Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Sunsynk (DEYE) Hybrid Inverters

  • 09-10-2022 11:57am
    #1
    Registered Users, Registered Users 2 Posts: 2,472 ✭✭✭


    I wonder if anyone on here installed any Deye/Sunsink (they might actually be the same thing/clone) on single phase that can draw up to 200A from the batteries, the 7 or 8 kw versions. One of these would be handier (cheaper too) to install than multiple sofars, you need 3 to get 200A.

    Specs here: https://deye.com/product/sun-5-6k-sg01lp1-us-sun-7-6-8k-sg01lp1-us-eu-5-8kw-single-phase-2-mppt-hybrid-inverter-low-voltage-battery/

    1. Would the 8kw inverter even be "allowed"/certified for Ireland
    2. Wonder if that 190A charge/discharge limit is what Solis do with their 100A and then limited to 70A after 15mins (still from a drop from 190A to 100A is still plenty to cover 95% of scenarios)
    3. Are the the Deyes any reliable?
    4. How's the automation with them? You can buy some software from here https://solar-assistant.io/ that runs on a pi and gives you real time values but I suspect there's a ton of other ways to integrate with Home Assistant as well courtesy of github etc

    More connection options :

    https://kellerza.github.io/sunsynk/

    It can connect via serial modbus or via the Solarman Wifi adapter. It is an addon for home assistant though (so HA is needed)


    Some additions from the middle of the thread, Modbus meters:

    From Unkel, Here

    "Eastron SDM230 fitted today

    Manual was incorrect with the CAT5 cable pinout, tried several combinations, was about to give up, one last try with the last suggestion from @graememk - and then it worked 😀

    Readings are perfect, this is the first time ever that my readings are spot on the same as the Myenergi clamp on the incomer (that I know is correct)

    So, for anyone else out there, we were using the T568B standard of CAT5 cable pinout. Standard crimped plug in "RS485" labelled port of Sunsynk (bottom right of the six ethernet ports), then pin 5 - blue white, (RS485 A) and pin 6 blue (RS485 B) on the meter (that is the utmost left pin 5 and the second from the left pin 6)

    RS485A is 5, RS485B is 6

    Found the pdf with the correct wiring here: https://www.sunsynk.org/post/eastron-meters-do-you-need-one

    Pin 5 on this is (blue white) is rs485A, Pin 4 (Blue) is rs485B

    Post edited by graememk on


«13456718

Comments

Advertisement