E-Channelizer for Enigma2 .

bored_stupid

http://www.echannelizer.com/

Worth a look .

banie01

bored_stupid wrote: »

http://www.echannelizer.com/

Worth a look .

Fantastic bit of software!
The bouquets generation via King of Sat plugin is a god send for multi-sat systems!

byte

Looks like a nice bit of software. Thanks for the heads up!

STB.

Havent tried it. I use.

https://dreamboxedit.com/

ShaneOC

Seems to have the same issue that I find with dreambox edit.

I have the channels set up as follows:

1: RTÉ One HD
2: RTÉ 2 HD
3: TV3
4: TG4
5: 3e
6: Be3
7: RTÉ Jnr

The rest of the channels are (mostly) set up as Sky UK:

101: BBC One HD
102: BBC Two HD
103: ITV HD
104: Channel 4 HD
105: Channel 5 HD

Most of the time when I pull the channels from the receiver then dreamboxedit and echannelizer remove the gaps and BBC One HD jumps to channel 8, but sometimes the gaps are retained.

Any suggestions on how to retain the gaps on a consistent basis?

SayyiD

@bored_stupid
Thanks for introducing E-Channelizer here, hope you enjoy it.

@ShaneOC
You can not assign numbers, bouquet entries are numbered sequentially by Enigma. However, you can insert Hidden Markers as dummy fillers to customize the numbering.

Feel free to ask, glad to join you and show some support here!

E-Channelizer Team

nava

SayyiD wrote: »

@bored_stupid
Thanks for introducing E-Channelizer here, hope you enjoy it.

@ShaneOC
You can not assign numbers, bouquet entries are numbered sequentially by Enigma. However, you can insert Hidden Markers as dummy fillers to customize the numbering.

Feel free to ask, glad to join you and show some support here!

E-Channelizer Team

Also I see ABM AutoBouquetMaker doesn't work with it, when you reload the list to the box, next time ABM runs it will generate new bouquets.


Also does anyone know of a way to highlight on the software or update channels when frequency changes for a channel or remove if they are not longer available.

SayyiD

The next release will be fully compliant with ABM plugin. If you are interested in trying it out now, you welcome to join the BETA community on G+

StaticNoise

Here's the communities that SayyiD mentioned above:

General - https://plus.google.com/u/0/communities/114436356737277246366
Beta - https://plus.google.com/communities/117239057464482413902

ShaneOC

@ShaneOC
You can not assign numbers, bouquet entries are numbered sequentially by Enigma. However, you can insert Hidden Markers as dummy fillers to customize the numbering.

Feel free to ask, glad to join you and show some support here!

E-Channelizer Team

Finally got around to checking out the hidden markers. They work perfectly - thank you.

One new question for you. The numbering resets to 1 inside each bouquet - is there a way to have the numbers continue from one bouquet into the next?

ShaneOC

ShaneOC wrote: »

One new question for you. The numbering resets to 1 inside each bouquet - is there a way to have the numbers continue from one bouquet into the next?

Found it

If you look at the Bouquets section there are a few options on screen with a scroll bar. Scroll down an there is an option "Use alternative channel numbers" (from memory). Click on that and the number appear as they do one the STB.

Looks cool, went to download and no Mac version :mad:

Oat23

SayyiD wrote: »

Feel free to ask, glad to join you and show some support here!

E-Channelizer Team

The feature that lets you easily link a satellite service to an IPTV channel to show EPG info is excellent. Setting it up for someone at the minute. Thanks!

irishgeo

Oat23 wrote: »

The feature that lets you easily link a satellite service to an IPTV channel to show EPG info is excellent. Setting it up for someone at the minute. Thanks!

How do I edit an iptv with this software.

Oat23

irishgeo wrote: »

How do I edit an iptv with this software.

Use the search to find the TV service you want to link with an IPTV channel. Then hold ctrl and drag & drop the service onto the IPTV listing. It's then linked and will display the EPG info from the satellite service.

Oat23

Installed on my gf's laptop, very nice piece of software and I only had a quick play around.

Oat23 wrote: »

Use the search to find the TV service you want to link with an IPTV channel. Then hold ctrl and drag & drop the service onto the IPTV listing. It's then linked and will display the EPG info from the satellite service.

Is there software that needs to be installed to enable iptv to be used on an enigma2 box (Xtrend et10000 running openvix)? I see some mentions of an iptv plug in but then plenty of tutorials that just appear to import iptv links but don't mention the software?

Snake Plisken

Edith Strong Ash wrote: »

Installed on my gf's laptop, very nice piece of software and I only had a quick play around.



Is there software that needs to be installed to enable iptv to be used on an enigma2 box (Xtrend et10000 running openvix)? I see some mentions of an iptv plug in but then plenty of tutorials that just appear to import iptv links but don't mention the software?

Exactly I have a Vu+Duo2 with Openvix but was wondering what enigma 2 plugin do people use. Thanks

Oat23

If your IPTV comes in the form of a .m3u playlist you don't need any app. You can create a bouquet and add them there. Ask your server owner.

In e-channelizer you click the TV icon next to one of your bouquets to open it, then hit Bouquets on the top menu and then hit Import M3U.

.G.

Malwarebytes premium flagging this program as ransomware. Strange.

nava

superg wrote: »

Malwarebytes premium flagging this program as ransomware. Strange.

Symantec Endpoint Protection also gives warnings about the stand alone file and installer.

SayyiD

superg wrote: »

Malwarebytes premium flagging this program as ransomware. Strange.

That is absolutely a false positive alert. This mostly happens if the program is unknown to the antivirus, e.g private or new development. E-Channelizer is developed using Microsoft framework and trusted libraries, moreover the build machine is always clean and well protected.

To get rid of that alert, add E-Channelizer to the "White list" or "Excluded files" of antivirus. If you really doubt that it is safe, do one of the following:
1. Check the online scan results of VirusTotal and Metascan, or even scan it yourself.
2. Report it to your antivirus vendor to analyze and feedback.

SayyiD

nava wrote: »

Symantec Endpoint Protection also gives warnings about the stand alone file and installer.

WS.Reputation.1 detection is a known "buggy approach" of Symantec Norton! The idea here is that programs are likely safe if they are used by a large percentage of users, and that programs that are not used widely are more likely not to be safe to run on the system. The problem with this approach is that Symantec can quarantine files even if the program's own scanner did not detect malicious code in them.

illdoit2morrow

Oat23 wrote: »

The feature that lets you easily link a satellite service to an IPTV channel to show EPG info is excellent. Setting it up for someone at the minute. Thanks!

Is it just now & next for the epg or full epg?

irishgeo

My problem is I don't have a . M3u file just a iptv.tv file and I can't get it to show up to be edited.

Oat23

illdoit2morrow wrote: »

Is it just now & next for the epg or full epg?

It's the full EPG if you download yours via crossepg.

mightybashful

I've sent some IPTV files using e-channelizer but get this message

'settings have been written to STB, but not reloaded'

how do I fix this?

Oat23

mightybashful wrote: »

I've sent some IPTV files using e-channelizer but get this message

'settings have been written to STB, but not reloaded'

how do I fix this?

If they have been written then they should appear after restarting the box. Not sure why reloading the channel list failed. Works for me everytime. What box/image?

mightybashful

Oat23 wrote: »

If they have been written then they should appear after restarting the box. Not sure why reloading the channel list failed. Works for me everytime. What box/image?

It's a DM800SE. The channels are there (via putTY) as DVB but all appeared greyed out and not worked. I changed to IPTV on e-channelizer (where they work fine on the laptop) and resent to the STB but no changes. I edited another IPTV boquet and again nothing. But a message does flash up on the TV screen saying changes made via e-channelizer etc

thnaks

Oat23

mightybashful wrote: »

It's a DM800SE. The channels are there (via putTY) as DVB but all appeared greyed out and not worked. I changed to IPTV on e-channelizer (where they work fine on the laptop) and resent to the STB but no changes. I edited another IPTV boquet and again nothing. But a message does flash up on the TV screen saying changes made via e-channelizer etc

thnaks

Any IPTV I add to a box is listed as DVB and works fine, strangely. Are you using blackhole by any chance? I think that image has problems with IPTV added as a bouquet.

mightybashful

Oat23 wrote: »

Any IPTV I add to a box is listed as DVB and works fine, strangely. Are you using blackhole by any chance? I think that image has problems with IPTV added as a bouquet.

it's OpenPLi 2.1. Guess something that old could be the issue then?

Oat23

mightybashful wrote: »

it's OpenPLi 2.1. Guess something that old could be the issue then?

Yeah that's probably it! Update to 4.0 if you can.

mightybashful

Oat23 wrote: »

Yeah that's probably it! Update to 4.0 if you can.

thanks I'll give a shot tomorrow so. I may have more questions though:D

SayyiD

Oat23 wrote: »

mightybashful wrote: »

'settings have been written to STB, but not reloaded'
how do I fix this?

Not sure why reloading the channel list failed. Works for me everytime. What box/image?

Most probably because of old image or outdated Webif plugin. Alternatively, check the 'Restart Enigma' option when writing to STB.

mightybashful

Could one yous tell me how to get this image on the box please?? It's driving me crazy

Snake Plisken

mightybashful wrote: »

Could one yous tell me how to get this image on the box please?? It's driving me crazy

Are you talking about the latest open PLI image? Quick question is your dreambox 800SE an original or clone?

mightybashful

Snake Plisken wrote: »

Are you talking about the latest open PLI image? Quick question is your dreambox 800SE an original or clone?

it's a clone. When I hold the power button and restart it doesn't return an IOP address - it just says DCHP

Snake Plisken

mightybashful wrote: »

it's a clone. When I hold the power button and restart it doesn't return an IOP address - it just says DCHP

So restart your. dreambox normally go into settings network and check current setting and see what the IP address is currently that will be the up address to type into browser next time you restart and hold the power button and dhcp stop type the IP into your browser and it should bring up the flash screen just make sure you have downloaded a clone modified image or you could brick your box

mightybashful

Snake Plisken wrote: »

So restart your. dreambox normally go into settings network and check current setting and see what the IP address is currently that will be the up address to type into browser next time you restart and hold the power button and dhcp stop type the IP into your browser and it should bring up the flash screen just make sure you have downloaded a clone modified image or you could brick your box

thanks Snake. Although it just tries to load webcontrol on my browser, then produces an error when I put the IP in.

I probably should add I'm doing this over wifi. I'll try with a wall plug tomorrow in case this is the issue

Snake Plisken

mightybashful wrote: »

thanks Snake. Although it just tries to load webcontrol on my browser, then produces an error when I put the IP in.

I probably should add I'm doing this over wifi. I'll try with a wall plug tomorrow in case this is the issue

Possibly I usually do mine via Ethernet cable also it sounds like the box isn't going into boot loader mode it should say stop dhcp and the Ethernet address of the box the stop message should stay on the oled display when you type the address into the web browser it should bring up the firmware update webinterface sure keep at it and let us know how you get on
Just to clarify
1) box fully powered off via power switch at back
2) hold power button in on front don't let go
3) turn the box back on with power switch at back
4) keep finger on power button until you see the word STOP on the oled panel and it should show the IP address as well
5 open browser window and type that IP address and image update page should load

mightybashful

Snake Plisken wrote: »

Possibly I usually do mine via Ethernet cable also it sounds like the box isn't going into boot loader mode it should say stop dhcp and the Ethernet address of the box the stop message should stay on the oled display when you type the address into the web browser it should bring up the firmware update webinterface sure keep at it and let us know how you get on
Just to clarify
1) box fully powered off via power switch at back
2) hold power button in on front don't let go
3) turn the box back on with power switch at back
4) keep finger on power button until you see the word STOP on the oled panel and it should show the IP address as well
5 open browser window and type that IP address and image update page should load

thanks Snake. Getting there

one last problem (I Hope) - the images I tried so far shows incorrect architecture

any chance you DM me the one you got working?

Snake Plisken

mightybashful wrote: »

thanks Snake. Getting there

one last problem (I Hope) - the images I tried so far shows incorrect architecture

any chance you DM me the one you got working?

I used to get my clone images here http://www.sat-universe.com/forumdisplay.php?f=486

Have a look there for suitable image they are usually official images that have been patched to work on the clone boxes

mightybashful

Snake Plisken wrote: »

I used to get my clone images here http://www.sat-universe.com/forumdisplay.php?f=486

Have a look there for suitable image they are usually official images that have been patched to work on the clone boxes

thanks will check now. I found a black hole image earlier and used that. Disaster!! Now my e2 doesn't work

yellowking

I have UK working perfectly with Echannelizer but whenever I try to go to all Sats it defaults to just 28.2e I have downloaded the full satellite.xml list from Lyngsat but I can't see where to add other sats to my default listing.
Can anyone please advise ?

mightybashful

yellowking wrote: »

I have UK working perfectly with Echannelizer but whenever I try to go to all Sats it defaults to just 28.2e I have downloaded the full satellite.xml list from Lyngsat but I can't see where to add other sats to my default listing.
Can anyone please advise ?

What box have you? And where's your dish pointing?

yellowking

Dish is pointing to 28.2 but I have IPTV from around the world I want to get EPG for. Evo Mini running openatv iPab

patrick the king 1

hi does anyone know how to drag and drop a group of channels, i have been setting up my iptv , but i have only been able to drag and drop one channel at a time,which takes forever. i know it can be done because ive seen people doing it on youtube, but for some reason they dont explain how they are doing it. very frustrating.

ShaneOC

patrick the king 1 wrote: »

hi does anyone know how to drag and drop a group of channels, i have been setting up my iptv , but i have only been able to drag and drop one channel at a time,which takes forever. i know it can be done because ive seen people doing it on youtube, but for some reason they dont explain how they are doing it. very frustrating.

Hold down the 'shift' key (while selecting channels with the mouse) to select multiple channels in a block or hold the 'ctrl' key (while selecting channels with the mouse) to select multiple channels that are not next to each other.

ShaneOC

yellowking wrote: »

Dish is pointing to 28.2 but I have IPTV from around the world I want to get EPG for. Evo Mini running openatv iPab

It would be great to get a straight forward guide on how to do this!

patrick the king 1

Anyone know a quicker way of asigning the epg other than pressing the + on the 28.2 satellite and searching through the corresponding stations.

ShaneOC

patrick the king 1 wrote: »

Anyone know a quicker way of asigning the epg other than pressing the + on the 28.2 satellite and searching through the corresponding stations.

On an older version it was possible to drag and drop from the main satellite list. That doesn't seem to be working anymore.

OkeyDoke12

Can echannelizer be used to enable me to pause and record IPTV? Currently I can't pause vod or IPTV