Strip of brass - rough idea of price

chabsey

Have asked in the engineering forum and was suggested I check here. I'm looking for a ball park figure of the cost of getting a 2m long 10cm wide strip of brass to cover a gap in flooring. I imagine 1 - 1.5mm would be enough thickness, anyone have any idea of what kind of money getting something like that made up would cost?

Doop

I would check for an off the shelf product to be honest...

Heres a 1m strip... would be awful to have a break in the strip?

https://www.lenehans.ie/brass-flat-strip-10mm-x-2mm-x-1.html?gclid=Cj0KCQiAqsitBhDlARIsAGMR1RgHwHHXl4O-OAqN7nDot4NsooB6NtGRMk_NCRQSqDY2c9yEX18RMD0aAp8YEALw_wcB

heres a uk company only 1.8m long tho.

https://woodpeckerflooring.co.uk/product/design-strips/

chabsey

https://www.boards.ie/discussion/comment/121670005#Comment_121670005

Thanks, it's for saddle board replacement so it'd need to be 2m long and 10cm wide, very hard to get anything close to that off the shelf from my searches thus far.

The Continental Op

A quick google and I get https://shop.miko.ie/index.php?id=1008&action=list&categories_id=15 only 5cm width and meter lengths but contact then for longer. Looks like you won't get any change out of €100 and probably €200 if you can find 10cm wide. Obviously cheaper if you can get it thinner.

Doop

Ah right sorry misread your measurements - try some of the steel fabricators around.

The Continental Op

Try these guys http://www.jameshealy.ie/docs/JHL%20Catalogue%20V3.pdf brass is obviously their thing. They list a 100mm x 3mm bar.

chabsey

https://www.boards.ie/discussion/comment/121670583#Comment_121670583

They looked good, but turns out they closed last year :(