Silencer for ASG SSG 69p2

dazza161989

Hey does anyone have a silencer for the above rifle?? Tried every single one that my local shop had but to no avail!!!

thermo

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=1888&category_id=32&manufacturer_id=0&option=com_virtuemart&Itemid=26

dazza161989

thermo wrote: »

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=1888&category_id=32&manufacturer_id=0&option=com_virtuemart&Itemid=26

Seen that one, the thing is huge!!

thermo

dazza161989 wrote: »

Seen that one, the thing is huge!!

That's what she said......... :eek:

dazza161989

thermo wrote: »

That's what she said......... :eek:

Boards.....the home of witty banter!

dazza161989

thermo wrote: »

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=1888&category_id=32&manufacturer_id=0&option=com_virtuemart&Itemid=26

Ended up buying it couldn't find anything else!!

dazza161989

Well it arrived and by god when they said XL they meant it, so I decided to camo wrap it (maybe spray down the line) just to have some small hope of being inconspicuous!!!

dazza161989

thermo wrote: »

http://www.airsofteire.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=1888&category_id=32&manufacturer_id=0&option=com_virtuemart&Itemid=26

Did u ever use one of these when you had this rifle? BBS are shattering when leaving the silencer, was thinking I might increase the diameter of the hole with a dremel to see if it helps!! There seems to be a slight lip on the internal side of the end cap which is the only thing that I see which could be causing them to explode!

Also did you ever try source an upgraded barrel for one??

Thanks!!

thermo

Sound so like the silencer is either loose or at an angle, enlargement of the silencer exit will probably solve the problem. ( once you make sure it's straight and square)

I never used one of those silencers on my ssg, but it is supposed to be designed for the SSG. So you would think it would work.

If memory serves correct I modded an aeg inner barrel and hop up rubber to fit mine when I had it.

dazza161989

thermo wrote: »

Sound so like the silencer is either loose or at an angle, enlargement of the silencer exit will probably solve the problem. ( once you make sure it's straight and square)

I never used one of those silencers on my ssg, but it is supposed to be designed for the SSG. So you would think it would work.

If memory serves correct I modded an aeg inner barrel and hop up rubber to fit mine when I had it.

Ya I thought that the fact that it was for that rifle it would function correctly!! I'm going to bore out the exit hole to about 10mm, then de-bur, file & sand smooth and see how it goes!! In what way did you have to mod the barrel as the one which comes as stock is rubbish!! By any chance you wouldn't still have it??

thermo

Still have what??

dazza161989

thermo wrote: »

Still have what??

The inner barrel you modified?

dazza161989

Problem ended up being the inner PVC barrel of the silence was warped and stuck at an angle!!! I bored a larger hole in the end cap of the silencer, removed the sh***y piece of pipe, cut down a tapered rifle shaft from a golf club(narrow end facing the gun),pressed it in tight, filed down & sanded the hole I drilled, sprayed Matt black & bobs your uncle it's now working as it should have in the beginning!!!

Thanks for all the help with this thermo!

thermo

My pics?