Bench/seating ideas

BullBauld

Hi looking for ideas how to best finish off this area with a bench or seating.

Looking for a floating look if possible, what would be easiest way to achieve this?

It's 2.4m long.

Thanks.

10-10-20

https://www.boards.ie/discussion/2058405686/bench-seating-ideas

Sweet. Nice work.

This (without the swing part, obvs!) in beech wood:

rje66

20231126_163257.jpg

20220708_110410.jpg

20210910_113032.jpg

Few from some of my jobs

Perks

Obvs use the central column as a load bearer. If your using timber thats packed close together you could prob get away with express anchoring some 4x2 into the two planter walls. it would still look floaty. Just measure the space, drop your timber on the column and then find out where you need to postion your 4x2's.

Alternatively, also easy would be pegging in each legth of timber into planter walls.

12mm rebar cut to 200mm pegs

Masonary and timber drill bit set to 110mm depth

few tubes of Rawlplug R-KEM II Styrene-Free Polyester Resin

Would you consider a

https://youtu.be/OimLVY3XqHM?si=zN3vmW3ZbAr76zbg

BullBauld

https://www.boards.ie/discussion/comment/123342417#Comment_123342417

Looks great. What sort of bracket did you use for the floating bench in the second picture?

rje66

17443043172931855564372837246283.jpg

Welded up a few of these. I fix a bit of timber to the tops and fix from the top. Don't have the bit that fixes to the wall too long as you don't want to see the bottom of it. If poss have a bit of LED strip lights under it. The effect is great. See pic of top of timber(Teak or iroko) after fixing.

rje66

Pic Below

rje66

17443118065355876548876930570175.jpg

The top