Help identifying oven.

honda boi

So the ovens element has giving up.
Think the ovens 12 years old as that's how old the house we renting is.
Problem is there's no model/serial number anywhere on the oven to get a replacement.
I've checked everywhere and nothing.
I found a bit of plastic that was destroyed that Probably had the serial number but is burned away.
Can anyone tell from a pic of the front of the oven and the element itself?

cnocbui

Might be one of these:

https://www.google.ie/search?tbm=isch&source=hp&biw=1568&bih=920&q=candy+oven+element&oq=candy+oven+element&gs_l=img.3..0i30k1j0i24k1l2.188.4690.0.4876.18.15.0.0.0.0.507.1476.2-1j1j1j1.4.0....0...1.1.64.img..14.4.1475...0j0i8i30k1.0.J1qckok6Djs

crasy dash

Don't know it off the top of my head but that's a standard element in a lot of candy creda beko appliances hardest bit was removing it

Exsparetise in Tullamore would be able to tell you if you called them and sent them an email with an picture of the element.
Most important thing is the connector tab and overall dimension once you have that you'll get a replacement no problem.

I know it might be worn off but on the front of the element sometimes you can see the wattage and maybe a code starting with Ele

honda boi

cnocbui wrote: »

Might be one of these:

https://www.google.ie/search?tbm=isch&source=hp&biw=1568&bih=920&q=candy+oven+element&oq=candy+oven+element&gs_l=img.3..0i30k1j0i24k1l2.188.4690.0.4876.18.15.0.0.0.0.507.1476.2-1j1j1j1.4.0....0...1.1.64.img..14.4.1475...0j0i8i30k1.0.J1qckok6Djs

Ye they all look the same but wasn't sure if there was little differences in them.

bee06

If you are renting the house it's the landlords responsibility to fix it.

honda boi

crasy dash wrote: »

Don't know it off the top of my head but that's a standard element in a lot of candy creda beko appliances hardest bit was removing it

Exsparetise in Tullamore would be able to tell you if you called them and sent them an email with an picture of the element.
Most important thing is the connector tab and overall dimension once you have that you'll get a replacement no problem.

I know it might be worn off but on the front of the element sometimes you can see the wattage and maybe a code starting with Ele

Went to a few places around here but all said they needed a serial number.
Found these on eBay with the same dimensions
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F300902118352
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F351766003607
Was unsure if the wattage mattered as there's a few other lower wattage ones but it shouldn't make a real difference. Only in how quick it heats up.
A lot cheaper on eBay then a few places that quoted me
Element itself has no markings on it anywhere unfortunately.

honda boi

bee06 wrote: »

If you are renting the house it's the landlords responsibility to fix it.

Landlord will take ages to do anything or just tell me to do it.

crasy dash

honda boi wrote: »

Went to a few places around here but all said they needed a serial number.
Found these on eBay with the same dimensions
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F300902118352
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F351766003607
Was unsure if the wattage mattered as there's a few other lower wattage ones but it shouldn't make a real difference. Only in how quick it heats up.
A lot cheaper on eBay then a few places that quoted me
Element itself has no markings on it anywhere unfortunately.

I know where I work if you come in we just have a wall full and match them that way and if in doubt contact the boys in Tullamore who ask for an email with measurements on it.

Regarding the wattage I'd be fairly confident that the 3 turn element are 2500w that's not even the load of a modern kettle.
If you take a measurement of the diameter and post it I'll ask in work tomorrow what one you need.

honda boi

crasy dash wrote: »

I know where I work if you come in we just have a wall full and match them that way and if in doubt contact the boys in Tullamore who ask for an email with measurements on it.

Regarding the wattage I'd be fairly confident that the 3 turn element are 2500w that's not even the load of a modern kettle.
If you take a measurement of the diameter and post it I'll ask in work tomorrow what one you need.

Thanks lad.
Length(end of bracket holding terminals to opposite side) 215mm
Width: 195mm
Terminal distance apart is 25mm
Let me know if there's another measurement you need.

crasy dash

Have an email sent so just waiting for one of the lads to get back to me if I have any update I'll post here.

crasy dash

They came back and said that a qualtex ele 6256 is the one they would recommend just like the one in the link below
https://www.ransomspares.co.uk/parts/cookers-hobs/whirlpool/compatible-fan-element/120175.htm

it doesnt match up 100% with your dimensions so the only option would be
If you can get one of those in a local storeand physically match them up and compare
Cant be 100% sure but it might be a start

honda boi

Just to update lads.
Bought this one from eBay for about €10.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F300902118352
Its working perfectly for now.
Haven't done much cooking but its working.

crasy dash

Good result !! Nice and cheap as well