Amiko Alien2 / SAB / GM / ST7162 ENIGMA Discussion Thread

cyndale · 14-01-2015 11:26pm

cyndale wrote: »

I have Crossepg saving to my USB, but it also saves to internal flash. I thought if you selected external device, it wouldn't save to internal flash?

Can anybody comment on this please!

Imstuck · 14-01-2015 11:27pm

cyndale wrote: »

Can anybody comment on this please!

How do you know this ?

Imstuck · 14-01-2015 11:35pm

Slevster wrote: »

can you log into the router to see if you can see your box's mac address?

on your box, have you DHCP enabled?

When I go into setup, system, network, the 'link' with a box next to it at the bottom of screen which should contain a green tick, is empty, I've a feeling there might be a problem with it recognising the internet

cyndale · 14-01-2015 11:47pm

Imstuck wrote: »

How do you know this ?

Because I'm stuck!:D

dkane · 15-01-2015 12:03am

How do I get picons to show on the epg?
They work for me in the info bar but not in epg.

Nowso · 15-01-2015 12:06am

you have to change the default network type on enigma2 if you had been using wifi u need to change it to ethernet . did u try it on Spark ?

Slevster · 15-01-2015 12:54am

dkane wrote: »

How do I get picons to show on the epg?
They work for me in the info bar but not in epg.

If using crossepg 0.6 or 0.8 , if not showing , while in the guide, press menu , and blue button options, should be a show picon option .
For channel list picons, enable by going to menu- set up a system-user interface and then select show picons in channel list

dkane · 15-01-2015 12:56am

dkane wrote: »

How do I get picons to show on the epg?
They work for me in the info bar but not in epg.

Figured it out. Cool Epg doesn't look in /media/hdd for picons.
Used telnet to connect to box and added this symlink:

ln -s /media/hdd/picons /coolpicons

RobTheLad · 15-01-2015 2:18am

Hey guys, I have an AA2+ a couple of months and have decided to get a SAB for another room in the house. Just wondering if the SAB will work with Fresh Pot's image?

_Jumper_ · 15-01-2015 2:40am

RobTheLad wrote: »

Hey guys, I have an AA2+ a couple of months and have decided to get a SAB for another room in the house. Just wondering if the SAB will work with Fresh Pot's image?

yup, all the same under the hood.

RobTheLad · 15-01-2015 2:51am

_Jumper_ wrote: »

yup, all the same under the hood.

cheers, thanks

Imstuck · 15-01-2015 9:05am

Nowso wrote: »

you have to change the default network type on enigma2 if you had been using wifi u need to change it to ethernet . did u try it on Spark ?

Yep, failed on spark also.
Cable problem?

It's gonna be a trial & error job today, so if I have a 'primary ip' is the box recognising the internet/cable??

hallo dare · 15-01-2015 10:46am

@imstuck

Let's start from the beginning.

Can you test something else on that ethernet cable or swap it for another?

If all's good then follow on.

Below IP's are for example purpose.

1. You have your box connected to your router via ethernet.
2. On your STB go to network settings for your box.
3. For the moment disable DHCP so we can enter our own details.
4. Let's say your routers address is 192.168.0.1
5. So lets say we give you box an IP of 192.168.0.140.
6. Subnet Mask should be 255.255.255.0.
7. Gateway should be the IP of your router, in our example case it's 192.168.0.1
8. Edit your DNS for Nameserver 1, 8.8.8.8.
9. Edit your DNS for Nameserver 2, 8.8.4.4.
10. Click save and give it a few seconds for network activation.

After you've done all that, give it a test.

Imstuck · 15-01-2015 10:55am

Thanks for the detailed response Hallo Dare, will report back later!

gleannboy · 15-01-2015 6:15pm

Hi guys,

Would anyone have a copy of the add on "cache flush" would be much appreciated
Thanks in advance.

Fresh Pots · 15-01-2015 6:17pm

gleannboy wrote: »

Hi guys,

Would anyone have a copy of the add on "cache flush" would be much appreciated
Thanks in advance.

https://www.dropbox.com/sh/0y4psifwao9ntyi/AADvXqgyqEt3GE-VahQ-d6Q6a?dl=0

RobTheLad · 15-01-2015 7:47pm

Hi guys, I picked up a SAB F+ Solo today, which came pre-loaded with an image of Enigma2, and decided to give Fresh Pots image a go. I've upgraded to it via Spark and have tried booting back into Enigma but it's stuck with a load message on the lcd panel on the front of the box for the past 20 minutes. Any help regarding what it may be?

Nowso · 15-01-2015 7:54pm

RobTheLad wrote: »

Hi guys, I picked up a SAB F+ Solo today, which came pre-loaded with an image of Enigma2, and decided to give Fresh Pots image a go. I've upgraded to it via Spark and have tried booting back into Enigma but it's stuck with a load message on the lcd panel on the front of the box for the past 20 minutes. Any help regarding what it may be?

his image was for a triple tuner not a single tuner

zardoz posted an 8900/ single tuner image a while back

RobTheLad · 15-01-2015 9:34pm

Nowso wrote: »

his image was for a triple tuner not a single tuner

zardoz posted an 8900/ single tuner image a while back

Thanks, found that and installed it, and all is running fine! Anyone happen to know Zardoz's FTP details for his image?

Imstuck · 15-01-2015 9:38pm

root & pass is pkteam

RobTheLad · 15-01-2015 9:40pm

Imstuck wrote: »

root & pass is pkteam

Cheers

Griffinx · 15-01-2015 9:56pm

Running Hyperion 4.5 and love it... thanks to all the guys that create these images.

Just wondering why would sky1 or sky arts be in the Hyperion favourite list as they are not free to air

how.gareth · 15-01-2015 10:23pm

Griffinx wrote: »

Running Hyperion 4.5 and love it... thanks to all the guys that create these images.

Just wondering why would sky1 or sky arts be in the Hyperion favourite list as they are not free to air

You can edit the channel listing to suit yourself, do it via your remote control or using a program called dreambox edit on your pc

Griffinx · 15-01-2015 10:28pm

how.gareth wrote: »

You can edit the channel listing to suit yourself, do it via your remote control or using a program called dreambox edit on your pc

I understand that and have edited some channels already, just wondering why those channels would have been included in the image when they aren't available.

hallo dare · 15-01-2015 11:36pm

Griffinx wrote: »

I understand that and have edited some channels already, just wondering why those channels would have been included in the image when they aren't available.

Depends how you use the box.

jayo26 · 16-01-2015 12:08am

hallo dare wrote: »

Depends how you use the box.

Love this answer

Griffinx · 16-01-2015 12:10am

jayo26 wrote: »

Love this answer

The penny has dropped, this box is a lot more interesting than I realised

_Jumper_ · 16-01-2015 12:22am

hallo dare wrote: »

Depends how you use the box.

jayo26 wrote: »

Love this answer

I lol aswell.

Griffinx · 16-01-2015 3:43pm

Hi,

Im trying to login to Oscam on Hyperion 4.5 but get 403 Forbidden Access denied. I think its something to do with httpallowed in the oscam config

[webif]
httpport = 15500
httpuser = *****
httppwd = *****
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.28-192.168.0.xx

Can someone tell me where on the box this file is located.

Thanks.

dkane · 16-01-2015 3:48pm

Griffinx wrote: »

Hi,

Im trying to login to Oscam on Hyperion 4.5 but get 403 Forbidden Access denied. I think its something to do with httpallowed in the oscam config

[webif]
httpport = 15500
httpuser = *****
httppwd = *****
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.28-192.168.0.xx

Can someone tell me where on the box this file is located.

Thanks.

Are you using boxipaddress:8888
Username root
Password oscam

Amiko Alien2 / SAB / GM / ST7162 ** ENIGMA ** Discussion Thread

Comments

Amiko Alien2 / SAB / GM / ST7162 ENIGMA Discussion Thread