Converting old LV catenary cable lighting system to LED

TJSparks

Hi all, I have a client with a 20 year old LV double catenary wire halogen lighting system with a failed transformer and they'd like to keep it, and I'm wondering if it's possible to replace the old big transformer with an LED driver and lamps to match?

Thanks.

10-10-20

It's already ~12v AC, right, with just a blown TX? Are the bulbs MR12?

If so, yes, I have my shed lit using a DC battery supply into 4x MR12 LED bulbs. The input of the bulbs has a full-wave rectifier, so the polarity isn't critical. Just connect up a suitable 12V lighting DC TX and install the 12v LED bulbs and away you go.

https://www.screwfix.ie/p/aurora-12v-constant-voltage-led-driver-25w/4338t

Or if you want to go with 12v AC, then this will work with the same 12v LED's (but possibly oversized):

https://www.screwfix.ie/p/robus-12v-electronic-selv-lighting-transformer-35-105w-va/92658?gclid=Cj0KCQjw5oiMBhDtARIsAJi0qk1GU_dW2M3NmTDra_X-uMdWbzif44O_X1V4xveHWLGCUV-WixOmfSAaAtfyEALw_wcB&gclsrc=aw.ds#product_additional_details_container

Just check / modify the AC/DC labeling on the fixtures afterwards.