Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

problem with netsource and Dlink DSL-300G+

Options
  • 04-06-2003 11:28pm
    #1
    gbcodublin
    Closed Accounts Posts: 1 ✭


    I just got hooked up with netsource soho package and bought a DLink DSL-300G+ modem.

    The adsl line appears to be active (installed microfilters etc and the line status indicator is a steady green on the modem)

    I've tried authenticating with PAP and CHAP but with no success.
    All I get is "PPPoE server not found".

    Similar postings about DSL 504 mention changing the "NAT" settings but the config pages for the 300G+ are pretty simple and don't give you any option

    Below is the configuration summary from the web-setup page.

    Any ideas/suggestions?


    Summary


    PPP Information
    Connection Type PPPoE
    Login User Name XXX@netsource.ie

    { an IP address was assigned by netsource but with PPPoE you cannot enter it manually}

    IP Address 0.0.0.0
    Gateway 0.0.0.0
    Connection Status Disconnect

    PVC
    VPI 8
    VCI 35

    ADSL Line Status
    Operation Path Interleave
    Operation Mode G.DMT
    Upstream 128 Kbits
    Downstream 512 Kbits

    Current Firmware Version
    {this appears to be the latest version}
    Current Firmware Version R2.05.b4t9uk
    ADSL driver Version Annex_A(T.79.4.7)


Comments

  • Options
    #2
    Jorinn
    Closed Accounts Posts: 781 ✭✭✭Jorinn


    Originally posted by gbcodublin
    I just got hooked up with netsource soho package and bought a DLink DSL-300G+ modem.

    The adsl line appears to be active (installed microfilters etc and the line status indicator is a steady green on the modem)

    I've tried authenticating with PAP and CHAP but with no success.
    All I get is "PPPoE server not found".

    Similar postings about DSL 504 mention changing the "NAT" settings but the config pages for the 300G+ are pretty simple and don't give you any option

    Below is the configuration summary from the web-setup page.

    Any ideas/suggestions?


    Summary


    PPP Information
    Connection Type PPPoE
    Login User Name XXX@netsource.ie

    { an IP address was assigned by netsource but with PPPoE you cannot enter it manually}

    IP Address 0.0.0.0
    Gateway 0.0.0.0
    Connection Status Disconnect

    PVC
    VPI 8
    VCI 35

    ADSL Line Status
    Operation Path Interleave
    Operation Mode G.DMT
    Upstream 128 Kbits
    Downstream 512 Kbits

    Current Firmware Version
    {this appears to be the latest version}
    Current Firmware Version R2.05.b4t9uk
    ADSL driver Version Annex_A(T.79.4.7)
    Ah-ha, mine doesn't fking work either, but I have up/downstream of 0.


Advertisement