HKC alarm -- auto set

buzz11 · 24-04-2022 9:26pm #1

Could anyone guide me on how I can program my alarm to auto set every night?

Its a HKC with black keys on the keypad and hinged cover

TIA

altor · 25-04-2022 7:57pm

https://www.boards.ie/discussion/2058243091/hkc-alarm-auto-set

Go into engineer mode, timers menu. event timers.

Set type to what you want to arm, full/part.

Then set time and days.

buzz11 · 16-05-2022 1:42pm

https://www.boards.ie/discussion/comment/118975875#Comment_118975875

Thats great thanks, how do I automatically set it to disarm e.g. arm at 22:00 and disarm at 08:00?

I see an option auto-open and auto close -- it asks open start time and open finish time -- what is that asking?

also under autoarm it asks for an interval...what does that mean?

thanks in advance 👍️

altor · 16-05-2022 4:38pm

https://www.boards.ie/discussion/comment/119070390#Comment_119070390

You cannot set the disarming of the system like that, it needs to be done with a code.

That is for unexpected open/close. It can be logged and sent to a monitoring station if monitored.

This is the time all the the zones must be closed for before an auto arm of the system.

buzz11 · 16-05-2022 8:08pm

https://www.boards.ie/discussion/comment/119071339#Comment_119071339

OK that makes sense all right.

We have our garage on a separate zone to the house and often forget to part set that area so I was hoping it would auto-set at night and unset in the morning.

altor · 17-05-2022 9:19pm

https://www.boards.ie/discussion/comment/119072105#Comment_119072105

If areas are setup then you can have it set at a certain time.

HKC alarm -- auto set

Comments