got only FTA channels.
No Sky subscription

Is there a way to limit the listing to FTA channels ?

A.

Anchises

Been exploring
I've found the FTA listing.

Interesting Image

Thanks

A.