Help with ADSL modem

molinaalexis

Will a Dynamode ADSL-PCI-C Modem good for the Irish system standard


Features
Product Description DSL modem
Max Transfer Rate 8 Mbps
Digital Signaling Protocol ADSL
Dimensions (WxDxH) 12 cm x 7.8 cm x 2 cm
Connectivity Technology Cable
Compliant Standards ITU G.992.1 (G.DMT), ITU G.992.2 (G.Lite), ANSI T1.413 Issue 2
Enclosure Type Plug-in card
Device Type DSL modem - PCI
System Requirements Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows Millennium Edition
Product Display | Features | Specifications



Specifications
Modem

Max Transfer Rate / 56K Technology 8 Mbps
Digital Signaling Protocol ADSL
Connectivity Technology Cable
Compliant Standards ITU G.992.1 (G.DMT), ITU G.992.2 (G.Lite), ANSI T1.413 Issue 2
Interface Type PCI
Environmental Parameters

Humidity Range Operating 5 - 95%
Max Operating Temperature 40 °C
Min Operating Temperature 0 °C
Expansion / Connectivity

Port(s) Total / Connector Type 1 x modem - ADSL
Software / System Requirements

Min Processor Type Intel Pentium 133 MHz
Peripheral / Interface Devices CD-ROM
Min Hard Drive Space 2 MB
Min RAM Size 32 MB
Min Operating System Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows Millennium Edition
Expansion / Port(s) Required

Slot(s) Required 1 x PCI
Miscellaneous

Compliant Standards CE, UL
General

Height 2 cm
Depth 7.8 cm
Width 12 cm
Enclosure Type Plug-in card
Device Type DSL modem

sceptre

Moving to Nets/Comms

longword

Should work in theory. Both DSL providers use G.dmt. Sitting on top of G.dmt, Eircom uses RFC2684 ethernet bridging, and on top of that PPPoE. ESAT use PPPoA. I'd be very surprised if the modem drivers didn't support all of these standards.

santalives

i would verify what encapsulation types the modem actually supports as this will make life easier for you in th long run as you may also have to get a pppoe client or pppoa client if you area not using xp or osx