If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Virgin Media Hub - Modem Mode + Tomato

Pelicannon · 2017-02-23 22:50:55

Anyone using this combination? I have IPv4 provisioned by Virgin media on my VM hub (the white one) and I have enabled modem mode but my tomato router never seems to get a WAN IP. The configuration in use is DHCP on the wan port - I assume this is correct? Are there additional steps installed to get this working usually?

23-02-2017 11:50pm

#1

Pelicannon

Registered Users Posts: 26 ✭

Join Date: February 2017

Posts: 25

Anyone using this combination?
I have IPv4 provisioned by Virgin media on my VM hub (the white one) and I have enabled modem mode but my tomato router never seems to get a WAN IP.

The configuration in use is DHCP on the wan port - I assume this is correct?
Are there additional steps installed to get this working usually?

0

Comments

#2 20-03-2017 8:43pm

Ellul

Registered Users Posts: 9 ✭

Join Date: July 2016

Posts: 7

Hi Pelicannon. I'm not using the newer virgin media hub but I am using a Tomato router with an older virgin (UPC) cisco modem/router in bridge mode. Assuming you are not a VM business customer with a static IP address, then DHCP for the WAN is correct. Set the MTU to default and disable 'route modem IP' (ie enter 0.0.0.0). Disable IPv6, save and reboot both devices and you should obtain a WAN connection.

0