Nugent Utility Trailer

dp639 · 06-03-2023 1:26pm #1

Hi,

I have this trailer 10+ years but recently I've encountered a brake issue.

When I reverse the wheels seem to lock - I think its all of them so I'm ruling out a brake shoe issue with a particular wheel or something.

Is there something to adjust or is it likely something is broken? Also the brakes seem to be very sensitive at the moment and it's actually hard to avoid the trailer skidding when coming to a stop.

Thanks in advance for any advice!

wrangler · 06-03-2023 1:59pm

https://www.boards.ie/discussion/2058287071/nugent-utility-trailer

is there a gas damper in the drawbar, if there is it probably gone weak and needs new one.

something like this, there's different strengths.

https://parts.gkennedyagrisales.com/collections/nugent-trailer-parts/products/knott-avonride-damper-2700kg-to-3500kg

dp639 · 06-03-2023 2:20pm

Cheers for that - that's probably it!! I have it in the shed and will look at it later!

amacca · 06-03-2023 2:31pm

Dunno if the nugent is like the ifor ...but that happened to me and that damper and emergency brake with lever moves under the drawbar and is protected from impact by a quadrant of metal

drawbar had hit the road, bent that protective quadrant/ piece such that the brake didn't automatically disengage and was stuck on

it sounds like the brake is stuck on at any rate and what wrangler said could very well be the cause sp look at the mechanism for engaging the brakes and see is it stuck engaged, then have a look at the cable/cabless and see if they got a yank at some stage

hopeso · 06-03-2023 2:43pm

Almost certainly the damper, as mentioned

dp639 · 07-03-2023 10:16am

Just to update - yes it's the damper, got the coupling off and could push back on the damper by hand - need to get it out and order a new one.

Thanks for the information.

funkey_monkey · 07-03-2023 12:46pm

Whilst you are at it check the wear indicator on the hitch itself. 10+ years might be showing a lot of wear depending on usage.

dp639 · 07-03-2023 3:51pm

https://www.boards.ie/discussion/comment/120324533#Comment_120324533

wasn't aware of a wear indicator - its a Bradley hitch where is the indicator? It doesn't get a lot of use, maybe once or twice a month.

funkey_monkey · 07-03-2023 8:35pm

I'm not sure where it is on a bradley. It's have knott hitches and they have the indicator on the right hand side of the hitch head.

funkey_monkey · 07-03-2023 8:42pm

See this thread here:

https://www.boards.ie/discussion/2058243667/is-this-ball-hitch-gone

hopeso · 07-03-2023 10:03pm

https://www.boards.ie/discussion/comment/120325535#Comment_120325535

I don't think Bradley hitches have a wear indicator, although it's been a while since I had one here.

funkey_monkey · 07-03-2023 10:20pm

https://www.boards.ie/discussion/comment/120327288#Comment_120327288

Taken out from the above linked thread.

dp639 · 08-03-2023 10:37am

Cheers for that - the wear indicator is fine on mine, as I say it doesn't get an awful lot of abuse.

Got the damper out and I can compress it (standing it upright on the floor and pushing down on it), requires a bit of force but nothing to excessive, it then returns to its original position - is it gone or not? I was expecting no resistance.

hopeso · 08-03-2023 2:22pm

https://www.boards.ie/discussion/comment/120328814#Comment_120328814

Sounds like it's gone anyway... Can you compress it all the way? If so, it's definitely gone.

Just be careful to get the correct replacement.

dp639 · 08-03-2023 3:47pm

https://www.boards.ie/discussion/comment/120329864#Comment_120329864

Yes, can compress it all the way. Luckily there was a code on it and I've found the same one online.

Nugent Utility Trailer

Comments