Swapping Chainrings Ultegra 6700 series

cyfac

Hi All i am looking to change out a compact set up on a 10 speed ultegra 6700 to a 53 39 set the BCD is 110mm is it possible to get chain rings to suit or will i have to look at changing out the full crankset. Any help would be greatly appreciated.

elchupanebrey

cyfac wrote: »

Hi All i am looking to change out a compact set up on a 10 speed ultegra 6700 to a 53 39 set the BCD is 110mm is it possible to get chain rings to suit or will i have to look at changing out the full crankset. Any help would be greatly appreciated.

I think you have to change the full chainset. I have an old one you can have FOC to take the spider off if you want. The rings are fairly worn but might be ok for a while. Otherwise you will have to change the rings. Either that or a new 5700 105 chainset might be cheaper than 2 new rings

Eamonnator

39-52 any good?

http://www.ebay.ie/itm/NEW-STRONGLIGHT-COMPACT-110BCD-CHAINRINGS-34-52t-/371264753894?var=&hash=item56711a90e6:m:mV7KDqBy3VtVkbiHScTzZpw