Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

GDS300 Dig sp/dif output possible

  • 09-05-2003 8:14am
    #1
    telecinesk
    Registered Users, Registered Users 2 Posts: 617 ✭✭✭


    Hi Lads,
    While visiting a colleague with this Oven Receiver that was giving No Signal Received probs on H transponders I noticed the sound chip is a CS4922. Having replaced the LNB and all well I pursued this chip.

    That chip has an sp/dif output on Pin5. I have same in my Nokia 9600 and thanks to another site I added an optical output and also an RCA(Phono) socket with great results.
    In the Grundig, Pin 5 is free, its just soldered on the pcb with nothing connected to it.(SMALL BEWARE)

    Soldering onto Pin 5 isnt easy but I managed with a decent iron > by bending the wire in position pre-tinned and taped across the top of the chip.. The rest is up to some nerve and finding 5v on the board....

    If an RCA socket will do then all you need is Pin5 and ground>

    At your own risk!!! Dont blame me>

    Enclosed is a modified graphic for adding the TOTX optical transmitter which I took from the dvb2000 site.


Advertisement