Squak-

2012paddy2012

Hkc quantum
Lads here very helpful already in my alarm
Many thanks indeed -

Just on the squak -
System opts menu
Arming options
Arm squak
Enabled - when I set with key fob I hear the
RKP activating - showing alarm set -

I had a similar system years ago and you could enable Saab / leds to flash - which would be better

Went through the manual - RF - devices -
Can’t see an option to - use the Saab / leds ?
Thks
Paddy

altor

2012paddy2012 wrote: »

Hkc quantum
Lads here very helpful already in my alarm
Many thanks indeed -

Just on the squak -
System opts menu
Arming options
Arm squak
Enabled - when I set with key fob I hear the
RKP activating - showing alarm set -

I had a similar system years ago and you could enable Saab / leds to flash - which would be better

Went through the manual - RF - devices -
Can’t see an option to - use the Saab / leds ?
Thks
Paddy

For the RF bell you go into RF bell options, squak.

2012paddy2012

altor wrote: »

For the RF bell you go into RF bell options, squak.

In the : RF DEVICES
RF DEVICE OPTS
SABB OPTS

IS THST IT ?
Can’t see “ squak”!!

altor

2012paddy2012 wrote: »

In the : RF DEVICES
RF DEVICE OPTS
SABB OPTS

IS THST IT ?
Can’t see “ squak”!!

Apologies, if you are using a keyfob then its set in that users keyfob options, not bell.
This will sound the internal bell and the strobe on external bell should activate for 2 seconds when systems arms using the fob.

2012paddy2012

altor wrote: »

Apologies, if you are using a keyfob then its set in that users keyfob options, not bell.
This will sound the internal bell and the strobe on external bell should activate for 2 seconds when systems arms using the fob.

I’ll try it now thanks a mill - RKP sounds ok can hear it from outside it was the leds/siren I want thanks Altor

2012paddy2012

2012paddy2012 wrote: »

I’ll try it now thanks a mill - RKP sounds ok can hear it from outside it was the leds/siren I want thanks Altor

RF DEVICES
RF DEVICE OPTS
RF KEYFOB OPTIONS - yes
Then I’m seeing - U01 MAIN CODE / Rf keyfob has RF ID
THEN
HASH AND STAR KEY ARE SHOWING NOTHING

altor

2012paddy2012 wrote: »

RF DEVICES
RF DEVICE OPTS
RF KEYFOB OPTIONS - yes
Then I’m seeing - U01 MAIN CODE / Rf keyfob has RF ID
THEN
HASH AND STAR KEY ARE SHOWING NOTHING

Should be more in that option, code unset, duress, duress bell ect..

altor

2012paddy2012 wrote: »

I’ll try it now thanks a mill - RKP sounds ok can hear it from outside it was the leds/siren I want thanks Altor

If you heard the siren before I'm presuming the strobe and internal bell shared the same wires.

2012paddy2012

altor wrote: »

If you heard the siren before I'm presuming the strobe and internal bell shared the same wires.[/
No it’s a direct feed to 12 v in Saab
With back up battery - the tamper is just the lid tamper -
So that’s most likely the issue so as to why it’s not working - I’ll leave it thanks

altor

2012paddy2012 wrote: »

altor wrote: »

If you heard the siren before I'm presuming the strobe and internal bell shared the same wires.[/
No it’s a direct feed to 12 v in Saab
With back up battery - the tamper is just the lid tamper -
So that’s most likely the issue so as to why it’s not working - I’ll leave it thanks

No problem